TACKLIFE T8 Pro Jump Starter

A. PARTS AND FUNCTIONAL DESCRIPTION

The TACKLIFE T8 Pro smart car jump starter is designed for convenience and safety. Please read this manual carefully before use.

Key Components:

• 1. Power Button
• 2. Compass
• 3. LCD Screen
• 4. 15V/1A Input
• 5. 12V/10A Output
• 6. 5V/2.1A Output
• 7. Quick Charge Output
• 8. 12V Smart Jumper Socket
• 9. LED Flashlight (Stable/Strobe/SOS)
• 10. Emergency Light

Diagram Description: The device features a compact design with clearly labeled ports and indicators. The LCD screen displays the battery status.

B. LCD SCREEN DISPLAY

The LCD screen provides real-time information about the T8 Pro's status:

• Full Charge: Displays 100%.
• Charging Now: Displays 'IN'.
• Output Usage: Displays 'OUT' when 5V/9V quick charge or 12V output is active.
• Available Outputs: Shows remaining capacity for 5V 2.1A, 12V 10A, and 5V/9V quick charge.

Charging the T8 Pro

Using the Wall Charger:

1. Plug the wall charger into a universal socket.
2. Connect the wall charger to the 15V input port of the T8 Pro.

Using the Car Charger:

1. Plug the car charger into the vehicle's cigarette lighter socket.
2. Connect the car charger to the 15V input port of the T8 Pro.

How To Jump Start 12V Vehicles

Preparation:

1. Plug the blue end of the jump clamps into the T8 Pro's 12V Smart Jumper Socket.
2. Connect the red clamp to the positive (+) terminal of the car battery.
3. Connect the black clamp to the negative (-) terminal of the car battery.

Jump Starting Process:

Post Jump Start:

1. Ensure all connections are correct before starting the engine.
2. After the engine starts, disconnect the clamps from the car battery within 30 seconds.

Using T8 Pro for Other Devices

Charging Cell Phones and Tablets:

1. Plug a USB cable into the USB quick charge output of the T8 Pro.
2. Connect the Micro-USB end to your cell phone or tablet.
3. Press the power button to begin charging.

Powering Other Car Equipment:

1. Plug a cigarette adapter into the 12V/10A output of the T8 Pro.
2. Connect the power cable of the 12V car equipment to the cigarette adapter.
3. Press the power button to power the equipment.

LED Flashlight Instructions

• Flashlight: Hold the power button for a few minutes to turn on the flashlight. Press again to cycle through Stable, Strobe, SOS modes, and then OFF.
• Emergency Light: Press the power button twice quickly to turn on the red emergency light. Press again to turn it OFF.

C. PART LIST

D. TECHNICAL SPECIFICATION

• Model: T8 Pro
• Size: 185*87*40mm
• Weight: 550g
• Battery Capacity: 18000mAh (66.6Wh)
• Output: 5V/9V Quick Charge; 5V/2.1A; 12V/10A; 12V Jumper Socket
• Input: 15V/1A
• Full Charging Time: 4.5h
• Starting Current: 500A (3s), 300A (5s)
• Peak Current: 1200A
• Waterproof Level: IP65
• Working Temperature: -20°C~ 60℃

E. FAQ

• Q: How to turn off the device?
  A: The device has an intelligent detection system and shuts down automatically in 30 seconds when there is no load or it is fully charged.
• Q: How long will it take before the device is fully charged?
  A: It takes about 4.5 hours with the 15V/1A wall charger.
• Q: How many times can T8 Pro charge a cell phone?
  A: This depends on the cell phone's capacity. For example, an iPhone 6 can be charged about 7 times.
• Q: How many times can this device jump start a vehicle when fully charged?
  A: It can jump start a vehicle approximately 25 times.
• Q: What is the lifetime of T8 Pro?
  A: Approximately 3-5 years under general conditions.
• Q: How long can T8 Pro hold a charge?
  A: With its circuit design, the T8 Pro can hold a charge for up to 12 months. To extend the lithium battery's service life, it is recommended to charge it every three months.

F. TROUBLE SHOOTING

If you encounter problems not covered here, please stop using the device and contact TACKLIFE support at support@autotacklife.com.

G. COMPOSITIONS AND AMOUNT OF TOXIC AND HARMFUL SUBSTANCES IN T8 Pro

O: Indicates that all homogeneous materials' hazardous substances content are below the Maximum Concentration Value (MCV) limit specified in Standard 2002/95/EC (RoHS).

H. WARNING

1. Read the instruction carefully before using the device.
2. Keep the device away from children.
3. Do not place the product in environments exceeding 60°C.
4. Do not immerse the product in water.
5. Do not place the product in extremely hot environments or near fire.
6. Do not operate the product in explosive environments (e.g., with flammable liquids, gases, or dust).
7. Do not use the device as a toy.
8. Do not use this device for charging a car battery directly.
9. Do not drop the product. If impacted or damaged, it must be repaired by a qualified technician.
10. Do not use damaged or modified battery packs, as this can lead to unpredictable consequences, including fire, explosion, and injury.
11. Keep away from children during use to reduce risk.
12. Ensure someone is nearby when using the device.
13. Remove metal accessories (rings, bracelets, necklaces) before use to prevent short circuits caused by metal falling into the ports.
14. Ensure the power is above 75% when using it to jump start your car.
15. The product is suitable only for starting 12V gasoline and diesel vehicles. Using it for other purposes or on equipment like airplanes and ships may be dangerous.
16. This device cannot power all 12V automotive products. It can currently power some small automotive electronics, such as portable tire air pumps.
17. Ensure the blue end of the smart jump clamps is fully inserted into the product's 12V car start port when jump starting. Failure to do so may cause the blue end to melt.
18. Use only the provided jump clamps. Stop using if the battery clip or wire is damaged to avoid personal injury (fire, electric shock).
19. Do not use the clamps to power other equipment.
20. Before starting, ensure the interface is free of rust and foreign matter. Connect the device and jump clamps tightly, as a loose connection will affect starting performance.
21. Do not use the device to start the car while it is being charged.
22. Do not attempt to continuously start the car more than 3 times. This can cause overheating and damage the product. Allow a two-minute interval between each start attempt.
23. After successfully starting the car, remove the product from the car battery within 30 seconds to prevent damage.
24. Do not charge the device immediately after using it to jump start the car.
25. Charge the device in an environment temperature between 0°C~45°C.
26. Use the provided wall charger or a charger with the same specifications to charge the device.
27. In extreme cases, the battery may leak. Avoid direct contact with skin. If contact occurs, rinse immediately with soap and water. If it gets into eyes, rinse with cold water for at least 10 minutes and seek medical attention.
28. If the product battery leaks, please recycle it with appropriate equipment immediately.
29. Dispose of lithium battery-based products according to local regulations at the end of their product life.

WARRANTY

The warranty for this product is provided by TACKLIFE. TACKLIFE aims to manufacture products that inspire consumers to live a more convenient and secure lifestyle.

TACKLIFE provides a 2-year warranty and lifetime technical support. For assistance, contact TACKLIFE at any time; support will be provided within 24 hours.

Contact us: support@autotacklife.com

Website: www.tacklifetools.com

Facebook: www.facebook.com/AutoTacklife