HONOR BVL-N49 Quick Start Guide

Model: BVL-N49

Know Your Device

Before using the device, familiarize yourself with its basic operations.

To power on your device, press and hold the power button until the screen turns on.
To power off your device, press and hold the power button, and then touch [power-off symbol].
To restart your device, press and hold the power button, and then touch [restart symbol].
Press and hold the Power and Volume down buttons for more than 10 seconds to force restart your device.

A diagram shows the front and back of the HONOR device. The back view displays a circular camera module with multiple lenses. Below the camera module, the NFC logo is visible. The front view shows a full-screen display with a small circular cutout at the top center for the front camera. On the right side of the device, there are two buttons stacked vertically: the upper button is the Power button, and the lower button is the Volume button. On the bottom edge, there is a USB Type-C port and a headset jack. On the screen, there is a fingerprint sensor area indicated.

Device Components:

1. Volume button
2. Power button
3. Card slot
4. USB Type-C port / Headset jack
5. In-screen fingerprint sensor

[information] Please keep the NFC area close to other devices or objects while using the NFC function.

[information] Check out the pre-installed Tips app and master all the great features on your device.

Getting Started

[warning] Be careful not to scratch your device or hurt yourself when using the eject pin.

Store the eject pin out of the reach of children to prevent accidental swallowing or injury.

Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot).

If your SIM card does not match your device, please contact your carrier.

Follow the instructions in the following figures to set up your device. Please use the eject pin included. Ensure that the card is correctly aligned and its notch is first inserted into the card tray.

Single-SIM card:

Diagram 1: Shows a SIM eject tool being inserted into a small hole on the side of the phone to release the SIM card tray. Diagram 2: Shows the SIM card tray being removed from the phone. The tray has a slot for a nano-SIM card. An arrow indicates the nano-SIM card being placed into the tray, aligning its notched corner with the tray's shape.

Dual-SIM card:

Diagram 1: Similar to the single SIM diagram, showing the eject tool releasing the tray. Diagram 2: Shows the dual SIM card tray. One slot is labeled "nano-SIM 1" and the other "nano-SIM 2". Arrows indicate two nano-SIM cards being placed into their respective slots, aligning their notched corners.

SIM Card Management

Select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app.

[information] 5G and 4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 5G or 4G service.

[information] If this guide is inconsistent with the description on the official website, the latter prevails.

For More Information

If you encounter any problems while using your device, you can obtain help from the following resources:

Visit https://www.hihonor.com to view device information and other information.
Visit https://www.hihonor.com/global/support/ for the most up-to-date contact information for your country or region.
Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulatory information.
Depending on the region or model, some devices are required to receive approval from the Innovation, Science and Economic Development Canada (ISED). If your device is approved by the ISED, you can go to Settings and touch System & updates > Regulatory information to view IC ID. If your device does not have an IC ID, the device has not been authorized for sale in Canada or its territories and may only be brought to Canada for the owner's personal use.

Safety Information

Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.

Operation and safety

[information] To prevent possible hearing damage, do not listen at high volume levels for long periods.
Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.
Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.
In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field.
When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.
The power adapter can supply a rated output of 20V/5A. The phone supports a rated input of 20V/4A.
Unplug the charger from electrical outlets and the device when not in use.
Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode.
Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement.
Your device has been tested in a controlled environment and certified to be splash, water, and dust resistant in specific situations (meets requirements of classification IP68 as described by the international standard IEC 60529). Splash, water, and dust resistance are not permanent conditions and resistance might decrease as a result of normal wear. Do not charge your device in wet conditions. Visit https://www.hihonor.com/global/support/ for detailed description of this function.
Reverse wireless charging works at maximum power when the device battery level is kept above 90% and a power adapter that supports HONOR SCP charging protocol, e.g., a HONOR 100W SuperCharge adapter or HONOR 66W SuperCharge adapter, is used with the standard HONOR charging cable.

Disposal and Recycling Information

The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.

For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://www.hihonor.com/.

RF Exposure Information

The World Health Organization has stated that exposure can be reduced by limiting your usage or simply using a hands-free kit to keep the device away from the head and body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

For the countries that adopted the SAR limit 1.6 W/kg over 1 gram of tissue.

The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. The highest SAR value reported to the ISED for this device type when using it at the ear is:

Model	SAR (W/kg)
BVL-N49	1.00 W/kg

And when properly worn on the body is:

Model	SAR (W/kg)
BVL-N49	0.54 W/kg

Innovation, Science and Economic Development Canada compliance

Body worn operation

The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

ISED Statement

This device complies with CAN ICES-003 (B)/ NMB-003(B).

This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Restrictions in the 5 GHz band:

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Mexico Compliance:

(This section is only applicable for Mexico.)

The operation of this device is subjected to the following two conditions: (1) This device may not cause harmful interferences; and (2) this device must accept any interferences, including those that may cause an undesired operation.

The device IMEI can be obtained by dialing *#06#.

This equipment does not support the FM radio function. The device has the Cellular Broadcasting Service enabled and activated, you can configure the alert messages through the following menu: Settings > Sounds & vibration > More settings > Wireless Emergency Alerts.

For information about the IFT certification, visit https://www.hihonor.com/global/legal/certification/.

Legal Notice

Trademarks and Permissions

Android is a trademark of Google LLC. LTE is a trademark of ETSI. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honor Device Co., Ltd. is under license. Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS:X, DTS:X Ultra, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.

ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE ACTUAL DEVICE MAY VARY. NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.

Privacy Policy

To better understand how we protect your personal information, please see the privacy policy at https://www.hihonor.com/privacy-policy/worldwide/.

	Honor RMO-NX1 Quick Start Guide: Setup, Features, and Safety A comprehensive guide for the Honor RMO-NX1 smartphone, covering device setup, basic operations, SIM card management, safety precautions, regulatory compliance, and technical specifications. This document is intended to help users get started quickly and safely with their new device.
	Honor WOD-LX2 Quick Start Guide This document provides a quick start guide for the Honor WOD-LX2 smartphone. It covers essential information for setting up and using your device, including device overview, SIM card setup, safety precautions, and regulatory compliance, presented in English.
	Honor ALI-NX1 Quick Start Guide: Setup, Features, and Safety Comprehensive quick start guide for the Honor ALI-NX1 smartphone. Learn how to set up your device, understand its features, and important safety precautions.
	Honor VNE-LX1/LX2/LX3 Quick Start Guide A concise guide for setting up and using Honor VNE-LX1, VNE-LX2, and VNE-LX3 smartphones, covering device features, SIM card installation, safety precautions, and regulatory compliance.
	HONOR Magic6 Pro Quick Start Guide Get started with your HONOR Magic6 Pro smartphone. This guide provides essential setup, operation, and safety information for your new device.
	HONOR LLY-LX1 Quick Start Guide: Setup, Safety, and Features Comprehensive quick start guide for the HONOR LLY-LX1 smartphone. Learn about device setup, SIM card management, essential safety precautions, disposal guidelines, and legal information.
	Honor ANY-NX1 Quick Start Guide: Setup, Safety, and Specifications Get started with your Honor ANY-NX1 smartphone. This guide covers basic operations, SIM card setup, safety precautions, RF exposure, regulatory compliance, and frequency band specifications.
	HONOR ELP-NX9 Quick Start Guide and Safety Information Get started with your HONOR ELP-NX9. This comprehensive guide covers quick start instructions, device features, essential safety information, regulatory compliance, and disposal guidelines. Available in multiple languages.