User Guide for cellgate models including: CWU-U320 Door Controller, CWU-U320, Door Controller, Controller

Scarlett Brown

Quick Install Guide - Gate Depot

cellgate-u320-quickstart 2019
front page
2019
UNIFY CWE-U320
Quick Install Guide
CellGate Support: 972-231-1999 option 2 1

Unify Details & Supported Devices
Max Dimensions: 18" x 6" x 12" (in inches)
Width: 6"

CWU-U320

Length w/ Surge Protector: 18"

Unify Unit

Length: 15"

Camera (up to 4)

Length: 3"
26-bit Wiegand Devices (Up to 4): Card/RFID/Clicker Reader(s) & Keypad(s)

2

CWU-U320

Items Included in Kit

· Unify Unit

· Quick Install Guide

· 12v / 5 Amp power supply (built in)

· Activation & Test Process

· AC transformer (built in)

· Customer Information Packet

**Recommended wiring: 18/6 shielded for main device, and 18/4 shielded for optional wiegand devices**
Unify Unit

Antenna

Command Module
Fuse Box

Router
Ethernet Switch

AC Transformer
Power Supply Wiring

Expansion Board

Important Item

Power Reset Button

AC Power Cable

3

Expansion Board
Relay 1: Main Gate Relay 2: Auxiliary Relay Input 1: Gate Status Input 2: Request to Exit (REX)
26-bit Wiegand Connection
Input Plug
Relay Plug

CWU-U320
3
Flashing LED:
Connection successful: Flashing slowly; 1 second on, 1 second off. No communication to the other components in the box: Flashing quickly.

Expansion Board Default Configuration
26-bit Wiegand Input
replace

Default Functionality:
Upon valid entry of a Wiegand credential,
Relay 1 will be activated by default.
Custom configuration available upon request.

Default Functionality:
Upon activation of Input 2, Relay 1 will
be activated by default.
Custom configuration available upon request.

Important Item

**All wiring drawn should use 18-gauge cable**

4

Gate Wiring Diagram
Gate Operator & Dry Contact Lock

Gate Status Switch

Gate Trigger

CWU-U320

26-bit Wiegand Keypad Wiring

CWU-U320

Enlarged

A/C Transformer

Important Item

**All wiring drawn should use 18-gauge cable**

5

Magnetic Lock Wiring ­ Normally Open
12v Magnetic
Lock

Normally Open: Set jumper on right 2 pins.

Lock Status Switch

Enlarged

CWU-U320

Enlarged

Enlarged

Important Item

**All wiring drawn should use 18-gauge cable**

6

Magnetic Lock Wiring ­ Normally Closed
12v Magnetic
Lock

Normally Closed: Set jumper on left 2 pins.

Lock Status Switch

CWU-U320

Enlarged

Enlarged

Enlarged

Important Item

**All wiring drawn should use 18-gauge cable**

7

CWU-U320
External Camera(s) Wiring
WARNING: DO NOT MAKE ELECTRICAL CONNECTIONS TO CAMERA WITH THE SYSTEM ENERGIZED. THIS WILL DAMAGE THE CAMERA AND IS NOT COVERED UNDER THE CAMERA WARRANTY.
Enlarged

Ethernet for camera can be plugged into any port.

12v Power Connection
Ethernet Connector

Enlarged

Enlarged

Important Item

**All wiring drawn should use 18-gauge cable**

8


Adobe PDF Library 19.12.66