Manuals+

FS Fiber Channel Transceiver Modules Data Sheet

Product Overview

The FS® Fiber Channel Small Form-Factor Pluggable (SFP/SFP+/SFP28/QSFP28) portfolio offers customers a wide variety of high-density and low-power 2G/4G/8G/16G/32G/128G Fibre Channel connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The 2G/4G/8G/16G/32G/128G Fibre Channel modules are the latest generation of Fibre Channel transceiver modules solution based on SFP/SFP+/SFP28/QSFP28 form factor.

Figure 1: Illustration of an 8G SFP+ Optical Fiber Channel module, showcasing its compact design and connector details.

Features and Benefits

  • Hot-swappable input/output device that plugs into a 2G/4G/8G/16G/32G/128G Gigabit Ethernet port.
  • Interoperable with other IEEE-compliant 2G/4G/8G/16G/32G/128GBASE interfaces where applicable.
  • Certified and tested on Cisco, Arista, Juniper, Brocade SFP/SFP+/SFP28/QSFP28 ports for superior performance, quality, and reliability. Refer to the FS Assured Program for Transceivers for more details.
  • Digital optical monitoring (DDM) capability for strong diagnostic capabilities.

Fiber Channel Modules Portfolio

ProductDescriptionConnector type
Q28-128GM-SW4128GBASE SW4 QSFP28 Transceiver, MTP/MPO-12, 100m over OM4 MMFMTP/MPO-12
SFP28-32GSR-8532GBASE SR SFP28 Transceiver, Duplex LC, 100m over OM4 MMFDuplex LC
SFP28-32GLR-3132GBASE LR SFP28 Transceiver, Duplex LC, 10km over SMFDuplex LC
SFP-16GSR-8516GBASE SR SFP+ Transceiver, Duplex LC, 100m over OM4 MMFDuplex LC
SFP-16GLR-3116GBASE LR SFP+ Transceiver, Duplex LC, 10km over SMFDuplex LC
SFP-16GER-5516GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMFDuplex LC
CWxx-16GSFP-4016GBASE CWDM SFP+ Transceiver, Duplex LC, 40km over SMFDuplex LC
DWCxx-16GSFP-4016GBASE DWDM SFP+ Transceiver, Duplex LC, 40km over SMFDuplex LC
SFP-10GSR-858GBASE SR SFP+ Transceiver, Duplex LC, 150m over OM4 MMFDuplex LC
SFP-10GLR-318GBASE LR SFP+ Transceiver, Duplex LC, 10km over SMFDuplex LC
SFP-10GER-318GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMFDuplex LC
SFP-10GER-558GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMFDuplex LC
SFP-10GZR-558GBASE ZR SFP+ Transceiver, Duplex LC, 80km over SMFDuplex LC
SFP-10G-BX8GBASE BiDi SFP+ Transceiver, Duplex LC, 10km over SMFSimplex LC
CWDM-SFP10G-40L8GBASE CWDM SFP+ Transceiver, Duplex LC, 40km over SMFDuplex LC
SFP4G-SW-854GBASE SW SFP Transceiver, Simplex LC, 150m over OM4 MMFDuplex LC
SFP4G-LW-314GBASE LW SFP Transceiver, Simplex LC, 4km over SMFDuplex LC
SFP4G-LW-314GBASE LW SFP Transceiver, Simplex LC, 10km over SMFDuplex LC
SFP-2GSR-852GBASE SR SFP Transceiver, Simplex LC, 300m over OM4 MMFDuplex LC
SFP-2GSR-312GBASE SR SFP Transceiver, Simplex LC, 2km over SMFDuplex LC
SFP-2GIR-312GBASE IR SFP Transceiver, Simplex LC, 10km over SMFDuplex LC
SFP-2GLR-312GBASE IR SFP Transceiver, Simplex LC, 40km over SMFDuplex LC
SFP-2GLR-552GBASE LR SFP Transceiver, Simplex LC, 40km over SMFDuplex LC
SFP-2GL2-552GBASE LR SFP Transceiver, Simplex LC, 80km over SMFDuplex LC

Detailed Product Descriptions

Q28-128GM-SW4

The QSFP28 transceiver supports up to 100m link lengths over multimode fiber (MMF) via MTP/MPO-12 connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 128G.

SFP28-32GSR-85

The SFP28-32GSR-85 Module provides 32GBase-SR throughput up to 100m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 32G.

SFP28-32GLR-31

The SFP28-32GLR-31 Module provides 32GBase-LR throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 32G.

SFP-16GSR-85

The SFP-16GSR-85 Module provides 16GBase-SR throughput up to 100m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 16G.

SFP-16GLR-31

The SFP-16GLR-31 Module provides 16GBase-LR throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 16G.

SFP-16GER-55

The SFP-16GER-55 transceiver provides 16GBase-ER throughput up to 40km over single mode fiber (SMF) using a wavelength of 1550nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 16G.

CWxx-16GSFP-40

The CWxx-16GSFP-40 transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8472 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 16G.

DWCxx-16GSFP-40

The DWCxx-16GSFP-40 transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8472 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 16G.

SFP-10GSR-85

The SFP-10GSR-85 Module provides 8GBase-SR throughput up to 150m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 8G.

SFP-10GLR-31

The SFP-10GLR-31 Module provides 8GBase-LR throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 8G.

SFP-10GER-31

The SFP-10GER-31 transceiver provides 8GBase-ER throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 8G.

SFP-10GER-55

The SFP-10GER-55 transceiver provides 8GBase-ER throughput up to 40km over single mode fiber (SMF) using a wavelength of 1550nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 8G.

SFP-10GZR-55

The SFP-10GZR-55 transceiver provides 8GBase-ER throughput up to 80km over single mode fiber (SMF) using a wavelength of 1550nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 8G.

CWDM-SFP10G-40L

The CWDM-SFP10G-40L transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8472 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 8G.

SFP-10G-BX

The SFP-10G-BX transceiver supports up to 10km link lengths over OS2 SMF and is suitable for 10G Ethernet, CPRI/eCPRI and Data Center applications. This bi-directional unit must be used with another transceiver or network equipment of complementary wavelengths. It is compliant with IEEE 802.3cc, SFP MSA, SFP28 MSA, SFF-8402, SFF-8472, SFF-8432, SFF-8431 and CEI-28G-VSR standards. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters.

SFP4G-SW-85

The SFP4G-SW-85 Module provides 4GBase-SW throughput up to 150m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 4G.

SFP4G-LW-31

The SFP4G-LW-85 Module provides 4GBase-LW throughput up to 4km/10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 4G.

SFP-2GSR-85

The SFP-2GSR-85 Module provides 2GBase-SR throughput up to 300m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 2G.

SFP-2GSR-31

This SFP-2GSR-31 Module provides 2GBase-SR throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 2G.

SFP-2GIR-31

This SFP-2GIR-31 Module provides 2GBase-IR throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 2G.

SFP-2GLR-31

This SFP-2GLR-31 Module provides 2GBase-LR throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 2G.

SFP-2GLR-55

This SFP-2GLR-55 Module provides 2GBase-LR throughput up to 40km over single mode fiber (SMF) using a wavelength of 1550nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 2G.

SFP-2GL2-55

This SFP-2GL2-55 Module provides 2GBase-LR throughput up to 80km over single mode fiber (SMF) using a wavelength of 1550nm via an LC duplex connector. This transceiver is compliant with SFF-8636 standards. Digital diagnostics functions are available via a 2-wire common management interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for fiber communications application up to 2G.

Product Specifications

Electrical Specifications

ProductDescriptionNominal datarate (Gbs)Link meter
Q28-128GM-SW4128GBASE SW4 QSFP28 Transceiver, MTP/MPO-12, 100m over OM4 MMF112.2Gbps100m
SFP28-32GSR-8532GBASE SR SFP28 Transceiver, Duplex LC, 100m over OM4 MMF28.05Gbps100m
SFP28-32GLR-3132GBASE LR SFP28 Transceiver, Duplex LC, 10km over SMF28.05Gbps10km
SFP-16GSR-8516GBASE SR SFP+ Transceiver, Duplex LC, 100m over OM4 MMF14.025Gbps100m
SFP-16GLR-3116GBASE LR SFP+ Transceiver, Duplex LC, 10km over SMF14.025Gbps10km
SFP-16GER-5516GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMF14.025Gbps40km
CWxx-16GSFP-4016GBASE CWDM SFP+ Transceiver, Duplex LC, 40km over SMF14.025Gbps40km
DWCxx-16GSFP-4016GBASE DWDM SFP+ Transceiver, Duplex LC, 40km over SMF14.025Gbps40km
SFP-10GSR-858GBASE SR SFP+ Transceiver, Duplex LC, 150m over OM4 MMF8.5Gbps150m
SFP-10GLR-318GBASE LR SFP+ Transceiver, Duplex LC, 10km over SMF8.5Gbps10km
SFP-10GER-318GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMF8.5Gbps40km
SFP-10GER-558GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMF8.5Gbps40km
SFP-10GZR-558GBASE ZR SFP+ Transceiver, Duplex LC, 80km over SMF8.5Gbps80km
SFP-10G-BX8GBASE BiDi SFP+ Transceiver, Duplex LC, 10km over SMF11.3Gbps10km
CWDM-SFP10G-40L8GBASE CWDM SFP+ Transceiver, Duplex LC, 40km over SMF11.3Gbps40km
SFP4G-SW-854GBASE SW SFP Transceiver, Simplex LC, 150m over OM4 MMF4.25Gbps150m
SFP4G-LW-314GBASE LW SFP Transceiver, Simplex LC, 4km over SMF4.25Gbps4km
SFP4G-LW-314GBASE LW SFP Transceiver, Simplex LC, 10km over SMF4.25Gbps10km
SFP-2GSR-852GBASE SR SFP Transceiver, Simplex LC, 300m over OM4 MMF2.67Gbps300m
SFP-2GSR-312GBASE SR SFP Transceiver, Simplex LC, 2km over SMF2.67Gbps2km
SFP-2GIR-312GBASE IR SFP Transceiver, Simplex LC, 10km over SMF2.67Gbps10km
SFP-2GLR-312GBASE IR SFP Transceiver, Simplex LC, 40km over SMF2.67Gbps40km
SFP-2GLR-552GBASE LR SFP Transceiver, Simplex LC, 40km over SMF2.67Gbps40km
SFP-2GL2-552GBASE LR SFP Transceiver, Simplex LC, 80km over SMF2.67Gbps80km

Optical Specifications

ProductDescriptionTransmit Power (dBm) per laneReceive Power (dBm) per laneTransmit and Receive Wavelength (nm)
Q28-128GM-SW4128GBASE SW4 QSFP28 Transceiver, MTP/MPO-12, 100m over OM4 MMFMinimum: -8.5, Maximum: 2.4Minimum: -10.3, Maximum: 2.4850
SFP28-32GSR-8532GBASE SR SFP28 Transceiver, Duplex LC, 100m over OM4 MMFMinimum: -8, Maximum: 3Minimum: -14, Maximum: 0850
SFP28-32GLR-3132GBASE LR SFP28 Transceiver, Duplex LC, 10km over SMFMinimum: -7, Maximum: 2Minimum: -14, Maximum: 21310
SFP-16GSR-8516GBASE SR SFP+ Transceiver, Duplex LC, 100m over OM4 MMFMinimum: -7.8, Maximum: -1.3Minimum: -10.5, Maximum: 0850
SFP-16GLR-3116GBASE LR SFP+ Transceiver, Duplex LC, 10km over SMFMinimum: -5, Maximum: 2Minimum: -18, Maximum: 21310
SFP-16GER-5516GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMFMinimum: -1, Maximum: 3Minimum: -19, Maximum: 21550
CWxx-16GSFP-4016GBASE CWDM SFP+ Transceiver, Duplex LC, 40km over SMFMinimum: 0, Maximum: 5Minimum: -19, Maximum: 21470 to 1610
DWCxx-16GSFP-4016GBASE DWDM SFP+ Transceiver, Duplex LC, 40km over SMFMinimum: 0, Maximum: 5Minimum: -19, Maximum: 21528.77 to 1563.86
SFP-10GSR-858GBASE SR SFP+ Transceiver, Duplex LC, 150m over OM4 MMFMinimum: -7.3, Maximum: -1Minimum: -11.1, Maximum: 0.5850
SFP-10GLR-318GBASE LR SFP+ Transceiver, Duplex LC, 10km over SMFMinimum: -8.2, Maximum: 0.5Minimum: -14.4, Maximum: 0.51310
SFP-10GER-318GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMFMinimum: 0, Maximum: 5Minimum: -15, Maximum: 11310
SFP-10GER-558GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMFMinimum: -1, Maximum: 4Minimum: -16, Maximum: -11550
SFP-10GZR-558GBASE ZR SFP+ Transceiver, Duplex LC, 80km over SMFMinimum: 0, Maximum: 5Minimum: -23, Maximum: -71550
SFP-10G-BX8GBASE BiDi SFP+ Transceiver, Duplex LC, 10km over SMFMinimum: -8.2, Maximum: 0.5Minimum: -14.4, Maximum: 0.51270 (Tx), 1330 (Rx)
CWDM-SFP10G-40L8GBASE CWDM SFP+ Transceiver, Duplex LC, 40km over SMFMinimum: -1, Maximum: 4Minimum: -6, Maximum: -81470 to 1610
SFP4G-SW-854GBASE SW SFP Transceiver, Simplex LC, 150m over OM4 MMFMinimum: -2, Maximum: 4Minimum: -13, Maximum: 2850
SFP4G-LW-314GBASE LW SFP Transceiver, Simplex LC, 4km over SMFMinimum: -9, Maximum: -3Minimum: -14, Maximum: 2.51310
SFP4G-LW-314GBASE LW SFP Transceiver, Simplex LC, 10km over SMFMinimum: -8.4, Maximum: -1Minimum: -18, Maximum: 21310
SFP-2GSR-852GBASE SR SFP Transceiver, Simplex LC, 300m over OM4 MMFMinimum: -10, Maximum: -3Minimum: -17, Maximum: -3850
SFP-2GSR-312GBASE SR SFP Transceiver, Simplex LC, 2km over SMFMinimum: -7, Maximum: 2.5Minimum: -19, Maximum: -31310
SFP-2GIR-312GBASE IR SFP Transceiver, Simplex LC, 10km over SMFMinimum: -5, Maximum: 0Minimum: -18, Maximum: 01310
SFP-2GLR-312GBASE IR SFP Transceiver, Simplex LC, 40km over SMFMinimum: -1, Maximum: 3Minimum: -30, Maximum: 01310
SFP-2GLR-552GBASE LR SFP Transceiver, Simplex LC, 40km over SMFMinimum: -2, Maximum: 3Minimum: -18, Maximum: 01550
SFP-2GL2-552GBASE LR SFP Transceiver, Simplex LC, 80km over SMFMinimum: -2, Maximum: 3Minimum: -28, Maximum: -71550

Mechanical Specifications

ParameterValue
Module dimension with pull tab (H x W x D)8.5 x 18.35 x 123.41 mm
Module weight (Max)72 g
Module operation temperature0 to 70° C
Storage temperature-40 to 85° C

Warranty

Standard warranty: 5 years.

For more information on FS Returns & Refunds policy, visit https://www.fs.com/policies/warranty.html or https://www.fs.com/policies/day_return_policy.html.

Ordering Information

Part numberDescription
Q28-128GM-SW4128GBASE SW4 QSFP28 Transceiver, MTP/MPO-12, 100m over OM4 MMF
SFP28-32GSR-8532GBASE SR SFP28 Transceiver, Duplex LC, 100m over OM4 MMF
SFP28-32GLR-3132GBASE LR SFP28 Transceiver, Duplex LC, 10km over SMF
SFP-16GSR-8516GBASE SR SFP+ Transceiver, Duplex LC, 100m over OM4 MMF
SFP-16GLR-3116GBASE LR SFP+ Transceiver, Duplex LC, 10km over SMF
SFP-16GER-5516GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMF
CWxx-16GSFP-4016GBASE CWDM SFP+ Transceiver, Duplex LC, 40km over SMF
DWCxx-16GSFP-4016GBASE DWDM SFP+ Transceiver, Duplex LC, 40km over SMF
SFP-10GSR-858GBASE SR SFP+ Transceiver, Duplex LC, 150m over OM4 MMF
SFP-10GLR-318GBASE LR SFP+ Transceiver, Duplex LC, 10km over SMF
SFP-10GER-318GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMF
SFP-10GER-558GBASE ER SFP+ Transceiver, Duplex LC, 40km over SMF
SFP-10GZR-558GBASE ZR SFP+ Transceiver, Duplex LC, 80km over SMF
SFP-10G-BX8GBASE BiDi SFP+ Transceiver, Duplex LC, 10km over SMF
CWDM-SFP10G-40L8GBASE CWDM SFP+ Transceiver, Duplex LC, 40km over SMF
SFP4G-SW-854GBASE SW SFP Transceiver, Simplex LC, 150m over OM4 MMF
SFP4G-LW-314GBASE LW SFP Transceiver, Simplex LC, 4km over SMF
SFP4G-LW-314GBASE LW SFP Transceiver, Simplex LC, 10km over SMF
SFP-2GSR-852GBASE SR SFP Transceiver, Simplex LC, 300m over OM4 MMF
SFP-2GSR-312GBASE SR SFP Transceiver, Simplex LC, 2km over SMF
SFP-2GIR-312GBASE IR SFP Transceiver, Simplex LC, 10km over SMF
SFP-2GLR-312GBASE IR SFP Transceiver, Simplex LC, 40km over SMF
SFP-2GLR-552GBASE LR SFP Transceiver, Simplex LC, 40km over SMF
SFP-2GL2-552GBASE LR SFP Transceiver, Simplex LC, 80km over SMF

Regulatory and Standards Compliance

Standards

  • FC-PI 13.0 Compliance for 1.0625/2.125 Gbit/sec Operation
  • FC-PI-2 Compliance for 1.0625/2.125/4.25 Gbit/sec Operation
  • FC-PI-4 compliance for 8.5/4.25/2.125 Gbit/sec operation
  • FC-PI-5 Compliance for 14.025/8.5/4.25Gb/s Operation
  • FC-PI-6 Compliance for 28.05/14.025/8.5Gb/s Operation
  • FC-PI-6P Compliance for 112.2/56.1/34Gb/s Operation
  • SFF-8472: Common Management Interface
  • 802.3™-2012 IEEE Standard for Ethernet
  • GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
  • GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies
  • GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipmet
  • GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors
  • RoHS 6

Safety

Modules are compliant with Laser Class 1 as defined in IEC 60825-1, IEC 60825-2 and Comply with 21 CFR 1040.10 and 1040.11.

Laser Class

ProductLaser class
Q28-128GM-SW41
SFP28-32GSR-851
SFP28-32GLR-311
SFP-16GSR-851
SFP-16GLR-311
SFP-16GER-551
CWxx-16GSFP-401
DWCxx-16GSFP-401
SFP-10GSR-851
SFP-10GLR-311
SFP-10GER-311
SFP-10GER-551
SFP-10GZR-551
SFP-10G-BX1
CWDM-SFP10G-40L1
SFP4G-SW-851
SFP4G-LW-311
SFP4G-LW-311
SFP-2GSR-851
SFP-2GSR-311
SFP-2GIR-311
SFP-2GLR-311
SFP-2GLR-551
SFP-2GL2-551

Additional Information

For more information about Fiber Channel optics modules, contact your account manager or visit https://www.fs.com/c/fiber-optic-transceivers-9.

Document History

New or revised topicDescribed inDate
Fiber Channel Transceiver Modules Data SheetUpdated all10/14/2022
Fiber Channel Transceiver Modules Data SheetAdd Q28-128GM-SW4 module11/10/2022
Fiber Channel Transceiver Modules Data SheetAdd CWxx-16GSFP-40 module12/31/2022
Fiber Channel Transceiver Modules Data SheetAdd DWCxx-16GSFP-40 module2/15/2023

FS Offices

Shenzhen (China)

Address: Room 2702, Yisibo Software Building, Haitian 2nd Road, Yuehai Street, Nanshan District, Shenzhen, 518000, China

Tel: +86(755)8357 1351

Email: marketing@fs.com

Delaware (United States)

Address: 380 Centerpoint Blvd New Castle, DE 19720 United States

Tel: +1 (888) 468 7419

Email: us@fs.com

Munich (Germany)

Address: NOVA Gewerbepark Building 7, Am Gfild 7, 85375 Neufahrn bei Munich, Germany

Tel: +49 (0) 8165 80 90 517

Email: de@fs.com

Singapore

Address: 71 Robinson Rd, Singapore 068895

Tel: +65 64437951

Email: sg@fs.com

Wuhan (China)

Address: Optical Valley Software Park A6, 9th - 18th floor, Guanshan Ave, Hongshan District, Wuhan, Hubei Province, 430074, China

Tel: +86 (027) 8808 9195

Email: marketing@fs.com

Birmingham (United Kingdom)

Address: Part 7th Floor, 45 CHURCH STREET, Birmingham, B3 2RT

Tel: +44 (020) 3287 6810

Email: uk@fs.com

Melbourne (Australia)

Address: 57-59 Edison Rd, Dandenong South, VIC 3175, Australia

Tel: +61 3 9693 3488

Email: au@fs.com

Tokyo (Japan)

Address: THT Building,3-11-5 Ueno, Taito-ku, Tokyo JAPAN 110-0005

Tel: 03-5826-8305

Email: jp@fs.com

FS has several offices around the world. Addresses, phone numbers are listed on the FS Website at https://www.fs.com/contact_us.html.

FS and FS logo are trademarks or registered trademarks of FS in the U.S. and other countries.


File Info : application/pdf, 18 Pages, 907.55KB

PDF preview unavailable. Download the PDF instead.

20230215153155nvvlow

References

Related Documents

Preview FHD Fiber Cabling System Guide | FS.COM
A comprehensive guide to the FS.COM FHD Fiber Cabling System, detailing its components, applications, migration capabilities, and technical specifications for modern data center and enterprise network infrastructure.
Preview FS.COM 2023 Product Roadmap: Networking, Data Center, and Telecommunications Solutions
FS.COM presents its comprehensive 2023 product roadmap, showcasing advancements across data center switches, enterprise networking, transceivers, fiber optic cabling, copper systems, power solutions, wireless technology, and surveillance equipment. Stay informed about future product releases and availability.
Preview Types of 400G Transceivers: A Comprehensive Guide
An informative guide detailing the various types of 400G transceivers, their market trends, applications, form factors, and interface standards.
Preview FS S8050-20Q4C 40G IP Storage Switch Datasheet
Datasheet for the FS S8050-20Q4C, a high-performance Ethernet switch designed for next-generation Metro, Data Center, and Enterprise network requirements. Features include L2/L3 capabilities, comprehensive protocols, and flexible software options for rapid service deployment and management.
Preview FS-BOX-V4 Firmware Upgrade Tool Kit Quick Start Guide
Quick start guide for the FS-BOX-V4 Firmware Upgrade Tool Kit, detailing its features, supported transceivers, connection methods (APP/USB), hardware operations, and safety information. Compatible with FS Transceivers & DAC/AOC Cables.
Preview S3410C-16TF PicOS® Switch Hardware Guide
Comprehensive hardware guide for the FS.COM S3410C-16TF PicOS® Switch, detailing installation, configuration, and operational specifications. Learn about its Broadcom BCM56150 chip, 16x 1Gb RJ45 and 2x 1Gb SFP ports, MLAG, and AmpCon-Campus management platform.
Preview FS Visual Fault Locator FVFL-204 Quick Start Guide
Concise guide to the FS Visual Fault Locator FVFL-204, covering its introduction, functions, installation, operation, maintenance, warranty, and compliance information.
Preview Lossless Network for RDMA White Paper
This white paper explores the implementation of a lossless network for RDMA (Remote Direct Memory Access) using RoCEv2, detailing its principles, advantages, and configuration on FS switches and Broadcom/NVIDIA NICs. It covers hardware requirements, software setup, and performance testing to achieve high throughput and low latency for demanding applications like AI training and HPC.