User Manual for SHARE models including: 4500X Global GPS Systems, 4500X, Global GPS Systems, GPS Systems, Systems
GDU S400E - A Compact, Lightweight, and Portable Drone – InfinitDrones Corp.
File Info : application/pdf, 21 Pages, 2.46MB
DocumentDocumentSHARE 4500X Operation Manual V1.0 2023.12 SHAREUAV Ltd. Catalog 1 Camera ........................................................................................................................ 1 1.1 Product Overview .................................................................................................... 1 1.2 Parameters ............................................................................................................... 1 1.3 In the box ................................................................................................................. 2 2 Camera Module Overview .......................................................................................... 3 2.1 Camera Features ...................................................................................................... 3 2.2 Data Storage Module ............................................................................................... 4 2.3 Data Reading Module .............................................................................................. 4 2.4 Type-C Cable ............................................................................................................ 4 3 SHARE 4500X Aerial Survey Solution .......................................................................... 5 4 Camera Operation .......................................................................................................6 4.1 Installation ............................................................................................................... 6 4.2 Powering On .............................................................................................................6 4.3 Parameter Setting .................................................................................................... 8 4.3.1 Parameter Setting on DJI Pilot .............................................................................. 8 4.3.2 Custom Camera .....................................................................................................8 4.3.3 Camera Parameter Setting ....................................................................................9 4.3.4 Recommended Camera Parameter Setting ........................................................ 10 4.3.5 Setting Flight Parameters ....................................................................................11 4.3.6 Recommended Flight Parameters Settings .........................................................11 4.4 Real-time Data Window .........................................................................................12 4.5 Check Before Takeoff ............................................................................................. 13 4.6 Operation Monitoring ............................................................................................13 4.7 Video Recording .....................................................................................................14 4.7.1 Operation ............................................................................................................ 14 4.8 Gimbal Setting ........................................................................................................15 4.8.1 Adjust the Angle of Gimbal .................................................................................15 6 Data Copying and Delete .......................................................................................... 16 7 DJI Terra .....................................................................................................................18 7.1 New Mission ...........................................................................................................18 7.2 Import Photos ........................................................................................................ 18 7.3 Aerotriangulation ...................................................................................................18 7.4 Setting Parameters .................................................................................................19 1 Camera 1.1 Product Overview SHARE 4500X with gimbal is a high efficiency, high performance and multi-purpose aerial survey camera. By mounting 45M pixels sensor and standard professional full format mapping lens, improving the imaging quality and greatly improve the efficiency of aerial survey operations. The camera can be applied in various aerial survey scenarios, such as application of three-dimensional, two-dimensional, monomer modeling, urban high-rise buildings and other aerial survey scenes. It provides integrated, high-precision and high-efficiency aerial survey solutions for UAV aerial survey when cooperates with mainstream UAV on the market. 1.2 Parameters Overall Camera Name Size NW. IP rate Compatible Platform Working Temperature Storage Temperature Power Supply Interface Effective Pixels Sensor Size Image Resolution ISO Range Shutter Speed Storage Capacity SHARE 4500X 75.5*60*107.5 mm(without gimbal) 128.5*181.5*153.3 mm(with gimbal) 280 g (without gimbal) 640 g (with gimbal) IP53 M350 RTK, Other Multi-rotor and fixed-wing UAV -20 ~ 50 -20 ~ 60 External Power supply with DC 12-50V Gimbal interface & General interface 45Million pixels Sensor size36*24mm(Full format) Pixel size4.4m (3:2) 8192 x 5456 px AUTO50-200/50-400/50-640/50-800/50-1000/50-1600 Fixed ISO10020040064080010001600 1/1250,1/1000,1/800,1/640,1/500 512GB 1 Lens Video Gimbal Exposure Interval Parameter Adjustment Data Storage Operating Mode Image Transmission Focal length Aperture Size Shooting Distance Video Formats Video Size Stabilization Installation Method Mechanical Range 0.9s DJI Pilot Integrated Data Storage Module Flight Controller Trigger /Isometric Trigger / isochronous Trigger Dynamic bitstream HD image transmission Standard40mm Customizable56mm Fixed F5.6 20m MP4 [4K(3840×2160)], Frame Rate30fps 3-axis (Pitch Yaw Roll) Quick release gimbal interface Pitching: -130° to +40° Yawing: -320° to +320° Rolling: ±55° 1.3 In the box Name Camera Quantity 1pc Skyport Cover 1pc Shipping Box 1pc Name Warranty Card User Manual Lens Cover Quantity 1pc 1pc 1pc Data Storage Module 1pc Wipe Cloth 2pcs Data Reading Module 1pc Data Cable 1pc 2 2 Camera Module Overview 2.1 Camera Features Pic 1 Camera Interface Three-axis stable gimbal can ensure the stability of camera , and take pictures from multiple directions. Full format camera, high pixels, high photo quality SHARE HD color screen can display real-time camera status which includes environmental information, number of photos, shutter speed, shutter times Support DJI Terra, achieving GCP free with high precision Standard configured with SHARE own designed software SHARE Data Manager, it can realize to upgrade the firmware online, and flight management. Real-time image transmission display, the data can display on the ground station synchronousl 12-50V wide voltage can be compliant to more drones The gimbal can be disassembled, and the camera can be used separately to be compatible with a variety of flight controllers It can automatically identify UAV signals and support serial port communication and deep adaptation development; Professional mapping level lens, much closer focus distance, can realize fining modeling 3 2.2 Data Storage Module Pic2 Data Storage Module Storage512GB UsageStore camera distortion parameters and basic information, and store photos and POS data during operation. Installation:Insert the camera with the " " icon facing rear. A " dah "sound indicates that the installation is finished. Remove the storage moduleGently pull outward from the icon end to remove be careful to move slowly and parallel. Note 1. The data storage module must be inserted before turning on the camera so that the camera can be started normally. 2. Insert the camera with the " " icon facing rear 2.3 Data Reading Module Pic3 Data Reading Module The data storage module is used to read and copy the data which is taken by the camera. When in use, remove the data storage module from the camera , connect the data reading module, and then connect the computer for data copying by Type-C cable. 2.4 Type-C Cable Pic 4 Type-C Cable The USB 3.1 high-speed Type-C data cable is used to connect the data storage module and the computer for data copy. 4 3 SHARE 4500X Aerial Survey Solution The camera is equipped with 3-axis stabilized gimbal, the SHARE 4500X camera parameters are adjustable ,and the operation is convenient M350 RTK is the latest flagship flight platform of DJI industry M350 RTK application, and the Pilot APP of the remote control can execute the mapping mission automatically Integrates data copy, flight management, shutter inquiring, camera setting, firmware upgrade, SHARE Data Manager reading field photos and POS data, and other operations in just one software. Deeply adapts to DJI Terra, Context Capture and other modeling software. DJI Terra DJI self-developed high efficiency, low cost, high precision modeling software 5 4 Camera Operation 4.1 Installation Take out the camera, turn the camera downwards vertically, hold the upper arm of the gimbal with your left hand, and place it flat to the gimbal interface of UAV. The white point of DJI Skyport adapter ring should be aligned with the red point of the UAV. Hold DJI Skyport adapter ring in your right hand and rotate counterclockwise ninety degrees until the red point of the adapter ring is aligned with the red point of the gimbal interface. Pic 5 Camera Interface 4.2 Powering On Turn on the power of the drone, the camera shows that it is starting up, and the three-axis gimbal completes self-check and calibration. After the self-check is completed, the direction of the camera lens is consistent with the direction of the drone nose; The SHARE color screen display interface is shown in the figure below. 0 ... 0 Pic 6 Camera Display Screen 6 Color Display Meaning UAV model Remark Display the UAV model when using Skyport ON/OFF status Display when power off Camera Firmware Version The current number of received shooting commands Actual shooting numbers of the camera Current camera firmware version The trigger commands that camera has received Actual shooting numbers of the camera , zero after power off Camera temperature 30blue50yellow50red RTK status RTK has 3 display modes Red-- -No solution Yellow -Single point solution/ Floating point solution Green -Fixed solution Camera humidity 0.5 blue0.9 yellow0.9 red Bluetooth status Shutter Storage capability Shutter life Shutter speed ISO ISO setting WB Color White balance Color mode Green color when connect Display the used storage Display the used shutter times 5 options : 1/500;1/640;1/800;1/1000;1/1250 6 options: 50-20050-40050-64050-80050-1000 50-1600 Auto, Sunny day, Cloudy day Standard, Vivid 7 4.3 Parameter Setting 4.3.1 Parameter Setting on DJI Pilot Take working with DJI M350 RTK for example,using DJI Pilot for route planning and set flight parameters. Open DJI Pilot Select Flight Route Select Ortho CollectionCreate a route (Or KMZ Import , Import the route planned by the third-party software)Select Area Route Select Aircraft ModelSelect Camera Model Pic 7 DJI Pilot 4.3.2 Custom Camera To connect camera with DJI M350 RTK for the first time, users need to create a new camera in Custom Camera interface of DJI Pilot,then input camera parameters and save it. Then select the edited camera. SHARE 4500X Photo resolution (W) Sensor size (W) Focal length 8192 px 36mm 40.0 mm Photo resolution (H) Sensor size (H) Minimum interval 5456 px 24 mm 1.0s 8 Pic 8 Custom Camera 4.3.3 Camera Parameter Setting Click the three dots in the upper right corner of the DJI Pilot screen and select "Payload Settings" to set following items: Pic 9 Payload Setting 9 Item Display Real-time Data ON/OFF Video Mode One Key Back Shutter White Balance Color Mode ISO Burst Mode Gimbal Pitching Angle Photo Interval/Distance Start Fixed ISO Fixed ISO Functions Real-time data window hide/show default: hide Control camera on/off Control the camera to turn on the video mode Click to restore gimbal to -90° vertically. Change shutter speed (1/500,1/640,1/800,1/1000,1/1250 5 options) Set White balance (Auto, Sunny day, Cloudy day 3 options) Set Color mode (Standard and Vivid 2 options) Set the ISO rangeAuto 50-200/50-400/50-640/50-800/50-1000/50-1600 6 options) Set trigger mode ( Flight Controller, isometric trigger and isochronous trigger 3 options) Adjust the gimbal angle from -120° to 45°. Define the down-view lens vertically downward as -90 degrees, and horizontally forward as 0 degrees Set the interval for isochronous shooting /set distance for isometric shooting After opening, the camera will start the fixed ISO mode Enter the fixed value, camera will take photos with the fixed ISO value 4.3.4 Recommended Camera Parameter Setting White Balance Color Mode Shutter Speed ISO The sunny day is recommended for sunny day or scorching sun. Set cloudy day when the light environment is weak. VividColors are bright StandardStandard Color In sunny day or strong light1/1250-1/1000 In weak light1/800-1/640 (reduce the flight speed accordingly) Scorching Sun50-200Sunny50-400Cloudy50-800Weak Light 50-1600 10 4.3.5 Setting Flight Parameters Set flight altitude, flight speed, upon completion in basic setting interface. Set overlap ratio,course angle,margin in the advance settings interface. Pic 14 Setting Flight Parameters Interface 4.3.6 Recommended Flight Parameters Settings Flight Altitude Flight height is determined by project requirements and height of the terrain and buildings in the survey area( At least 20meters taller than the tallest building in the survey area. The lower altitude, the higher resolution. Overlap Ratio Recommending to set frontal overlap ratio as 80% and side overlap ratio as 70%, which are suitable for most scenarios. When the height difference of the survey area is large, it suggesting to increase overlap ratio to ensure that overlap ratio at the height of the survey area meets the modeling requirements. Margin The oblique photography need to set margin at least one flight altitude to ensure that overlap ratio of photos taken at the edge of the survey area meets the requirements of modeling; otherwise, the modeling effect will be affected. Ortho photography need to set margin at least half flight altitude . Timed /Distance interval shot Photo Mode Recommending to use Distance interval shot , which is better than Timed Interval shot. 11 4.4 Real-time Data Window Item Photo Mode 28 RTK Photographing Instruction Down Shutter Color Mode WB ISO Camera Firmware Functions Display camera work mode(Photo Mode/No Photo/Video Mode 3 options) Display camera operating temperature Display RTK status during flight(Fixed Solution/Float Solution/Single Point/No Solution 4 options) Display the number of photo instructions given by the aircraft to the camera Display the actual number of the down-view lens take Displays shutter speed(1/500,1/640,1/800,1/1000,1/1250 5 options) Display color mode(Standard / Vivid 2 options) Display white balance(Auto/Sunny day/Cloudy day 3 options) Display ISO range(Auto 50-200/50-400/50-640/50-800/50-1000/50-1600 6 options) Display the current firmware version of the camera Precaution During the camera start up process, "Display Real-time Data" window of the DJI Pilot screen shows the photo-unavailable status, and displays "Photo Mode" after normal booting. When operating without ground control point, the drone must use RTK to make the POS accuracy be obtained by the camera to meet the requirements. To open the network RTK on the DJI Pilot before the operation, you can use the network RTK or customized RTK. If the RTK connection is successful, the real-time data window would show the Fixed Solution, indicating that the RTK link communication between the camera and the drone is successful, then the camera can record the location information normally. 12 4.5 Check Before Takeoff Take five photos manually before takeoff, and check whether the number of shots from the camera display and the real-time data window of the ground station is consistent. Take working with DJI M350 RTK for example, camera is on, the window shows the real-time image. User can press the `photo' button on controller to test the photo function. Check whether the RTK state of the camera's real-time data window is "Fixed Solution", and restart the drone if it is a non-solution state. 4.6 Operation Monitoring In the process of flight operation, the environment of shooting area and the working state of aircraft and camera can be monitored in real-time through the FPV diagram transmission of aircraft and down-view image transmission of the camera. The number of photographing instructions of the flight control, the number of photographing from camera and RTK status can be displayed in real-time through DJI Pilot. After flight finished, user need to check if camera display and the camera information window of DJI Pilot interface have the same number of photos. 13 4.7 Video Recording 4.7.1 Operation Turn on the video mode through the video mode button in the payload setting interface of DJI Pilot, and click it again to turn off Turn on the video mode through the remote control video button (key 2 in the picture), click again to turn off the video The user can judge whether the camera is in the photo mode or the video mode through the real-time display window. The top of the interface displays the remaining recording time. 14 Precaution It should be noted that the camera may fail to switch from photographing to recording mode if the camera is switched too fast. It is recommended that users wait for 1-2 minutes after finishing photographing. Video are stored as .MP4file format , stored in: 4.8 Gimbal Setting 4.8.1 Adjust the Angle of Gimbal SHARE 4500X camera is equipped with a three-axis stabilized gimbal. Pitching: -130° to +40° Yawing: -320° to +320° Rolling: ±55° Adjust the Angle of gimbal by remote controller -Left wheel to adjust the pitching angle -Right wheel to adjust the yawing angle The icons on the left side of the flight interface are, from top to bottom, returns the gimbal to the center, vertically downwards the gimbal, returns the yawing angle of the gimbal to the center, vertically downwards the pitching angle of the gimbal The direction of the arrow in the circular keyboard button on the right side of the flight interface is the adjustment direction of the gimbal 15 6 Data Copying and Delete Camera uses a pluggable data storage module to store data. The photos and POS information ,which are collected by the camera ,are stored in the data storage module. When reading data, users only need to plug the storage module into the reading data module and connected to the computer USB3.0 through the Type-C cable to view and copy the data. Connecting to the computer will display "Down " and "GPS "drive letter. Pic 12 Data Copying (1) Open the SHARE Data Manager software, select the corresponding camera and drone model, and enter the flight-copy interface; Pic13 Flight Management Interface (2) Select the needed flight and check the details to ensure that the photos match the POS correctly; 16 Pic 14 Copy Setting Interface (3) Select a copy path, modify the copy settings as required, and click copy. It is recommended to copy the data to computer local drive letter; (4) After the copy is completed, click view data to check whether the data is normal. (5) Delete the data: select the flights which need to be deleted, click clear flights, and wait for completed clearing ; or select initialize camera (6) Click disconnect, the drive letter pops up to disconnect the data line. Precaution (1) Please delete the drive letter file by using SHARE Data Manager. The drive letter file cannot be deleted arbitrarily (2) The data cannot be restored after being deleted or initialized, please operate carefully. Before performing this operation, ensure that data is correctly backed up on the computer. (3) Before powering on the camera, insert the storage module into the camera; otherwise, the camera will fail to start. (4)After using SHARE Data Manager to complete the copy,click the disconnect button to Automatically popup each drive letter.Do not unplug the storage module directly, otherwise It is easy to reduce the life. 17 7 DJI Terra 7.1 New Mission Open DJI Terra-Choose visible light-Enter mission name 7.2 Import Photos Import the folder of valid photos copied by SHARE Data Manager 7.3 Aerotriangulation Select the 2D model/3D model according to the task needs, and then click Aerotriangulation - Advanced -GCP Management - Aerotriangulation. If the accuracy of the puncture point is required, click the GCP to stab the point after the end of Aerotriangulation and optimization. 18 7.4 Setting Parameters (1) Select the corresponding resolution, scene mode, and calculation method according to actual needs (2)Select the coordinate system which is required by the model (if there is a image control point, enter the "GCP Management" interface and perform Aerotriangulation first ) (3)If it is a surround flight, 3D modeling can be performed, and the settings are similar to the above settings, and the model format is mostly OSGB and OBJ format (4)Click Start Reconstruction 19