LevelOne USB Network Adapter Quick Installation Guide
Package Contents
The package includes: Quick Installation Guide, EU Declaration of Conformity, Resource CD.
Product Overview
This guide provides instructions for installing the LevelOne USB Network Adapter on Windows operating systems. The adapter connects to the internet via an RJ45 network cable and to the computer via a USB port.
Diagram Description: A diagram illustrates the connection setup. It shows an internet source connected to a LevelOne Network Card via an RJ45 Network Cable. The Network Card is then connected to a computer via a USB port.
Installation Instructions (English)
Follow these steps for installation on Windows Operating Systems:
- Insert the Configuration Utility CD-ROM into the computer's CD-ROM drive. The program should run automatically. If it does not, manually run the
autorun.exe
file from the CD by double-clicking it. - Click the “Utility” button to proceed. (Refer to Figure 1 for the CD menu interface).
- Click the “OK” button to continue. (Refer to Figure 2 for the language selection screen).
- Click the “Finish” button to exit the installation. (Refer to Figure 3 for the completion screen).
Other Languages
This guide also provides installation instructions in Deutsch, Français, Español, Italiano, and Português.
Figures Description
Figure 1: Shows the main menu of the LevelOne Network Card utility CD. Options include "Quick Installation Guide", "EU Declaration of Conformity", "Install Adobe Reader", "Driver", "Utility", "Explore the CD", and "Exit".
Figure 2: Displays the InstallShield Wizard for AX88179_AX88178A Windows Drivers. It prompts the user to "Select the language for the installation from the choices below." An example shows "English (United States)" selected with "OK" and "Cancel" buttons.
Figure 3: Shows the InstallShield Wizard completion screen. It states "Setup has finished installing AX88179_AX881784 Windows Drivers on your computer." It includes "Back", "Finish", and "Cancel" buttons.