Security IP Cameras | CCTV, Access Control, Parking System | IoT Solutions Supplier - UMOVAL
User Manual for UMOVAL models including: UM-X6, Smart Hidden Camera, UM-X6 Smart Hidden Camera, Hidden Camera, Camera, UM-A9, UM-X6-BLACK, UM-T8, UM-X6-WHITE, UM-K8, UM-X7, UM-X9, UM-X8, UM-X10
UM-X6 Smart Hidden Cameras by UMOVAL IoT
UMOVAL IoT Technology Co., Ltd UM-X6 2A7FTUM-X6 2A7FTUMX6 um x6
File Info : application/pdf, 8 Pages, 1.04MB
DocumentDocumentSmart Hidden Cameras
User's Manua
Thanks for purchasing UMOVAL hidden spy cameras! The User's Manual is made for the Model Numbers above. Please follow the instructions to set up your camera step by step.
-1 -
4. Motion Detection Technology
The alarm message will be sent to your smart mobile phone once a movable human beings is detected.
5. Infrared Night Vision
The camera is built in with 6 pieces of infrared LEDs. Help to see clearly even in the dark for live viewing and video surveillance.
6. Only One-way Audio
Two-way audio is not supported on the device. But you can hear the voice at the scene by press the button of Audio.
7. About the Video Resolution
The camera is a very small hidden one and the video resolution is only up to 720x480P or 640x480P. We don't exaggerate the data in order to keep honest. Hopefully it can meet your normal requirements for video surveillance at such a price.
VI. Customer Supports
UMOVAL is a honest company and we will sincerely do customer supports for all of customers if there are any quality issues during the usages of the camera within the limited warranty period in 12 months since your order date. Our customer support email address is as below: service@umoval.com
Supplied by UMOVAL loT Technology Co., Ltd
https://www.umoval.com/
-6-
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Thanks!
Model No.:
UM-X6 UM-X6-BLACK U MX- 6-WHITE U MX- 7 U MX- 8
U MA- 9 UM-T8 UM-K8 UM-X9 UM-X10
- 6 -
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.