Instruction Manual for HOTSPOT models including: FHS2-UNV-36L Emergency LED Driver, FHS2-UNV-36L, Emergency LED Driver, LED Driver
File Info : application/pdf, 14 Pages, 977.77KB
DocumentDocumentFHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 · Emergency LED Driver · Universal Voltage: 100-277VAC, 50/60Hz · Output Wattage: 1.2-20W · Output Current range of 100mA - 700mA · Output voltage range of 12-55VDC This Driver Will Operate The Following LED Modules: Any LED module designed to accept an input voltage range of 12-55VDC and can operate up to a current of 700mA. General Specifications Input Voltage Input Current Input Power Red Lead White/Black Lead Standby Input Power Driver Type Output Current Output Voltage Range Output Power Number of Output Channels RFI/EMI Output Type Battery Type Battery Capacity Available Battery Recharge Time Battery Discharge Time Test Switch Remote Mounting Distance Ambient Operating Temperature Range Input Surge Protection Protections Service Life Approvals / Class 100-277VAC, 50/60Hz 0.1A Max. 6W Max. 3A,60V Max. 1A Max. <0.8W Constant Current 100mA -700mA Initial (Refer to accesory chart) 12-55VDC 20W Max 1 Channel FCC Part 15 Class A LED Class 2 NiCd 9.6VDC or LiFePO4 9.6VDC 900mAh, 1000mAh, 1200mAh, 1500mAh, 1800mAh, 3000mAh, 4000mAh, 6000mAh 24-32 Hours (Refer To Battery chart) 90 Minutes Min. 20' (6m) Max NiCd: 0°C to 50°C (32°F to 122°F), LiFePO4: 10°C to 50°C (50°F to 122°F) FHSBATCC3-3: -20°C to 50°C (-4°F to 122°F) FHS2-UNV-36L: -20°C to 50°C (-4°F to 122°F) 2.5KV Ring Wave Battery Over Discharge Protection Output Short Circuit Protection 50,000 hours RoHS , cURus 1310 , cURus 924 , CEC Title 20, Dry and Damp Locations, CE, EN61347-2-7:2012 EN61347-1:2015, EN55015:2013 +A1:2005, EN61000-3-2:2014, EN61000-3-3:2013, EN61547:2009 Mechanical Data BLACK 1.17"(29.6mm) WHITE 12.01"(305±25.4mm) WHITE/BLACK 0.17"( 4.2mm) 6.3"(160±10mm) 5.12"(130±10mm) 5.02"(127.4mm) 5.34"135.7mm) 4.69"(119mm) 18.11"(460±25.4mm) 4.72"(120±10mm) RED 24"(610±25.4mm) 0.93"(23.7mm) 1.69"(42.8mm) Case Tolerance=±0.02" Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 1 of 14 2017-728-1 Rev D FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 Important and Safety Instructions When using electrical equipment and this lighting device basic safety precaution should be followed at all times including but not limited to the following: PLEASE READ CAREFULLY AND FOLLOW ALL INSTRUCTIONS FOR YOUR OWN SAFETY ·IMPORTANT: Do not connect battery until fixture is installed. ·IMPORTANT: An un-switched AC power source of 100VAC to 277VAC is required. ·This device is designed for use in fixtures listed for dry and damp locations. ·CAUTION: Make sure all electrical connections conform to the National Electrical Code and all applicable local regulations. ·CAUTION: Do not let power supply cords touch hot surfaces. ·CAUTION: Do not mount near gas or electric heaters. ·CAUTION: Battery is rechargeable Ni-Cd or LiFePO4 type and must be recycled or disposed of properly. Do not use this emergency driver with accessory equipment other than recommended by manufacturer; failure to follow this may cause an unsafe condition. Servicing should only be performed by qualified service personnel. Do not use this emergency driver for other than intended use. Not suitable for high-risk task area lighting. Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel. IMPORTANT: The output EM power will not exceed the max power rating of the battery. IMPORTANT: Indicator (LED light) illuminated indicates battery in charge mode when AC power is applied. It is recommended and required by applicable code to test emergency ballast to ensure proper function of the system; push the test switch for thirty (30) seconds every thirty (30) days to ensure the emergency driver is functioning by illuminating the light source. Conduct a ninety (90) minutes discharge test one (1) time per year; LED light source should be illuminated for a minimum of ninety (90) minutes . ASSEMBLY and FIELD INSTALLATION WIRING: WARNING: AC power must be off before proceeding with assembly or installation of emergency driver. TESTING SYSTEM: The emergency battery requires a charge minimum of one (1) hour before testing the circuit. A full charge requires twenty four (24) or thirty two (32) hours, depending upon battery pack. Please refer to battery chart for charging time. IMPORTANT: In order to maintain proper operation and warranty coverage, the battery must be recharged once per year prior to installation. Fulham Head Quarters: Fulham Co., Inc 12705 South Van Ness Ave. Manufacturer: North China Fulham Electronic Co. Ltd. No. 9 Xingchang Road, Nanshao Zhen Changping Science Park, Beijing, P.R. China SAVE THESE INSTRUCTIONS Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 2 of 14 2017-728-2 Rev D Wiring Diagrams 1 FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 LEFT VIEW BLK/WHT TO LED DRIVER (100W MAX.) BLK WHT INPUT POWER NOTE: DRILL ½" DIA. HOLE IN MOUNTING PLATE TO INSERT TEST SWITCH TO LED (+) INPUT RIGHT VIEW RED TEST SWITCH 700mA Max. harness BATTERY LED ARRAY BY CUSTOMER Wiring Diagram (TYP) LINE HOT( 100V ~ 277V) WHITE WHITE(COMMON) BLACK WHT/BLK FHS2-UNV-36L BATTERY RED (+) WALL SWITCH BLACK LED DRIVER RED (+) BLUE (-) BALLAST MUST BE GROUNDED LED ARRAY BLK RED WIRING DIAGRAM (EMERGENCY ONLY) HOT( 100V ~ 277V) WHITE(COMMON) BLACK WHT/BLK FHS2-UNV-36L BATTERY RED (+) LED ARRAY BLK RED Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 3 of 14 2017-728-3 Rev D Battery Chart FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 Fulham Model No. FHSBATT8-AA.9 FHSBATL3-1 FHSBATL6-.6 FHSBATL3-1.5 FHSBATL3-1.5S FHSBATL9-.6 FHSBATCC3-3 FHSBATT8-C3 FHSBATT8-C3L* FHSBATL3-3 FHSBATL6-1.5 FHSBATL6-1.5L* FHSBATL6-1.5S FHSABATT8-D4 FHSBATL6-3 FHSBATL6-3L* Chemistry Compliant NiCd LiFePO4 LiFePO4 LiFePO4 LiFePO4 LiFePO4 LiFePO4 NiCd NiCd LiFePO4 LiFePO4 LiFePO4 LiFePO4 NiCd LiFePO4 LiFePO4 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Pack Max Load for Capacity 90 min. 900mAh 4W 1000mAh 4W 1200mAh 6W 1500mAh 8W 1500mAh 8W 1800mAh 10W 3000mAh 14W/10W** 3000mAh 16W 3000mAh 16W 3000mAh 16W 3000mAh 16W 3000mAh 16W 3000mAh 16W 4000mAh 20W 6000mAh 20W/16W** 6000mAh 20W/16W** Battery Voltage 9.6V Battery Count 8 Cells 3 Cells 6 Cells 3 Cells 3 Cells 9 Cells 3 Cells 8 Cells 8 Cells 3 Cells 6 Cells 6 Cells 6 Cells 8 Cells 6 Cells 6 Cells Recharge Time Dimensions (L x W x H) 12" Harness Mounting Accessory (Optional) (Included / Optional) 24Hrs 5.23" x 2.5" x 0.7" 24Hrs 3.48" x 2.35" x 0.99" 24Hrs 5.23" x 1.87" x 0.85" 24Hrs 24Hrs 3.48 "x 2.76" x 0.99" 8.87" x 1.11" x 0.955" Bracket Included 24Hrs 7.52" x 1.87" x 0.85" 24Hrs 6" x 3.6" x 1.55" 24Hrs 24Hrs 4.15" x 3.29" x 2.11" FHS-EXTM 7.89" x 2.17" x 1.04" FHSBATSC8-C3L 24Hrs 24Hrs 4.39" x 2.82" x 1.3" 5.7" x 2.76" x 0.99" Bracket Included 24Hrs 7.89" x 1.56" x 0.92" FHSBATSC6-1.5L 24Hrs 16.67" x 1.11" x 0.955" 24Hrs 4.89" x 3.84" x 2.72" Bracket Included 32Hrs 7.52" x 2.82" x 1.3" 32Hrs 7.94" x 2.17" x 1.21" FHSBATSC6-3L CAUTION: Replace battery only with corresponding part number. *Note: These batteries do not include mounting means, separate mounting brackets are available. **Note: This battery rating applies for Canada use only. Part Number FHS-HARNESS-100 FHS-HARNESS-150 FHS-HARNESS-200 FHS-HARNESS-250 FHS-HARNESS-350 FHS-HARNESS-450 FHS-HARNESS-550 FHS-HARNESS-650 Accessory Harness (Wire length 24") Des cription Part Number 100 m A LED Harnes s FHS-HARNESS-125 150 m A LED Harnes s FHS-HARNESS-175 200 m A LED Harnes s FHS-HARNESS-225 250 m A LED Harnes s FHS-HARNESS-300 350 m A LED Harnes s FHS-HARNESS-400 450 m A LED Harnes s FHS-HARNESS-500 550 m A LED Harnes s FHS-HARNESS-600 650 m A LED Harnes s FHS-HARNESS-700 Des cription 125 m A LED Harnes s 175 m A LED Harnes s 225 m A LED Harnes s 300 m A LED Harnes s 400 m A LED Harnes s 500 m A LED Harnes s 600 m A LED Harnes s 700 m A LED Harnes s Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 4 of 14 2017-728-4 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATT8-AA.9 4W, 900mAh, 9.6V FHSBATL3-1 4W, 1000mAh, 9.6V Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 5 of 14 2017-728-5 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATL6-.6 6W, 1200mAh, 9.6V FHSBATL3-1.5 8W, 1500mAh, 9.6V Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 6 of 14 2017-728-6 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATL3-1.5S 8W, 1500mAh, 9.6V FHSBATL9-.6 10W, 1800mAh, 9.6V Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 7 of 14 2017-728-7 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATCC3-3 14W/10W, 3000mAh, 9.6V FHSBATT8-C3 16W, 3000mAh, 9.6V Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 8 of 14 2017-728-8 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATT8-C3L 16W, 3000mAh, 9.6V Mounting Bracket Dimensions (Optional) FHSBATSC8-C3L Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 9 of 14 2017-728-9 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATL3-3 16W, 3000mAh, 9.6V FHSBATL6-1.5 16W, 3000mAh, 9.6V Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 10 of 14 2017-728-10 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATL6-1.5L 16W, 3000mAh, 9.6V Mounting Bracket Dimensions (Optional) FHSBATSC6-1.5L Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 11 of 14 2017-728-11 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATL6-1.5S 16W, 3000mAh, 9.6V FHSBATT8-D4 20W, 4000mAh, 9.6V FHSBATL6-3 20W/16W, 6000mAh, 9.6V Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 12 of 14 2017-728-12 Rev D Battery Dimensions FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 FHSBATL6-3L 20W/16W 6000mAh, 9.6V Do not apply pressure, contains critical components at this location. Mounting Bracket Dimensions (Optional) FHSBATSC6-3L Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 13 of 14 2017-728-13 Rev D FHS2-UNV-36L INSTALLATION INSTRUCTIONS MECHANICAL DATA NiCd/LiFePO4 E313578 TEST SWITCH INDICATOR STATUS: Indicators Type Bi-Color Indicator Single Color Indicator Bi-Color Indicator Single Color Indicator Bi-Color Indicator Single Color Indicator Bi-Color Indicator Single Color Indicator Bi-Color Indicator Single Color Indicator Bi-Color Indicator Single Color Indicator Bi-Color Indicator Single Color Indicator LED Indicators Status EM Driver Status/Mode Solid Green Solid RED ON System OK/AC OK (Self-diagnostic Enabled or Disabled). Flashing Green, 0.1s on/3s off Flashing RED, 0.1s on/3s off System OK / EM Mode Slow Flashing Red, 4s on/1s off Slow Flashing Red, 4s on/1s off Battery not detected, check battery switch or connection. Flashing Red, 1s on/1s off Flashing Red, 1s on/1s off Replace battery. Flashing Green, 2s on/2s off Flashing Red, 2s on/2s off Self-Diagnostic test underway. Fast Flashing Red, 0.1s on/0.1s off Fast Flashing Red, 0.1s on/0.1s off Abnormal driver performance, replace driver. Very Very Slow Slow Flashing Flashing Red, Red, 1s 1s on/7s on/7s off off Over temperature. Bi-Color Indicator Very Slow Flashing Red, 4s on/4s off LED output load is Short/Over Current/Over Voltage/Open Single Color Indicator Very Slow Flashing Red, 4s on/4s off Circuit in EM Mode. TEST SWITCH OPERATIONS: 1. EM Test: Press and hold test button (>1s)to enter EM mode for testing in normal AC powered . 2. Manual Self-Diagnostic: After charging twelve (12) hours or battery fully charged, quickly press the test button three times within two seconds to force the controller to enter a Self-Diagnostic cycle. To quit the self-diagnostic cycle after engaged press and hold the test button for ten seconds. 3. Enable/Disable Auto Self-Diagnostic: Press and hold the test button for one second, then release and quickly press the test button two times, then release and press and hold the test button for two seconds. When properly executed the indicator on the test button will display the appropriate color for the Enable/Disable status. A flashing of 2.5s ON/0.5s OFF means "Enabled", while a flashing of 0.5s ON/2.5s off means "Disabled". Once Enable/Disable is set the status color on the test button will remain the same throughout normal operation (refer to Indicator Status Table). 4. Enable/Disable Self-Diagnostic Status: Fast click 2 times within 2s to query the Self-Diagnostic Enabled/Disabled status. The indicator would blink for current status for 3 cycles. 2.5s ON/0.5s OFF stands for Enabled. 0.5s ON/2.5s OFF stands for Disabled. 5. Exit Output Short Circuit/No Load/Over Voltage Protection: When the test button flashes red for 4s on/4s off, press and hold the test switch for 10 seconds. 6. Turn off EM output: Press and hold the test switch for 10 seconds during EM output condition to turn off EM output. This is useful for production environment to turn off the EM output once a luminaire has completed functionality testing. This applies to products with Serial Number starting with Date code: S12016 or higher. Programming: Unless otherwise programmed the output will self-program to the rated output of the harness. This driver can be programmed using Fulham SmartSet TPSB-100 or TPSM-100E. Programming features include the following: Enable/Disable Self-Diagnostic Output EM Current : 0mA,100-700mA * When programmed to 0mA; output current defaults to rating of output harness(Refer to accessory harness chart). Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without notice. Page 14 of 14 2017-728-14 Rev D