Product Details
Reference: 404110
EAN13: 8424450179741
Description: A 3-input mixer for different terrestrial bands. Features an orange casing for outdoor mast installation. Allows current passage from the output to one of the UHF inputs to power a mast amplifier or a BOSS system.
Physical Data
Color: Laranja (Orange)
Packaging
- Box: 1 unit
- Cardboard Box: 10 units
Dimensions & Weight
- Net Weight: 198.00 g
- Gross Weight: 198.00 g
- Width: 88.00 mm
- Height: 76.00 mm
- Depth: 42.00 mm
- Product Weight: 197.00 g
Key Features
- EasyF System: Easy, fast, and very secure connection.
- Chassis: High shielding chassis, made of Zamak.
- DC Pass-through: Allows DC current passage.
- Casing: High-resistance ABS plastic casing for outdoor installation.
EasyF Connection System: Simplicity and Savings
The EasyF system is an innovative connection concept for the central conductor (live wire) of coaxial cable, offering direct connection to the device for increased reliability. By eliminating "F" connectors, it reduces chassis size and allows two coaxial cables to be connected in the same compartment.
Benefits of EasyF:
- Time Saving: Significantly reduces installation time by eliminating the need for connector application.
- Space Saving: Avoids the connector tightening process, which can be cumbersome in tight spaces.
- Connection Reliability: A clamp secures the cables, preventing them from coming loose.
- Economical: Does not require additional "F" or "CEI" connectors.
- Space Optimization: Inputs and outputs are located on the same side, preventing coaxial cable kinking and facilitating work within cabinets and boxes.
Simple 3-Step Mounting:
- Open the clamp.
- Insert the stripped coaxial cables.
- Close and tighten the clamp to secure the connection.
Further Information on EasyF Reliability
With EasyF, coaxial cable connection is achieved through an automatic system for inserting the live conductor (center conductor) via contact, without the need for soldering.
- Durability: Increases device lifespan by eliminating solder joints that can deteriorate over time.
- Reduced Failure Rate: Minimizes failures typically caused by cold solder joints.
- Electromagnetic Behavior: Optimized performance at high frequencies.
- Environmental Commitment: Eliminates contamination from soldering processes and reduces electrical consumption during manufacturing.
Technical Specifications: Ref. 404110
| Specifications | Type "EasyF" | VHF | UHF 1 | UHF 2 |
|---|---|---|---|---|
| Connectors | 3 Inputs, 1 Output | |||
| Frequency Range (MHz) | 47 - 254 | 470 - 790 | 470 - 790 | |
| Attenuation IN (VHF) -> OUT (dB) | 1.5 | |||
| Attenuation IN (UHF) -> OUT (dB) | > 40 | > 40 | ||
| Return Loss (dB) | > 40 | 5.5 | 5.5 | |
| Working Temperature (°C) | -5 ... 45 | |||
| Protection Index (IP) | 23 |
Application Example
The mixer is designed for typical terrestrial TV signal distribution setups. It connects to VHF and UHF antennas, combining their signals. The device can also supply power to external amplifiers via its output, ensuring optimal signal reception. The system is suitable for outdoor mast installations.
Diagram Description:
The diagram shows a mast with three antennas: one VHF and two UHF (UHF 1, UHF 2). Cables from these antennas feed into the Televes 404110 signal mixer. The mixer's output combines these signals. A power supply unit (PSU 24V) is connected to the mixer, providing power for amplification systems, indicated by the combined signal output labeled "UHF2+UHF1+BIII".
