Digital Services, Technology and Consulting | Reply
Instruction Manual for TRUE FINE models including: TD130007OT, TD130008OT, TD130007OT Outdoor Wall Sconce, Outdoor Wall Sconce, Wall Sconce, Sconce
TRUE FINE TD130007OT 719349305560 0719349305560 1008973292
File Info : application/pdf, 2 Pages, 431.55KB
DocumentDocumentOutdoor Wall Sconce Instruction Manual HARDWARE CONTENTS(shown actual size) ABA BBB CBC DBD Print in china PACKAGE CONTENTS PART A Fixture DESCRIPTION A QUANTITY 1 Long monting x 2 screw Wire nut x 3 Long monting x 2 screw Mounting plate (Not actual size) x 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING · TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS. PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder. Customer Service: service@24h-reply.com ASSEMBLY INSTRUCTIONS 1. Attach the mounting plate (DD) to the 1 outlet box (not included) with the long mounting screws (CC). Hardware Used CC Long mounting screw x 2 DD Mounting plate x 1 2. Strip 3/4 in. of insulation from wire ends. 2 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box. DD CC ASSEMBLY INSTRUCTIONS 4. Align the 2 screws(AA) through the holes 4 of the back plate, and fix them with screw DD nuts Hardware Used A AA Long mounting screw x 2 DD Mounting plate x 1 AA 5. Install light bulb (not included). Use one 5 E26 bulb. Print in china 3. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires together. Hardware Used BB Wire nut x3 BB CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.