User Manual for HEB Lighting models including: RT1, RT6, RT8, Touch Wheel RF Remote Controller
To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch ...
Page 1 Mechanical Structures and Installations Operation When turn on light, the indicator display blue. when turn off light, the indicator display red.
Touch Wheel RF Remote Controller Model No.: RT1/RT6/RT8 1,4 ,8 zone dimming/Touch color wheel/Wireless remote 30m distance/AAAx2 battery RT1 1 Zone Dimming RT6 4 Zone Dimming Features Apply to single color LED controller. Ultra sensitive color adjustment touch wheel. Each remote can match one or more receiver. AAAx2 battery powered. Operate with LED indicator light. RT8 8 Zone Dimming LVD RED Technical Parameters Input and Output Output signal Working voltage Working current Standby current Standby time Remote distance RF(2.4GHz) 3VDC(AAAx2) 5mA 10A 1 year 30m(Barrier-free space) Environment Operation temperature IP rating Ta: -30 OC ~ +55 OC IP20 User Manual Ver 1.0.7 Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification Warranty Warranty Weight Net weight Gross weight EN301 489,EN 62479 EN60950 EN300 328 CE,EMC,LVD,RED 5 years 0.048kg 0.088kg Mechanical Structures and Installations 53.00 mm 17.50 mm RT1,RT6,RT8 Touch Wheel RF Remote Controller 122.00 mm 53.00 mm 58.00 mm 33.00 mm 22.00 mm To x the remote, two options are offered for selection: Option 1: fix the remote' back holder on the wall with two screws. Option 2: adhere the remote' back holder to the wall with paster. 3VDC(AAAx2) Battery Back holder Operation When turn on light, the indicator display blue. when turn off light, the indicator display red. When touch the color wheel, the indicator will display the same color. When press or touch operation is invalid (If the light is off), the indicator display red. To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state. Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. Use Power Restart Match: Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. Delete: .Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. Page 1 Key function RT1 1 zone dimming remote 30s S1 S2 S3 S4 : Turn on/off light. : Touch to change brightness. : Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment. : Small night brightness (10%). 30s : Turn off light after 30s, long press 2s will turn off light after 60s. : 25%, 50%, 75%,100% brightness. S1 S2 S3 S4 : Short press recall the scene, long press 2s save current brightness into S1/2/3/4. the LED indicator display green when save OK. RT6 4 zone dimming remote 1234 S1 S2 S3 S4 : Short press turn on/off all zone light. : Touch to change current zone brightness. 1 2 3 4 : Short press select and turn on zone light, long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously. : 25%, 50%, 75%,100% brightness for current selected zone. S1 S2 S3 S4 : Short press recall the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK. 4 zone recall or save synchronously. User Manual Ver 1.0.7 RT1,RT6,RT8 Touch Wheel RF Remote Controller RT8 8 zone dimming remote 1234 5678 S1 S2 S3 S4 : Short press turn on/off all zone light. : Touch to change current zone brightness. 1 2 3 4 : Short press select and turn on zone light, long press 2s turn off zone light. 5678 Short press multiple zone key fastly, will select multiple zone synchronously. S1 S2 S3 S4 : Short press recall the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK. 8 zone recall or save synchronously. Safety information 1. Read all instructions carefully before you begin this installation. 2. When installing batter y, pay attention to the batter y positive and negative polarity. A long time without the remote control, remove the batter y. When remote distance becomes smaller and insensitive, replace the batter y. 3. If no response from the receiver, please re-match the remote. 4. Gently handle remote, beware of falling. 5. For indoor and dr y location use only. Page 2Corel PDF Engine Version 16.1.0.843