Manuals+

WAGO 2002-2201 Double-Deck Terminal Block

Item Number: 2002-2201

Type: Double-deck terminal block; Through/through terminal block; L/L; without marker carrier; suitable for Ex e II applications; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; Push-in CAGE CLAMP®; 2,50 mm²; gray

Ratings per IEC/EN 60664-1

Nominal voltage (III/3)500 V
Rated surge voltage (III/3)6 kV
Rated current24 A
Rated current 228 A
Legend (ratings)(III/3) Overvoltage category III / Pollution degree 3

Approvals per UL 1059

Rated voltage UL (Use Group B)300 V
Rated current UL (Use Group B)20 A
Rated voltage UL (Use Group C)300 V
Rated current UL (Use Group C)20 A
Rated voltage UL (Use Group D)600 V
Rated current UL (Use Group D)5 A

Approvals per CSA

Rated voltage CSA (Use Group B)600 V
Rated current CSA (Use Group B)20 A
Rated voltage CSA (Use Group C)600 V
Rated current CSA (Use Group C)20 A

Approvals Ex

Rated voltage EN (Ex e II)440 V
Rated current (Ex e II)20 A
Rated current (Ex e II) with jumper18 A

Connection Data

Connection technology: Push-in CAGE CLAMP®

Number of connection points (connection type): 2

Actuation type: Push-in, Open Tool Slot

Connectable conductor materials: Copper

Nominal cross-section: 2.5 mm²

Solid conductor: 0.25 ... 4 mm² / 22 ... 12 AWG

Solid conductor; push-in termination: 0.75 ... 4 mm² / 18 ... 12 AWG

Fine-stranded conductor: 0.25 ... 4 mm² / 22 ... 12 AWG

Fine-stranded conductor; with insulated ferrule: 1 ... 2.5 mm² / 18 ... 14 AWG

Fine-stranded conductor; with ferrule; push-in termination: 1 ... 2.5 mm² / 18 ... 14 AWG

Strip length: 10 ... 12 mm / 0.39 ... 0.47 inch

Number of connection points: 2

Total number of connection points: 4

Total number of potentials: 2

Number of levels: 2

Wiring type: Front-entry wiring

Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.

Geometrical Data

Width: 5.2 mm / 0.205 inch

Height from upper-edge of DIN-rail: 51.7 mm / 2.035 inch

Depth: 69.7 mm / 2.744 inch

Mechanical Data

Design: horizontal type

Mounting type: DIN-35 rail

Potential marking: L/L

Marking level: Center/side marking

Material Data

Color: gray

Insulation material: Polyamide 66 (PA 66)

Fire load: 0.204 MJ

Weight: 10.2 g

Commercial Data

Product Group: 22 (TOPJOB S)

Packaging type: BOX

Country of origin: DE

GTIN: 4044918753517

Customs tariff number: 85369010000

Approvals / Certificates

Ex-Approvals

LogoApprovalAdditional Approval TextCertificate name
AExAExUL 6007920190704-E185892
ExATEXEN 60079PTB 03 ATEX 1162 U (II 2 G/D Ex e II bzw. I M 2 Ex e I)
IECExIECExIEC 60079IECEx PTB 03.0004U (Ex eb IIC Gb or Ex eb I Mb)

Country Specific Approvals

LogoApprovalAdditional Approval TextCertificate name
CCACCA DEKRA Certification B.V.EN 60947NTR NL 7730
CSACSA DEKRA Certification B.V.C22.2 No. 1581536069
KEMA/KEURKEMA/KEUR DEKRA Certification B.V.EN 6094771-107687

Ship Approvals

LogoApprovalAdditional Approval TextCertificate name
ABSABS American Bureau of ShippingEN 6094720-HG1941090-PDA
BVBureau Veritas S.A.EN 6094738586/A0 BV

UL-Approvals

LogoApprovalAdditional Approval TextCertificate name
CUScURus Underwriters Laboratories Inc.UL 105920190731-E45172

Compatible Products

Protective Warning Marker

Item no.: 2002-115: Protective warning marker; with high-voltage symbol, black; for 5 terminal blocks; yellow (www.wago.com/2002-115)

Plug

Item no.: 2002-880: Empty component plug housing; 10.4 mm wide; 2-pole; Type 4; gray (www.wago.com/2002-880)

Related Products

End Plates

Jumpers

Marking Accessories

Tools

Ferrules

Carrier Rails

Insulation Stops

Push-In Type Wire Jumpers

Check

Downloads

Documentation

CAD/CAE-Data

Installation Notes

Conductor Termination

All conductor types at a glance. Terminating solid and ferruled conductors via push-in connection. Inserting conductors via push-in termination. Solid conductors with cross-sections from either one size above, or up to two sizes below, the rated cross-section can be simply pushed in - no tools needed.

Connecting Fine-Stranded Conductors

Connecting fine-stranded conductors without ferrules, or small cross-sectional conductors that cannot be pushed in, is performed similarly to the original CAGE CLAMP® - just use an operating tool.

Smart Feature

To open the clamp, the operating tool is inserted vertically. The conductor entry is less than 15 degrees for easier wiring.

Commoning

Commoning two levels via double-deck vertical jumper (2002-492).

Product Family

TOPJOB® S

TOPJOB® S: In various industrial applications and modern building installations, WAGO's wide and versatile range of rail-mount terminal blocks provides more than just reliable electrical connections. Show all products from the family

PDF preview unavailable. Download the PDF instead.

Wago-Corporation-2002-2201-Double-Deck-Terminal-Block-Specification-Sheet

Related Documents

Preview WAGO 255-502 PCB Terminal Block Data Sheet
Detailed data sheet for the WAGO 255-502 PCB terminal block. Features include push-button operation, 2.5 mm² conductor capacity, 7.5/7.62 mm pin spacing, 2-pole configuration, CAGE CLAMP® connection, and commoning option. Includes electrical, physical, material, and approval data, as well as compatible accessories and installation notes.
Preview WAGO 2636-3104/020-000 PCB Terminal Block Data Sheet
Detailed data sheet for the WAGO 2636-3104/020-000 PCB terminal block. Features include 16 mm² conductor cross-section, 10 mm pin spacing, 4-pole configuration, and Push-in CAGE CLAMP® connection technology. Specifications cover electrical ratings, connection data, physical dimensions, material composition, environmental requirements, and approvals.
Preview WAGO 2-Conductor Ground Terminal Block 285-137/999-950 - Technical Data
Detailed technical specifications for the WAGO 2-conductor ground terminal block, item number 285-137/999-950. Features include POWER CAGE CLAMP technology, suitability for Ex e II applications, and 35 mm² conductor capacity.
Preview WAGO 261-311 2-Conductor Terminal Block Datasheet
Comprehensive datasheet for the WAGO 261-311 2-conductor terminal block, detailing its features, electrical and connection data, dimensions, material properties, certifications, and compatible accessories. Includes CAGE CLAMP® technology for secure connections.
Preview WAGO 281-611/281-418: 2-Conductor Fuse Terminal Block with Neon Indicator
Datasheet for the WAGO 281-611/281-418 2-conductor fuse terminal block. Features CAGE CLAMP® connection, pivoting fuse holder for 5x20mm fuses, neon blown fuse indication, 120V rating, and suitability for aluminum conductors with Alu-Plus Contact Paste.
Preview WAGO 221-415 Splicing Connector with Levers - Technical Data Sheet
Detailed technical specifications, features, and approvals for the WAGO 221-415 5-conductor splicing connector with levers. Suitable for various conductor types and sizes, offering tool-free connection and safety features.
Preview WAGO 231-304/026-000: 1-Conductor Female Plug Data Sheet | CAGE CLAMP®
Detailed data sheet for the WAGO 231-304/026-000, a 4-pole, 2.5 mm² 1-conductor female plug with 5.08 mm pin spacing, featuring CAGE CLAMP® connection technology. Includes technical specifications, approvals, and product details.
Preview WAGO 249-116 Screwless End Stop - Data Sheet & Specifications
Detailed datasheet for the WAGO 249-116 screwless end stop. Features include 6mm width, compatibility with DIN-rail 35x15 and 35x7.5, tool-free assembly, and RoHS compliance. Includes technical data, approvals, and compatible marking accessories.