FIRST ALERT
Cable Sensor for WiFi Water Leak and Freeze Detector
Model: WLD3CABLE
Application
The optional WLD3CABLE sensor for the WiFi Water Leak and Freeze Detector extends the device's water sensing range. Multiple cable sensors can be connected together for up to a total length of 500 feet (approximately 152 meters).
Installation Instructions
Installing Additional Cable Sensors
- Insert the plug from the accessory cable sensor into the jack on the water leak detector.
- For additional cable sensors, plug each new accessory sensor into the end of the previous accessory sensor, then plug the original cable sensor into the end of the cable.
Figure 1 Description: The diagram illustrates the connection process. It shows a cable sensor's plug being inserted into the corresponding jack on the main water leak detector unit. This connection allows for extending the detection range.
The detector and cable sensors are reusable. After an alarm, simply dry the detector and cable sensors and reinstall them in their original positions.
For detailed detector and cable sensor operation, please refer to the First Alert app and the product literature provided with the detector.
Extended Producer Responsibility
This product should not be disposed of with other household waste. Please check for the nearest authorized collection centers or authorized recyclers. The correct disposal of end-of-life equipment will help prevent potential negative consequences for the environment and human health.
Need Help?
Web: www.firstalert.com
Phone: 1-800-633-3991
