Fellowes AutoMax™ 200C/130C Paper Shredder

Limited Product Warranty

Fellowes, Inc. ("Fellowes") warrants the parts of the machine to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. The cutting blades are also warranted for 1 year. Your sole remedy is repair or replacement of the defective part at Fellowes' option. This warranty does not cover abuse, mishandling, improper usage, or unauthorized repair. Fellowes may charge for service outside the country of original sale. Implied warranties are limited to the duration of this warranty. Fellowes is not liable for consequential or incidental damages. This warranty provides specific legal rights, and terms may vary by local law.

Key Features and Controls

The Fellowes AutoMax 200C/130C shredder includes the following key features:

• A. Shredder Lid: The top cover of the shredder.
• B. Manual Feed Slot: For feeding individual sheets or smaller stacks of paper.
• C. Casters: Wheels for mobility (200C model only).
• D. Disconnect Power Switch: Located on the back, used to turn the shredder completely off (0) or enable operation (I).
• E. Safety Instructions: Refer to the safety instructions section for detailed information.
• F. Control Panel: Located on the top, with indicators and buttons for operation.
• G. Pull-Out Bin: The waste bin that slides out from the base.

Control Panel Details:

The control panel features the following indicators and controls:

• 1. Overheat (red indicator): Illuminates when the shredder has exceeded its maximum operating temperature.
• 2. Remove Paper (red indicator): Illuminates when paper is jammed or needs to be removed.
• 3. Bin Full (red indicator): Illuminates when the waste bin is full.
• 4. Bin Open (red indicator): Illuminates when the waste bin is not properly closed.
• 5. Reverse: Button to reverse the shredding direction (◀️◀️).
• 6. On/Off (blue indicator/button): Indicates power status and is used to turn the shredder on or off.
• 7. Start: Button to initiate the shredding process.

Important Safety Instructions

Read these instructions carefully before operating the shredder:

• ??? Keep away from children and pets. Keep hands away from the paper entry. Always set the power switch to OFF (0) or unplug when not in use.
• ??? Keep foreign objects like gloves, jewelry, clothing, and hair away from shredder openings. If an object enters the top opening, use the Reverse (◀️◀️) function to back it out.
• ?? Never use aerosol products, petroleum-based lubricants, or other flammable products on or near the shredder. Do not use canned air.
• ⚠️✋ Avoid touching exposed cutting blades under the shredder lid.
• ? Unplug the shredder before cleaning or servicing.
• ??? Do not use if damaged or defective. Do not disassemble the shredder. Do not place near or over heat sources or water.
• ⚡ The shredder has a Disconnect Power Switch (D) that must be in the ON (I) position to operate. In an emergency, move the switch to OFF (0) to stop the shredder immediately.
• The shredder must be plugged into a properly grounded wall outlet or socket matching the voltage and amperage on the label. The outlet must be easily accessible. Do not use energy converters, transformers, or extension cords.
• ? FIRE HAZARD - Do NOT shred greeting cards with sound chips or batteries.
• ? For indoor use only.

Capabilities

The AutoMax™ 200C and 130C shredders offer different capacities:

200C Model Capabilities:

Auto Feed Tray:

• Paper: 8-1/2" x 11"
• Staples: Up to 20 sheets stapled (pull apart stacks of more than 20 sheets)
• Paper clips: Up to 20 sheets clipped (pull apart stacks of more than 20 sheets)
• Paper: 8-1/2" x 14"
• Credit cards: Yes
• CD/DVD: Yes

Manual Feed Slot:

• Items: Junk mail, Folded paper

130C Model Capabilities:

Auto Feed Tray:

• Paper: 8-1/2" x 11"
• Staples: Up to 20 sheets stapled (pull apart stacks of more than 20 sheets)
• Paper clips: Up to 20 sheets clipped (pull apart stacks of more than 20 sheets)
• Paper: 8-1/2" x 14"
• Credit cards: Yes
• Folded paper: Yes

Manual Feed Slot:

• Items: Junk mail, Folded paper

Items Not Supported for Shredding:

• Adhesive labels, continuous form paper, folded paper (Autofeed), bound documents, magazines, transparencies, newspaper, cardboard, binder clips, industrial staples, large paper clips, more than 20 pages stapled or paper clipped together, staples in top center of paper, laminates, 3½ in. Floppies, file folders, X-rays, or plastic other than noted above.

Shred Size and Capacities:

*Capacity based on 8.5 in. x11 in., 20lb. (75g) paper at 120V, 50/60 Hz, 4.0 Amps. Heavier paper, humidity, or voltage other than rated may reduce capacity.

Basic Shredding Operation

Auto Feed Operation:

Note: Do not open lid once shred cycle has started.

1. Plug in the shredder and set the disconnect power switch to ON (I).
2. Open the lid.
3. Add paper, ensuring it is flat and aligned with the front of the paper tray.
4. Close the lid and press the Start button (▶️) to begin shredding.

Continuous Operation Limits:

• 200C: 12-minute maximum. After 12 minutes, the shredder will trigger a 25-minute cool-down period.
• 130C: 10-minute maximum. After 10 minutes, the shredder will trigger a 25-minute cool-down period.

Manual Feed Operation:

Note: Manual feed cannot be used while Auto Feed is in use.

1. Plug in the shredder and set the disconnect power switch to ON (I).
2. Feed paper straight into the paper entry and release.
3. For CDs/Cards (200C only): Hold the CD or card at the edge and feed straight into the paper entry and release.

Advanced Product Features

• SilentShred™ Technology: Provides quiet operation, reducing noisy disruptions.
• Energy Saving Sleep Mode: The shredder automatically shuts down after 2 minutes of inactivity to save energy.

Exiting Sleep Mode:

1. To exit sleep mode, simply open the lid or insert paper.

For more information on advanced features, visit www.fellowes.com.

Product Maintenance

Oiling Shredder:

All cross-cut shredders require oil for peak performance. Failure to oil may result in diminished sheet capacity, increased noise, and eventual shutdown. It is recommended to oil the shredder each time the waste bin is emptied.

Oiling Procedure (Repeat Twice):

1. Open the lid.
2. Carefully apply shredder oil across the cutters. Do not get oil in the paper tray. (Note: Only use a non-aerosol vegetable oil in a long nozzle container, such as Fellowes 35250).
3. Close the lid. Press and hold the Forward button (▶️) for 2-3 seconds.

Cleaning Auto-Start Infrared Sensors:

Paper detection sensors are designed for maintenance-free operation. However, paper dust can sometimes block these sensors, causing the motor to run even when no paper is present. The sensors are located in the center of the paper entry.

To Clean the Sensors:

1. Turn off and unplug the shredder.
2. Open the lid.
3. Locate the Auto-start infrared sensor in the center of the paper entry.
4. Dip a cotton swab in rubbing alcohol.
5. Using the cotton swab, wipe away any contamination from the paper sensors.

Troubleshooting

• Overheat Indicator: If illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. The indicator will remain lit, and the shredder will not operate until it has cooled.
• Remove Paper Indicator: If illuminated, press the Reverse button (◀️◀️), open the lid, and remove the paper jam.
• Bin Full Indicator: If illuminated, the waste bin is full and needs to be emptied. Use Fellowes waste bags (e.g., 36053).
• Bin Open Indicator: If illuminated, the shredder will not run. Close the bin properly to resume shredding.
• Misaligned Paper: If paper is not shredding correctly through the auto feed tray, check the position of the paper. Paper should be flat and aligned with the front of the paper tray.

* Shredder will not run when the lid is open.