Dewalt Power Tool Battery Chargers
Instruction Manual
Suitable for Dewalt
Battery Charger Instruction
Before use this appliance, read this instruction carefully!
SAFETY RULES FOR DEWALT CHARGER
- Protect the battery charger from rain and moisture. Water penetration in a battery charger increases the risk of electric shock.
- Do not charge other batteries. The battery charger is suitable only for charging matched lithium-ion batteries within the listed voltage range, otherwise there is danger fire and explosion.
- Keep the battery charger clean. Contamination may increase the risk of electric shock.
- Before using, always check the charger, cable and plug. If defects are detected, do not use the charger; never open the charger.
- Instead, have it opened and repaired only by qualified personnel who will use original spare parts. Damaged chargers, cables and plugs increase the risk of electric shock.
- Do not operate the charger on easily inflammable surface (e.g. paper, textiles, etc.) or combustible surroundings. The heating of the charger during charging may cause a fire.
- Plug the charger within the listed voltage range on the charger.
- Unplug the charger from the electrical outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.
- Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening.
- Risk of electric shock. Do not touch the un-insulated portion of output connector or un-insulated battery terminal.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- When the power cord damage, do not change it yourself, please return to our service organization or as help for a qualified person.
- Against recharging non-rechargeable batteries.
Instructions
1. BATTERY CHARGING
Please Indoor charging.
Use only the battery chargers listed on the accessories page.
Only these battery chargers are matched to the lithium-ion battery of your power tool.
The battery is supplied partially charged. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time. The lithium-ion battery can be charged at any time with out reducing its service life. Interrupting the changing procedure does not damage the battery.
To remove the battery, press the battery release button and pull out the battery downwards.
Do not exert any force.
The battery is equipped with an NTC temperature control which allows charging only within a temperature range of between 5°C and 40°C. A long battery service life is achieved in this manner observe the notes for disposal.
