Car Wireless Charging Bracket

Packing List

• Car Magnetic Wireless Charger
• 45W Adapter
• USB-A to USB-C Charging Cable (1m)

Product Description

This section describes the components of the car wireless charging bracket system.

[Diagram: A sleek, black car wireless charger with a green accent, featuring a circular charging pad with illuminated radial markings and a central lightning bolt symbol.] Car Magnetic Wireless Charger

[Diagram: A line drawing of a car charger adapter designed to plug into a car's power outlet.] 45W Adapter

[Diagram: A line drawing of a USB-A to USB-C cable, approximately 1 meter in length.] USB-A to USB-C Charging Cable (1m)

[Diagram: Illustrates the main body of the bracket with labels pointing to 'Main body fixings', 'Brackets', 'Indicator light', and 'Charging Port'. The main body appears to have an adjustable clamp mechanism.] Product Assembly Details

How to Install the Bracket

Follow these steps for correct installation:

1. Turn the shaft fixing piece to the left slightly, loosening it. [Diagram: Shows the shaft fixing piece being turned counter-clockwise to loosen.]
2. Insert the bracket's round ball part into the main body fixing. [Diagram: Shows the ball joint being inserted into its socket on the main bracket body.]
3. Rotate the shaft fixing to the right until it is completely fixed. [Diagram: Shows the shaft fixing being turned clockwise to secure the ball joint.]
4. Complete the installation of the bracket. [Diagram: Shows the fully assembled bracket securely attached to a car air vent.]

Specifications

How to Use the Product

After the bracket is installed:

1. Rotate the clamp shaft to the right to open the clamp mouth. [Diagram: Shows the clamp mechanism opening.]
2. Attach the clamp mouth to the car air vent. Rotate it to the left to narrow the clamp mouth, securing it to the vent. [Diagram: Shows the clamp being attached to and tightened onto a car air vent.]
3. Place your phone onto the wireless charger. [Diagram: Shows a phone being placed onto the wireless charging pad.]
4. Connect the charger to the power supply to begin charging.

Indicator Light Status:

• Initial state (blue and green lights for 3 seconds): Off.
• Standby: Green light is always on.
• Charging: Blue light slowly flashes (breathing effect).
• Fully charged: Light turns off.
• Abnormal charging: Green light flashes.

Compatible Models

For iPhone:

• iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max
• iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 mini
• iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max

Warm Tips

Please pay attention to the following issues, otherwise it may cause irregular charging, high charging temperature, intermittent charging, or even no charging:

• Not compatible with devices other than Apple, such as Samsung.
• Please place your phone in the correct charging area on the pad.
• The charging distance is 2-8 mm; please do not use a protective cover thicker than 3 mm.
• Do not place metal or magnetic objects within the 6 cm center area on the back of the phone during charging.
• Charging speed is faster at lower temperatures.
• Charging speed is faster in winter than in summer.
• Avoid charging in hot and humid environments to prevent circuit damage.
• Keep out of reach of children to prevent accidents.
• Ensure you use the original charging cable and adapter.

About the FCC

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Warning:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.