Overview
This installation guide provides comprehensive instructions for deploying the Cisco Cyber Vision Network Sensor. It details the necessary steps for a clean installation on the Cisco IE3300 10G Rugged Series Switch, Cisco IE3400 Rugged Series Switch, and Cisco Catalyst 9300 Series Switch. The guide is applicable to system version 3.2.0.
Key Features and Procedures
- Hardware Requirements: Details the necessary hardware components and their specifications.
- Initial Configuration: Covers checking hardware versions, formatting SD cards and SSD disks, and setting the correct date and time.
- Installation Methods: Explains procedures using the Cyber Vision sensor management extension, the switch's Local Manager, and the Command Line Interface (CLI).
- System Compatibility: Ensures the sensor application is compatible with the specified Cisco switch software versions.
Target Audience
This guide is intended for network engineers and IT professionals responsible for deploying and managing network security and visibility solutions within Cisco environments.
Further Information
For more details on Cisco trademarks, visit www.cisco.com/go/trademarks. For Cisco office locations worldwide, refer to www.cisco.com/go/offices.
