Y13 Pro Quick Start Manual

Product Overview

This section details the key components and indicators of the Y13 Pro headset.

Indicators:

Wireless indicator light (blue)
Intercom indicator light (green)
Music sharing indicator (white)

Controls:

Volume down / Previous song button
Volume up / Next song button
Voice assistant button
Intercom button
Music sharing button
Charging port
Charging indicator (red)

Important Reminder: Before installing the headset, connect your mobile phone to test sound effects and volume. Adjust speaker position inside the helmet if needed.

Telephone Function

Manage calls with your connected mobile device.

Incoming Call:
Automatic Answer (after 15 seconds): ? (Incoming call) ➡️ ? (On the phone)
Manual Answer: ? (Incoming call) ➡️ Short press [Answer button] ➡️ ? (On the phone)
Decline Call: ? (Incoming call) ➡️ Long press 2 seconds [Decline button] ➡️ ? (Call declined)
Hang Up Call: ? (On the phone) ➡️ Short press [Hang up button] ➡️ ? (Call ended)
Redial Last Number: ? (Making a phone call) ➡️ Double click [Voice assistant button] ➡️ ? (Redialing)
Cancel Call: ? (Making a phone call) ➡️ Short press [Voice assistant button] ➡️ ? (Call cancelled)

Music Function

Control music playback.

Play/Pause: ? (while music is paused) ➡️ Short press [Play/Pause button] ➡️ ? (music playing)
Play/Pause: ? (while music is playing) ➡️ Short press [Play/Pause button] ➡️ ? (music paused)
Next Song: ? (while music is playing) ➡️ Long press [Volume up button] ➡️ ? (Next song)
Previous Song: ? (while music is playing) ➡️ Long press [Volume down button] ➡️ ? (Previous song)

Voice Assistant

Activate your device's voice assistant.

Long press the voice assistant button to wake up the voice assistant.
Long press again to exit the voice assistant (exiting depends on the phone).

Charging Function

Charge your device.

Charging red light is always on while charging.
Red light goes out when fully charged.
When the device is switched on and plugged in, it will automatically switch off to charge.

Intercom Reset

Reset intercom connection.

Introduction to wireless intercom connection operation: Intercom and music sharing are switched off by default each time the device is powered on.

Intercom Back Connect: When connected machines are on, short press the intercom button to enter intercom mode. Short press the corresponding pairing key on the host to connect back to other machines.
Phone Priority: After powering on and connecting wirelessly, if there's an incoming call or outgoing call, the device automatically prioritizes phone mode and resumes the previous mode after hanging up.
Clear Wireless Pairing (Restore Factory Settings): Power on without connecting wireless or intercom. Long press the Volume Down and Volume Up buttons simultaneously for 5 seconds. Wireless pairing information will be cleared, and the indicator light will flash rapidly.

Power on/off

Press and hold for 3 seconds to power on/off.
Double click to switch language broadcasting (disconnects wireless).

Wireless Connection

Understand wireless pairing status.

Wireless Waiting for Pairing: LED blinks rapidly.
Successful Wireless Pairing: LED flashes slowly.
Power on tone indicates the device is ready.
Wireless mode tone indicates wireless connection is active.
Paired cue indicates successful pairing.

Intercom Pairing

Connect two devices for intercom.

After powering on, short press the intercom button on both devices to enter intercom mode.
Intercom Pairing Status: Green LED flashes rapidly, accompanied by an 'intercom pairing' tone.
Intercom Pairing Successful: Green LED lights up continuously, with a 'connected' tone. Two people can now talk.
Short press the intercom button again to exit intercom mode.

Turn on/off RGB lighting

Control the device's RGB lighting.

Simultaneously short press the 'Intercom key + Volume Up key' to switch through 13 light modes.
After switching to the last light mode, short press them again simultaneously to turn off the light (default is on).

Music Sharing Pairing / Intercom and Music Sharing Coexistence

Manage audio sources and modes.

Music Share Pairing Status: White light blinking fast.
Music Share Pairing Successful: White Indicator Light Long On.
Modes: Intercom, Mixing, Music Sharing.
Operation:
- When intercom is successful, connect one device to a mobile phone for music.
- Double-click the 'Intercom button' to enter Mixing Mode (intercom and music sharing simultaneously). Both green and white LEDs are on.
- Double-click the 'Intercom button' again to switch to Music Sharing Mode (only music sharing). White LED is on.
- Double-click again to return to Intercom Mode.
- In Music Sharing Mode, long press Volume Up/Down to adjust the volume of music sharing and wireless music simultaneously.

Mixing Function

Hear multiple audio sources at once.

Intercom and wireless audio can be mixed and output to the speaker simultaneously.
Intercom and wireless can work independently without affecting each other.

Navigator Intercom

Control volume and track navigation.

When intercom is successfully connected:
1. Short press 'Volume Up/Down keys' to adjust the volume of wireless music.
2. Long press 'Volume Up/Down keys' to adjust the volume of the intercom.
3. Double-click 'Volume Up/Down keys' to switch between previous and next songs of wireless music.

Dating Mode (Connecting Third Parties)

Pair with other devices.

Short press the Volume Up and Down buttons simultaneously to enter dating mode.
Short press them again simultaneously to exit dating mode.
Dating Mode Waiting for Pairing: Wireless LED light flashes super fast.
Successful Pairing in Dating Mode: Wireless LED lights up continuously.

Product List

Y13 Pro Device * 1
Speakers & Microphone * 1
Clip on Base * 1
Velcro Package * 1
Type-C Charging Cable * 1
User Manual * 1

Caveat

Important safety warnings:

Do not expose the product to flame to avoid explosion.
Do not disassemble the product to prevent damage to electronic components.
Keep away from sharp objects to avoid product damage.
Store in a dry place if not used for a long time.
Fully charge the wireless device before use.
If the red charging light does not come on, the voltage may be too low.
To extend battery life, charge the device at least once a month.

Instruction Warning (FCC Compliance)

NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.