Introduction to the CryoMed Controlled Rate Freezer
This document serves as the comprehensive user and maintenance manual for the Thermo Scientific CryoMed Controlled Rate Freezer, specifically for the Model 7450 and 7470 Series. These advanced freezers are designed for precise sample preparation and storage at cryogenic temperatures, supporting critical medical and research applications.
The manual provides detailed information on the features, setup, and operation of the CryoMed freezers. It includes essential guidance on maintenance procedures, specifications, and troubleshooting to ensure optimal performance and longevity of the equipment.
For detailed operational procedures, safety precautions, and technical specifications, please refer to the respective sections within this manual.
Key Features and Applications
The CryoMed Controlled Rate Freezers are engineered for versatility and reliability. They are utilized as sample preparation devices for storage at cryogenic temperatures (-130°C or below), making them suitable for various medical applications. Key intended uses include:
- Sample preparation for research purposes.
- Medical devices for diagnostic use, particularly for non-IVF chambers, preparing samples not intended for reintroduction into the human body (e.g., primary cell lines, stem cells).
- Medical devices for targeted treatment in IVF applications, preparing samples for reintroduction into the human body (e.g., sperm, ova).
Safety and Handling
Important safety instructions are provided throughout the manual. Users are advised to read and understand all operating and maintenance instructions before use. Key safety considerations include:
- Adherence to proper lifting techniques for units weighing over 50 lbs (22.7 kgs).
- Awareness of potential electrical hazards, requiring operation by qualified personnel.
- Understanding of low-temperature and freezing hazards, especially when handling liquid nitrogen.
- Ensuring adequate ventilation to mitigate asphyxiation hazards.
- Following guidelines for electrostatic discharge (ESD) precautions.
Further Information and Support
For additional information, technical support, or to register your warranty, Thermo Fisher Scientific can be contacted via:
- Phone: 1-740-373-4763 or 1-800-438-4851
- Website: www.thermofisher.com
- Warranty Registration: www.thermoscientific.com/labwarranty
- Email: service.led.marietta@thermofisher.com
