Mark Mann Signature Kit

Features

The Mark Mann Signature Kit includes the following key components:

• V-mount Plate: For mounting accessories and power sources.
• Magnet: For magnetic attachment to surfaces.
• RGBCW LED: Full spectrum color LED for advanced lighting.
• Bi-Color LED: For adjustable white light color temperatures.
• Power On/Off Button: Controls the device power.
• Brightness Adjustment Dial [LM Dial]: Controls light intensity.
• Color Temperature Adjustment Dial [CCT Dial]: Controls white light color temperature.
• Type-C Charging Port: For charging the device.
• LCD Screen: Displays current settings and status.

Single Light Use

Barndoors & Diffusion Panel Installation

1. Attach two magnetic barndoors to the slots at both ends of the light blade, ensuring they click into place.
2. Attach the magnetic diffusion panel to the slots at both ends of the light blade, ensuring it clicks into place.

Basic Settings

The light features three main controls:

• Color Temperature Adjustment Dial [CCT Dial]
• Brightness Adjustment Dial [LM Dial]
• Power On/Off Button [Power Button]

Power On/Off

• Power On: Press the power button, then rotate the [LM Dial] to turn on the light.
• Power Off: Press the power button to turn off the light.

White Light Mode

Brightness Adjustment

1. Rotate the [LM Dial] to adjust brightness.
2. Adjustable range: 0 - 100%.
3. Press the [LM Dial] for shortcuts.

Color Temperature Adjustment

1. Rotate the [CCT Dial] to adjust color temperature.
2. Adjustable range: 1700K-10000K.
3. Press the [CCT Dial] for shortcuts from 2700K to 6500K.

RGBCW Mode

Mode Switching

1. Long press the [CCT Dial] for 1.5 seconds to switch to RGBCW mode.
2. Long press the [CCT Dial] again for 1.5 seconds to switch back to White Light Mode.
3. In RGBCW mode, press the [CCT Dial] to switch between saturation and color gamut adjustment interfaces.

Brightness Adjustment

1. Rotate the [LM Dial] to adjust brightness.
2. Adjustable range: 0-100%.
3. Press the [LM Dial] for shortcuts.

Saturation Adjustment

1. Rotate the [CCT Dial] to adjust saturation.
2. Adjustable range: 0-100.

Color Gamut Adjustment

1. Rotate the [CCT Dial] to adjust the color gamut.
2. Adjustable range: 0-360.

Menu Selection

1. Long press the [Power Button] for 1.5 seconds to enter the menu selection interface.
2. Rotate the [CCT Dial] to select the menu.
3. Press the [CCT Dial] to enter the sub-menu.
4. Long press the [Power Button] for 1.5 seconds to exit the menu interface.

Using Four Lights Together

Setup

1. Connect the 4 V-mount magic arms to the [V-mount Plates] on both ends of the 4 lights to form a square.
2. Attach the 2 V-mount handles to the outer [V-mount Plates] of the 2 lights on the vertical sides of the square.
3. Mount the assembled lights on 2 tripods (not included), ensuring a secure connection.
4. Fix the 1-to-5 adapter on the tripod, ensuring it's secure.
5. Attach the V-mount clamp to the tripod and adjust to the desired height.
6. Install the remote control panel's charging base and the 100W power supply on the V-mount clamp.
7. Connect one end of the D-Tap cable to the 100W power supply and the other end to the 1-to-5 adapter.
8. Select the appropriate length of Type-C charging cables. Connect one end of each cable to the 1-to-5 adapter and the other end to the charging ports of the 4 lights and the remote control panel's charging base.
9. Attach one end of the large magic arm to the magnetic plate and the other end to the [V-mount Plate] on the side of any light. You can then magnetically attach your phone or other devices to the magnetic plate.

Remote Control Panel Operation

Power On/Off

• Power On: Short press the right-most button on the remote control panel.
• Power Off: Long press the [LM Dial] on the remote control panel for 1.5 seconds.

Pairing

1. Power on each light individually (same operation as "Single Light Use").
2. Long press the [LM Dial] on each light for 1.5 seconds until the [Bluetooth Symbol] flashes on the display.
3. Long press any button on the remote control panel for 1.5 seconds until the [Bluetooth Symbol] flashes. When the background on the display highlights in blue, pairing is successful.
4. After successful pairing, the same number will appear on both the remote control panel and the light displays.
5. You can start adjusting the light settings via the remote control panel 5 seconds after successful pairing.
6. Short press the button to deselect a light. Press it again to re-select the paired light.

White Light Mode

Adjusting Brightness

1. Rotate the [LM Dial] on the remote control panel to adjust brightness.
2. Adjustable range: 0-100%.
3. Press the [LM Dial] for shortcuts.

Adjusting Color Temperature

1. Rotate the [CCT Dial] on the remote control panel to adjust color temperature.
2. Adjustable range: 1700K-10000K.
3. Press the [CCT Dial] for shortcuts from 2700K to 6500K.

RGBCW Mode

Mode Switching

1. Long press the [CCT Dial] on the remote control panel for 1.5 seconds to switch to RGBCW mode. Long press again for 1.5 seconds to switch back to white light mode.
2. In RGBCW mode, press the [CCT Dial] to switch between saturation and color gamut adjustment interfaces.

Adjusting Brightness

1. Rotate the [LM Dial] on the remote control panel to adjust brightness.
2. Adjustable range: 0-100%.
3. Press the [LM Dial] for shortcuts.

Adjusting Saturation

1. Rotate the [CCT Dial] on the remote control panel to adjust saturation.
2. Adjustable range: 0-100.

Adjusting Color Gamut

1. Rotate the [CCT Dial] on the remote control panel to adjust the color gamut.
2. Adjustable range: 0-360.

App Download

You can download the Harlowe app in the (Apple) App Store and Google Play store.

Visit www.harlowe.com for more information.

Warnings

• Please thoroughly read the manual prior to operating the product and operate in strict accordance with the manual.
• Do not disassemble the product by yourself. If the product requires repair, contact maintenance personnel.
• Product failures caused by unauthorized disassembly are not covered by warranty and will be chargeable.
• The product is designed to be actively cooled by fans. Do not block the fan ducts during operation.
• Do not touch the heat-generating parts of the product during operation to avoid scalding injury.
• The power must be switched off during set-up and break down of the product.
• Do not submerge the product in water or other liquids to avoid safety risks and product failure.
• Allow the product to properly cool after each use before storage.
• Only use the originally supplied accessories to avoid product failure.
• Only use the supplied charging adapter and power cable to avoid damage to the product.

Product Specifications

Light Only

Warranty Terms

Harlowe provides a two-year warranty period for the original buyer of the product. For the detailed warranty scope, please visit the website.

Important Notes:

• Please retain your original purchase invoice and warranty card. Ensure complete supplier information is on the invoice, including purchase date and product serial number, for warranty claims.

The Warranty Does Not Cover:

• Damage caused by improper use, false wiring, incompatible, poor quality, or mis-adjusted external devices.
• Damage to the product's appearance from mishandling or abuse.
• Exposure to rain or water.
• Damage caused by transportation. Contact your dealer to issue a claim.

The Warranty Will Be Invalid If:

• The product serial number has been torn off or cannot be identified.
• The product has been repaired or modified by unauthorized persons.

Warranty Card