Instruction Manual for homestyles models including: 6800-60 Outdoor Loveseat, Outdoor Loveseat, 6800-60 Loveseat, Loveseat, 6800-60
File Info : application/pdf, 5 Pages, 599.67KB
DocumentDocument2001-201-FB80 Loveseat IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Base 1 pc. E. Back 1 pc. G. Back Cushion 2 pcs. For assembly see instructions in carton 2001-202-FB80. homestyles Customer Service: www.homestylesfurniture.com, servicedesk@homestylesfurniture.com, 888-680-7460 2001-202-FB80 Loveseat IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List B. Foot 4 pcs. C. Side 1 pc. D. Side 1 pc. F. Seat Cushion 2 pcs. Carton 2001-201-FB80 is also needed for assembly. homestyles Customer Service: www.homestylesfurniture.com, servicedesk@homestylesfurniture.com, 888-680-7460 Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. C A Metal Slot STEP 1 Attach Base (A) to Side (C) by sliding metal slots into position. (See Figure 1) Attach Side (D) to unit by sliding metal slots into position. D Figure 1 B B B STEP 2 B Attach Feet (B) to unit, then tighten. Back Cover Assembly Instructions 3/3 E C Metal Slot STEP 3 Align the metal brackets of the Back (E) to brackets of each Side (C & D) and insert at the same time. Lock Back (E) in position with latches. (See Figure 2) Attach back cover to back of unit. (See Figure 3) D Latch Figure 2 Figure 3 G G F F STEP 4 Place Seat Cushions (F) into position. Place Back Cushions (G) into position. CARE INSTRUCTIONS NEVER allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. Do not use power tools above 8 volts to assemble. PREVENT CRACKING Do not place in direct sunlight. PREVENT FADING Do not write directly on surface. PREVENT MARKING Do not place hot objects on surface. PREVENT FINISH DAMAGE Do not use rubber based placemats. PREVENT DISCOLORING Do not use commercial waxes and polishes. PREVENT YELLOWING CLEAN with a soft cloth moistened in lukewarm soap and water. Buff with a dry clean cloth. homestyles will provide replacements free of charge for missing or damaged parts within 1 year of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer, homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below. homestyles Customer Service: www.homestylesfurniture.com, servicedesk@homestylesfurniture.com, 888-680-7460