GAMEMAX V5.0 PWM ARGB HUB USER MANUAL

Connection Diagram

The diagram illustrates the setup for the GAMEMAX V5.0 PWM ARGB HUB. It shows a central hub unit with multiple ports.

Hub Ports: The hub features ports labeled: POWER, RESET, 5V, 12V, ARGB (multiple), PWM (multiple), PC-IN1, LED-KEY1. Specific connections are indicated for FAN1 through FAN6.

Power and Control Connections:

• A SATA Power input connects to the hub.
• A connection labeled "Link LED SW or RESET Button, Manual ARGB Control" is shown.
• A "5V 3pin AURA Cable" connects to an ARGB port.
• A "PWM TEMP Cable" links to the CPU Fan socket, connecting to the CPU Cooler Fan's 1st PWM Port (Red).

Visual Warning: A warning symbol ⚠️ is displayed with the text: "Please do not plug in the wrong power interface, otherwise it will burn out equipment!"

The diagram also shows three fans connected to PWM ports and one CPU cooler fan connected via the PWM TEMP cable.

Remote Control Button Function

The remote control allows for various lighting and fan adjustments.

Button Functions:

• ON/MB SYNC: Toggles between manual control and motherboard synchronization.
• Mode +: Cycles through lighting modes.
• Fan Speed +: Increases fan speed.
• Fan Speed -: Decreases fan speed.
• Mode -: Cycles through lighting modes in reverse.
• Static Color Button: Selects static colors.
• AUTO: Initiates an automatic mode cycle.
• Off: Powers off the lighting effects.
• S+ / S-: Adjusts static brightness (increase/decrease).
• M+ / M-: Adjusts fan speed (increase/decrease).

Special Functions:

• Double click 10 times (PassCode/PairCode): Initiates pairing mode.
• PairCode, quick flash 3 times: Indicates successful pairing.
• PassCode, slow flash 3 times: Indicates pairing failure or reset.
• Double click 10 times (RGB sequence adjustment): Enters RGB sequence adjustment mode.
• Press the red key until the red: Sets the RGB color to red.
• Press the greey key until the green: Sets the RGB color to green.
• Press OFF key to save: Saves the current settings.