NUARL N6 mini2 Truly Wireless Earbuds User Manual
Product Overview
The NUARL N6 mini2 are truly wireless stereo earbuds designed for high-quality audio and comfortable wear. They feature Bluetooth 5.2 connectivity, IPX7 water resistance, and an ergonomic design.
Components:
- Earbuds: Left and Right units, each equipped with a Tap Area for controls, an LED/Front Microphone, and a Rear Microphone.
- Charging Case: A compact case for storing and recharging the earbuds.
- USB Charge Cable: Included cable for charging the case (Type-C to USB-A).
- Ear Tips: Multiple sizes of ear tips are provided to ensure a secure and comfortable fit for different users.
Getting Started
Before Use
Remove Insulating Sheet: Before the first use, carefully peel off the insulating sheets located on the back of each earbud.
Battery Charge: Connect the included USB Type-C to USB-A cable to a USB power source (such as a USB AC adapter or computer USB port). Plug the Type-C end into the charging case's USB port. Place the earbuds into the charging case to begin charging. The LED indicator on the case will glow orange while charging and will turn off upon completion.
Power On/Off: The earbuds automatically power on when removed from the charging case and power off when placed back inside. Note: This automatic power function may not operate if the charging case battery is low.
Pairing
Pairing is required to connect the earbuds to your device (e.g., smartphone) for the first time. Once paired, the earbuds will automatically connect when powered on.
First-time Pairing:
- Enable the Bluetooth function on your mobile device.
- Turn on the earbuds.
- On your device's Bluetooth settings screen, select "NUARL N6 mini2 SE" from the list of discovered devices.
- Confirm the connection on your device's screen; pairing is now complete.
Re-pairing or Pairing with a Second Device:
- Enable the Bluetooth function on your mobile device.
- When the earbuds are not connected to any other device, the LED indicators will blink white and orange alternately after approximately 6 seconds.
- On your device's Bluetooth settings screen, select "NUARL N6 mini2 SE".
- Confirm the connection on your device's screen; pairing is now complete.
Charging Case Functions
Charging the Case Battery: Connect the USB charge cable to the charging case and a USB power source. The battery indicator LEDs on the case will show the remaining charge level.
Checking Earbud Battery Level: When the earbuds are placed in the charging case without the charging cable connected, the case's LEDs will illuminate for about 3 seconds to display the remaining battery level of the earbuds.
Features
Ambient Mode
This feature allows you to hear surrounding sounds through the earbuds' microphones. Note: If wind blows on the earbuds while Ambient Mode is active, wind noise may be audible. This is not a product defect.
Gaming Mode
Enabling Gaming Mode reduces audio delay relative to video, improving synchronization. Note: Sound quality and Bluetooth stability may be reduced when Gaming Mode is active.
LED Display
| Status | LED Indication |
|---|---|
| Power ON | White light for 1 second |
| Charging | Orange light |
| Standby (Disconnected) | White light blinks twice every 3 seconds |
| Connected | White light blinks once every 7 seconds |
| Music Play/Call | No flash |
| Low Battery | Orange light blinks once every 3 seconds |
| Pairing Mode | White and orange lights blink alternately |
Button Operation
The earbuds feature touch-sensitive controls on the tap area.
| Action | Left (L) Earbud | Right (R) Earbud |
|---|---|---|
| Power ON/OFF | Long press 2 seconds | Long press 2 seconds |
| Music Play/Pause | Single tap | Single tap |
| Next Track | Long press 1 second | Long press 1 second |
| Previous Track | Long press 1 second | Long press 1 second |
| Volume Up | Double tap | Double tap |
| Volume Down | Double tap | Double tap |
| Answer Call | Single tap | Single tap |
| Hang Up Call | Long press 1 second | Long press 1 second |
| Reject Call | Long press 2 seconds | Long press 2 seconds |
| Ambient Mode ON/OFF | Triple tap | Triple tap |
| Gaming Mode ON/OFF | Triple tap | Triple tap |
| Voice Assistant (Siri/GA) | Long press 1 second (while music is paused) | Long press 1 second (while music is paused) |
| Pairing Mode | Triple tap (while disconnected) | Triple tap (while disconnected) |
Waterproof Performance
The earbuds are designed with IPX7 equivalent water resistance, allowing for use during workouts and in situations with sweat or light rain. However, the charging case is not waterproof. Ensure the earbuds are completely dry before placing them in the charging case. Do not submerge the earbuds in water.
Bluetooth Wireless
These earbuds utilize the 2.4GHz radio frequency band. Interference from other wireless devices operating in the same band may occur, potentially causing connection interruptions. This is not a product defect. To minimize interference, avoid using the earbuds in environments with high concentrations of 2.4GHz devices, such as crowded public spaces, areas with many Wi-Fi access points, or near radio frequency-emitting equipment.
Frequently Asked Questions (FAQs)
- Q: Suddenly I heard no sound from one earbud.
A: Please turn the earbud off and then on again. Alternatively, place the earbud in the charging case and remove it. - Q: The white LED lamp of the earphone is continuously blinking.
A: Place the earbud (the one not blinking continuously white) into the charging case, press and hold for about 10 seconds, then double tap and remove it from the case. Once the continuous white flashing of both earbuds stops, try pairing them with your phone again. - Q: Bluetooth connection has dropped.
A: Please delete "NUARL N6 mini2 SE" from your device's Bluetooth settings and re-pair the earbuds. - Q: The pairing between L and R earbuds has dropped.
A: Turn off both earbuds and then turn them on again. - Q: When I place the earbud in the case, it won't turn off itself. When I get the earbud out from the case it won't turn on.
A: The automatic power on/off function may not work if the charging case's battery is low. Please turn the earbuds on/off manually. - Q: I want to know about warranty and repair outside of Japan.
A: The warranty for this product is valid for one year from the date of purchase and is only valid in the country where the product was purchased. For specific repair inquiries, please contact the store where you purchased the product directly.
Specifications
| Feature | Specification |
|---|---|
| Driver | Φ6mm NUARL DRIVER[N6]v5 |
| Frequency Response | 20~20,000Hz |
| Power | Earbuds: 3.7V/50mAh Li-Po Battery Charging Case: 3.7V/400mAh Li-Po Battery |
| Continuous Play time (Max) | Approx. 8 hours (SBC/AAC) / 5.5 hours (aptX) |
| Total Play time (Max) | Approx. 32 hours (with Charging Case) |
| Charging Time (Min) | Approx. 1.5 hours |
| Bluetooth Specification | Version 5.2 / Class 2 / Multi-Pairing (4 devices) |
| Bluetooth Codec | aptX, AAC, SBC |
| Bluetooth Profile | A2DP, HFP, HSP, AVRCP |
| Bluetooth Passkey | 0000 |
| Microphone | cVc NC / Ambient sound combined use x 2 |
| Waterproof Level | IPX7 |
| Operation Temperature | 5~50°C (without condensation) |
| Accessories | Charging Case, Charging Cable, Ear pieces, User's Guide, Warranty Card |
| Certification | R210-162716 / FCC / CE / NCC |
After-Sales Service
For inquiries regarding after-sales service, please visit the NUARL official website at https://nuarl.com/contact/ or send an email to support@nuarl.com. Customer support is available Monday through Friday, from 10:00 to 17:30 (excluding weekends and public holidays).
Compliance Information
This device complies with Part 15 of the FCC Rules and relevant NCC regulations. Operation is subject to conditions that prevent harmful interference and ensure acceptance of received interference.
