Buy musical instruments online from the market leader – United States
User Manual for Millenium models including: 320824, BS-2010 Stand, BS-2010, Stand
Millenium BS-2010 – Thomann Nederland
Millenium BS-2010 – Thomann UK
File Info : application/pdf, 20 Pages, 147.81KB
DocumentDocumentUser Manual BS-2010 Stand Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 30.10.2023, ID: 320824 (V3) Table of contents Table of contents 1 General information................................................................................................................................. 5 1.1 Symbols and signal words............................................................................................................... 5 2 Safety instructions..................................................................................................................................... 7 3 Features.......................................................................................................................................................... 9 4 Operation.................................................................................................................................................... 10 5 Technical specifications....................................................................................................................... 14 6 Protecting the environment.............................................................................................................. 16 BS-2010 Stand 3 4 BS-2010 Stand General information 1 General information This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future refer- ence. Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document. Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document. BS-2010 Stand 5 General information Signal word DANGER! CAUTION! NOTICE! Warning signs Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in minor injury if it is not avoided. This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in material and environmental damage if it is not avoided. Type of danger Warning danger zone. 6 BS-2010 Stand Safety instructions 2 Safety instructions Intended use This speaker stand is used for stable fixing and height-adjustable installation of loudspeaker cabinets. Use the product only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. This product may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this product only if they are supervised or instructed by a person who is responsible for their safety. Safety DANGER! Risk of injury and choking hazard for children! Children can suffocate on packaging material and small parts. Children can injure themselves when handling the product. Never allow children to play with the packaging material and the product. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the product without supervision. Keep small parts away from children and make sure that the product does not shed any small parts that children could play with. CAUTION! Risk of injury due to tipping of the stand during loaded transport! If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage. Remove the installed devices before transporting the stand. BS-2010 Stand 7 Safety instructions CAUTION! Risk of injury due to tipping of stand on an unsuitable ground! When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid ground. CAUTION! Risk of injury due to tipping of the stand from excessive loading! In case of excessive loading, the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the stand. NOTICE! Possible staining due to plasticiser in rubber feet! The plasticiser contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the device's rubber feet and the floor. 8 BS-2010 Stand 3 Features Features Special characteristics: n Steel speaker stand n Extendible up to a height of about 2 m n Centric load capacity up to 30 kg n 25 mm pipe diameter at the pole mount n Including adapter from 25 mm diameter to M6 thread (12 mm long) n Foot diameter 1000 mm n Transport length when folded: 1.19 m BS-2010 Stand 9 Operation 4 Operation Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. CAUTION! Risk of injury due to tipping of the stand from excessive loading! In case of excessive loading, the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the stand. CAUTION! Risk of injury due to tipping of stand on an unsuitable ground! When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid ground. 10 BS-2010 Stand Operation CAUTION! Risk of injury due to tipping of the stand during loaded transport! If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage. Remove the installed devices before transporting the stand. Comply with regulations When installing and operating, make sure to follow the standards and regulations that apply in your country. BS-2010 Stand 11 Operation Setup Perform the steps described below: 1. Unfold the feet of the stand until the cross braces are in a horizontal position. 2. Fix this position with the safety screw on the carriage to which the three feet are attached. 3. Pull out the safety cotter and loosen the safety screw on the extension tube. 4. Pull out the extension tube to the desired height and slide the safety cotter through the corresponding grid hole. 5. Fix the position of the extension tube with the safety screw on the extension tube. 6. Flange the speaker box to the top of the extension tube. Use the adapter supplied with the stand if necessary. The weight of the speaker box to be set up must not exceed the maximum centric load of 30 kg. 12 BS-2010 Stand Disassembly Operation 1. Remove the speaker box. 2. Pull out the safety cotter and hold the extension tube while you loosen the safety screw on the extension tube. 3. Slide the extension tube all the way down and slide the safety cotter through the corre- sponding grid hole. 4. Fix the position of the extension tube with the safety screw on the extension tube. 5. Loosen the safety screw on the carriage to which the three feet are attached. 6. Fold up the feet of the stand. BS-2010 Stand 13 Technical specifications 5 Technical specifications Height, max. Adjustable stand height Footprint Stand tube diameter Mount type Load, max. (with centric load) Transport length when folded Weight Colour 2.00 m 1.19 m ... 2.00 m Æ 1.00 m Æ 25 mm Flange, Æ 25 mm Adapter, Æ 25 mm / M6 thread 30 kg 1.19 m 2.6 kg Black 14 BS-2010 Stand Further information Set of 2 stands Material Crank stand Ringlock Pneumatics Foot type No Steel No No No Tripod Technical specifications BS-2010 Stand 15 Protecting the environment 6 Protecting the environment Disposal of the packing material Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging. Observe the disposal note regarding documentation in France. 16 BS-2010 Stand Notes BS-2010 Stand 17 Notes 18 BS-2010 Stand Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de