C03 Selfie Stick User Manual
Thank you for your support!
Part Description
The C03 Selfie Stick includes the following components:
- Remote Control
- Detachable Phone Clip
- Phone Holder
- Tripod
- Stainless Steel Rod
- Adjustable Lock
Specifications
| Item | Details |
|---|---|
| Model | C03 |
| Main Material | ABS + Stainless Steel |
| Folded Length | 196mm |
| Extended Length | 1075mm |
| Product Size | 196x52x37mm |
| Product Weight | 162g |
| Battery | CR2032 (Replaceable) |
Battery Warning: The battery must not be exposed to sunlight, fire, or similar overheating environments.
Remote Control Instructions
Connecting the Remote Control
- Take out the remote control.
- First-time connection: Turn on the remote control; the indicator light will flash to enter pairing state. Search for "Selfie" with your phone to match. After successful pairing, the indicator light will turn off.
- Automatic connection: Turning on the remote control automatically connects the paired phone.
Using the Remote Control
- Power Key: Push up to turn on, push down to turn off.
- Button: Click to shoot photo/video.
Standby Mode: In the unconnected state, if there is no operation for 5 minutes, the remote control will automatically shut down. (Repeatedly toggle the power key to turn on).
Phone Holder and Tripod Usage
Installing the Phone
- Open the phone clip.
- Use the phone to push the clip to clamp the phone.
- Turn the phone selection to vertical screen and remove it upwards.
Using the Tripod
The selfie stick can be used with its integrated tripod for stable positioning.
Adjusting the Selfie Stick
The selfie stick features an adjustable lock and a 360° rotation capability for optimal angle adjustment. The stainless steel rod extends to the maximum length.
Remote Control Compatibility and Settings
Remote control compatibility:
- Android 4.4 or above
- iOS 5.1 or above
Android devices settings:
If you change your "volume key function" in the camera settings, please change it back to the "default value" or "Shooting" for the remote control to work correctly.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
