mailto:info@infobitav.com
Pro Audio Video ManufacturerPro Audio Video Manufacturer
User Manual for infobit models including: 409R, iWall 4K UHD 4x9 Video Wall Controller
www.infobitav.com info@infobitav.com Overview The iWall 409R is a 4K Ultra HD video wall controller designed by INFO IT AV. Supports 4x HDMI inputs (1x 4K@60Hz, 3x 4K@30Hz), 1x DP input (4K@60Hz), 9x HDMI outputs
Купить Infobit iWall 409R недорого, отзывы, фотографии, характеристики, низкие цены в интернет магазине БигТВ с доставкой по городу Москва
File Info : application/pdf, 19 Pages, 1.19MB
DocumentDocumentiWall 4K UHD 4x9 Video Wall Controller Model: 409R www.infobitav.com info@infobitav.com 2021V1.1 Catalog Product Overview................................................................................................................ 1.1 Product features.......................................................................................................... 1.2 Application scenarios .................................................................................................. Specifications ........................................................................................................................ Operation instructions.......................................................................................................... 1.1 Product panel description ........................................................................................... 1.2 Remote control function description .......................................................................... 1.3 Product connection diagram....................................................................................... 1.4 Definition of rows and columns .................................................................................. 1.5 Supported resolution .................................................................................................. Common problem................................................................................................................. Appendix ............................................................................................................................... 1.1 Appendix 1: Arrangement of output interface ........................................................... www.infobitav.com info@infobitav.com Overview The iWall 409R is a 4K Ultra HD video wall controller designed by INFOBIT AV. Supports 4x HDMI inputs (1x 4K@60Hz, 3x 4K@30Hz), 1x DP input (4K@60Hz), 9x HDMI outputs (1080p@60Hz), and 1x DP loop out. A single device, 5 inputs and 9 outputs (compatible with 1 in 9 out), can be combined in any number of video wall layout modes of landscape or portrait installation, and large-scale video wall can be connected by cascading more 409R. It supports 4 source windows on the whole wall in multiple displaying modes: single image, PIP (Picture in Picture), POP (Picture on Picture), PYP ( Picture by Picture: Up-Down or Left-Right side by side) or Quad-view. It supports maximum input 3840x2160@60Hz and backwards compatible and maximum output 1920x1080@60Hz. The source can be rotated 90°(only in single picture mode), and the upper image rotated 180°(only under picture by picture side by side by up-down mode). No stretching, deformation, or compression. Supports matrix model (single display mode 1x1). Support IR remote control and serial RS232 control. Fan-less design: Low power consumption fan-less design. Inputs can be PC, media player, blue ray, game console and other devices. Using 40nm high-end programmable FPGA chip, pure hardware real-time processing architecture without delay. Without Window blue screen, virus risks, OS vulnerability, and breakdown. Lower requirements of IT technology background, save your training cost. Application It is mainly used in industrial applications such as ultra-high-definition video surveillance, large-scale video walls, advertising, exhibitions, conference, and digital signage. www.infobitav.com info@infobitav.com Specifications Product name Input Max. pixel FPS DisplayPort input HDMI inputs Output Max. Pixel FPS HDMI outputs Loop-out Audio output Control Factory default resolution Support custom resolution Operating temperature Power consumption Power supply Net Weight Size Package list Warranty iWall 409R 600MHz 1x Display port 1.2 (3840x2160@60Hz) 3x HDMI 1.4 (3840x2160@30H)- HDMI IN 1-3 1x HDMI 2.0 (3840x2160@60H)- HDMI IN 4 165MHz 9x HDMI 1.3 (1920*1080@60Hz) 1x Display port 1.2 (3840x2160@60Hz) 1x 3.5mm Remote control, RS232 HDMI3840*2160@30Hz DP3840*2160@60Hz Yes 0-50 12W 12V@2A AC-DC 840g 270*122.5*20mm WDH One DP Cable One 12V@2A AC-DC One remote control 3 years www.infobitav.com info@infobitav.com Operation instructions Product panel description 409R front panel A: RS232 loop out, used to loop out the RS232 commands to the next cascaded device. BTCP/IP control CRS232 control DDIP switch (Board ID): indicates the ID of the current device in cascading mode. For detailed settings, see below DIP list. EIR control F, G, H and I: HDMI inputs 1-4, of which I (#4) port supports 4K60, F/G/H port (#1-3) supports 4K30. With LED indicators showing input status. J: 1 DP input interface, maximum 4K60Hz. K: Audio output L: DP Loop-out for cascading (In single picture mode, the loop-out follows the selection of the input source channel. In other modes, only the DP input source can be loop-out). www.infobitav.com info@infobitav.com 409R rear panel O, P, Q, R, S, T, U, VW: HDMI outputs 1-9 M: Switch ON/OFF N: Power supply. List 1: DIP switch (When cascading, it indicates the current device ID, set in binary.) Device # Device 1 Device 2 Device 3 Device 4 Device 5 Device 6 Device 7 Device 8 ID 1000 0100 1100 0010 1010 0110 1110 0001 Device # Device 9 Device 10 Device 11 Device 12 Device 13 Device 14 Device 15 ID 1001 0101 1101 0011 1011 0111 1111 www.infobitav.com info@infobitav.com 1.1 Remote control Buttons Ent Esc Row Col Src Remote control panel Features Confirm key Escape key Set layouts mode: row (range: 1-16) Set layouts mode: column (range: 1-16) SourceEnter the number of the source, 1 for HDMI #1, 2 for HDMI #2, 3 for HDMI #3, 4 for HDMI #4, 5 for DP IN #5. www.infobitav.com info@infobitav.com Win + - zoom 2x2 3x3 1x3 3x1 WindowThe number of each video window. See below details following this list. Used with zoom, adjust the size of small window in PIP mode, range (0-10). Used with zoom, adjust the size of small window in PIP mode, range (0-10). Move source window left-right or up-down. Or zoom in/out the window. 4 displays, 2 rows and 2 columns 9 displays, 3 rows and 3 columns 3 displays, 1 row and 3 columns 3 displays, 3 rows and 1 column Quad view: AABB (A for HDMI, B for DP) By "Win + Scr" to select source for each window. Picture by Picture: Left- Right or Up- Down: AB (A for HDMI, B for DP) By "Win + Scr" to select source for each window. Single picture: A - > B (A for HDMI, B for DP) R90 R180 Clone By "Win + Scr" to select source for each window. Rotate the whole input image 90° (only in single image model) The upper image rotated 180° (only in Up-Down PYP model) Clone mode: Duplicate source (1x1) for each output port Note 1: [win] key meaning: image window, the number of each screen (window) on the whole video wall, the corresponding position is as follows. Single screen mode: there is only one image, and the value is fixed as No. A, as shown below. www.infobitav.com info@infobitav.com A Picture in Picture mode: The value of the large picture is No. A, and the value of the small picture is No. B, as shown in the following figure. A B Picture by Picture (Left right mode): The left screen value is No. A, and the right screen value is No. B, as shown below. A B Picture by Picture (Up down mode): The upper screen value is No. A, and the lower screen value is No. B, as shown below. A B Quad view mode:The value of the upper left screen is No. A, the value of the bottom left screen is No. B, the value of the upper right screen is No. C, and the value of the bottom right screen is No. D, as shown in the following figure. A C B D Remote control operation instructions The adjustment of the following two groups of parameters needs to press the [Ent] confirmation key to take effect, and the [Esc] key to cancel. [ROW, COL] is a group to adjust the output layouts mode. You can confirm the value by viewing the OSD display information in the top left corner of the whole wall. For example: If you need to adjust to 2x3 (two rows and three columns) video wall, you need to set [row] to 2, and [COL] to 3. Press [Ent] to confirm. www.infobitav.com info@infobitav.com [Src, Win] is a group. The purpose is to arbitrarily specify the input source channel for each image window. You can confirm the value by viewing the OSD display information in the top left corner of the whole video wall. For example: Currently, it is in [ ] PIP mode, HDMI #1 is displayed in the larger window and HDMI #2 is displayed in the smaller window by default. If you need to adjust the large window to show HDMI #2 and the small window to show HDMI #1. Then you need to set [Win] to "1"(window No. 1 means larger window), [Src] is "2" (2 means HDMI#2 input)After pressing the [Ent] to confirm the selection. Do the same operation for the smaller window. +-are one group, used to adjust position and size of the smaller image window when under Picture in Picture mode. Press Zoom at the first time, press + - buttons to adjust the position ( + to move to right, - to move to left) Press at the second time, press + - buttons to adjust the position ( + to move down, - to move up) Press at the third time, press + - buttons to adjust the size ( + to zoom out, - to zoom in) RS232 control Baud Rate: 9600 Data bit: 8 bits Stop bit: 1 bit, no parity Function Video wall mode Byte 1 cmd_head 0x66 Byte 2 cmd_type 0x01 Byte 3 Byte 4 Byte 5 cmd_data1 cmd_data2 Check_sum Row Col byte 1 + byte 2 www.infobitav.com info@infobitav.com Rotate 90 ° 0x66 Rotate 180 ° 0x66 Multi pictures mode 0x66 Multi pictures window specify input 0x66 source PIP Small window position 0x66 PIP Small window size 0x66 + byte 3 + byte 4 byte 1 + byte 0x02 Rotate9 0 0x00 2 + byte 3 + byte 4 byte 1 + byte 0x03 Rotate1 80 0x00 2 + byte 3 + byte 4 byte 1 + byte 0x04 Mode 0x00 2 + byte 3 + byte 4 byte 1 + byte 0x05 Window Source 2 Sel Channel + byte 3 + byte 4 byte 1 + byte 0x06 Position 0x00 2 + byte 3 + byte 4 byte 1 + byte 0x07 Size 0x00 2 + byte 3 + byte 4 www.infobitav.com info@infobitav.com Description: [Row]: Video Wall mode: Row [Col]: Video Wall mode: Column [Rotate90]: Rotate 90°: 0: rotate 1: do not rotate (only supported in single-screen mode) [Rotate180]: Rotate 180°: 0: rotate, 1: not rotate (only supported in stitching mode behavior 2) [Mode]: Multi-picture mode: 0: single screen 1: left-right PYP 2: four pictures quad-view 3: PIP double screen 4: up-down PYP [WindowSel]: Window selection, the value depends on the setting of multi-screen mode: [Mode]=0, WindowSel=0 (current screen) [Mode]=1, WindowSel=0 (left picture), WindowSel=1 (right picture) [Mode]=2, WindowSel=0 (upper left screen), WindowSel=1 (lower left screen) WindowSel=2 (upper right screen), WindowSel=3 (lower right screen) [Mode]=3, WindowSel=0 (large picture), WindowSel=1 (small picture) [Mode]=4, WindowSel=0 (upper screen), WindowSel=1 (lower screen) [SourceChannel]: Input source channel selection: 0 is HDM I, 1 is HDMI 2, 2 is HDMI 3, 3 is HDMI 4, 4 is DP 5. [Position]: Choose the position of the small window in the picture-in-picture mode: 0: center, 1: upper left corner, 2: upper right corner, 3: bottom left corner, 4: Bottom right corner (only supported in PIP double screen mode) [Size]: Choose the size of the small window in the picture-in-picture mode: 0~10, the larger the value, the larger the window supported in PIP double screen mode). www.infobitav.com info@infobitav.com Diagram 3x3 video wall 3x6 Video Wall When cascading, the board ID of the 1/2 devices needs to be set: www.infobitav.com info@infobitav.com Note: When the devices are cascaded, the image rank (MxN rank) must be the same. 3x9 Video Wall When cascading, the board ID of the 1 / 2 / 3 devices needs to be set: www.infobitav.com info@infobitav.com Note: The device cascade setting image (NxM image) must be the same. Definition of row and column mode: Supported resolution Mode Full screen input resolution Full screen output resolution Single screen resolution 1x2 3840x1080@30Hz 3840x1080@60HZ 1920x1080@60HZ www.infobitav.com info@infobitav.com 1x3 3840x720@30HZ 5760x1080@60HZ 1920x1080@60HZ 1x4 4096x576@30HZ 7680x1080@60HZ 1920x1080@60HZ 1x5 4080x459@30HZ 9600x1080@30HZ 1920x1080@60HZ 1x6 4032x378@30HZ 11520x1080@60HZ 1920x1080@60HZ 1x7 4032x324@30HZ 13440x1080@60HZ 1920x1080@60HZ 1x8 3968x279@30HZ 15360x1080@60HZ 1920x1080@60HZ 1x9 4032x252@30HZ 17280x1080@60HZ 1920x1080@60HZ 9x1 784x3969@30HZ 1920x9720@60HZ 1920x1080@60HZ 8x1 888x3996@30HZ 1920x8640@60HZ 1920x1080@60HZ 7x1 992x3906@30HZ 1920x7560@60HZ 1920x1080@60HZ 6x1 1184x3996@30HZ 1920x6480@60HZ 1920x1080@60HZ 5x1 1408x3960@30HZ 1920x5400@60HZ 1920x1080@60HZ 4x1 1776x3996@30HZ 1920x4320@60HZ 1920x1080@60HZ 3x1 1920x3240@30HZ 1920x3240@60HZ 1920x1080@60HZ 2x1 1920x2160@30HZ 1920x2160@60HZ 1920x1080@60HZ www.infobitav.com info@infobitav.com 2x2 3840x2160@30HZ 3840x2160@60HZ 1920x1080@60HZ 2x3 3840x1440@30HZ 5760x2160@60HZ 1920x1080@60HZ 2x4 4096x1152@30HZ 7680x2160@60HZ 1920x1080@60HZ 3x2 2816x2376@30HZ 3840x3240@60HZ 1920x1080@60HZ 3x3 3840x2160@30HZ 5760x3240@60HZ 1920x1080@60HZ 4x2 2688x3024@30HZ 3840x4320@60HZ 1920x1080@60HZ Table 2 iWall 409R Cascade Mode Supported Resolution Mode 5x2 6x2 7x2 8x2 9x2 2x5 2x6 2x7 2x8 2x9 3x4 3x5 3x6 3x7 3x8 Full screen input resolution 2336x3285@30HZ 1920x3240@30HZ 2016x3969@30HZ 1776x3996@30HZ 1568x3969@30HZ 4080x918@30HZ 4080x765@30HZ 4088x657@30HZ 4096x576@30HZ 4032x504@30HZ 4096x1728@30HZ 4080x1377@30HZ 4032x1134@30HZ 4032x972@30HZ 4096x864@30HZ Full screen output resolution 3840x5400@60HZ 3840x6480@60HZ 3840x7560@60HZ 3840x8640@60HZ 3840x9720@60HZ 9600x2160@60HZ 11520x2160@60HZ 13440x2160@60HZ 15360x2160@60HZ 17280x2160@60HZ 7680x3240@60HZ 9600x3240@60HZ 11520x3240@60HZ 13440x3240@60HZ 15360x3240@60HZ Single screen resolution 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ 1920x1080@60HZ www.infobitav.com info@infobitav.com 3x9 4032x756@30HZ 17280x3240@60HZ 1920x1080@60HZ 6x3 2640x2970@30HZ 5760x6480@60HZ 1920x1080@60HZ 7x3 2112x2772@30HZ 5760x7560@60HZ 1920x1080@60HZ 8x3 2160x3240@30HZ 5760x8640@60HZ 1920x1080@60HZ 9x3 1728x2916@30HZ 5760x9720@60HZ 1920x1080@60HZ 4x4 4096x2304@30HZ 7680x4320@60HZ 1920x1080@60HZ 4x5 4080x1836@30HZ 9600x4320@60HZ 1920x1080@60HZ 4x6 4032x1512@30HZ 11520x4320@60HZ 1920x1080@60HZ 5x5 4080x2295@30HZ 9600x5400@60HZ 1920x1080@60HZ 2x11 4048x414@30HZ 21120x2160@60HZ 1920x1080@60HZ 2x12 4032x378@30HZ 23040x2160@60HZ 1920x1080@60HZ 2x13 3952x342@30HZ 24960x2160@60HZ 1920x1080@60HZ Common problem (1) What is the output resolution of the loop-out interface? Answer: Same as the DisplayPort input resolution of the first device. (2) Sometimes the dial code or remote control switch does not respond? Answer: Because it involves resolution switching, it takes a certain time (1s). If the display does not meet the expectations, it can be restored by power off again. (3) Is there a flash line on screen in cascade mode? Answer: Please use the DP cable provided by the manufacturer to connect the cascaded DP ports. (4) There are errors in remote control when cascading: some devices respond to remote control commands normally, and some devices do not respond to remote control commands? Answer: It is recommended to put the equipment together when using remote control in cascade. (5) How to recover when an error occurs? Press the [clone] key, press the [ ] key, Return to [output copy mode, input single picture] status, when the cascade device settings are synchronized, continue with other settings. www.infobitav.com info@infobitav.com Appendix: Outputs order (1) When the image is not rotated: the outputs order is from up then down, then from left to right. As shown in the following 2x4 (Row*Col) mode: see below (2) When the content is rotated 90 (anticlockwise): The outputs order is from right to left and then from up to down. As shown in Figure 4x2 mode (Row*Col). see right Note*: Please make sure your display direction right the same as the picture shown. The content is rotated by 90 (anticlockwise), and the video wall is installed by 90 clockwise. The "Samsung"logo on the picture is showing the right display direction. www.infobitav.com info@infobitav.com