Instruction Manual for TREND models including: TT80076 Table Lamp, TT80076, TT80076 Lamp, Table Lamp, Lamp
TT80076 INSTALLATION INSTRUCTIONS Please read carefully and save these instructions, as you may need them at a later date. CAUTION WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors. Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. GENERAL All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. ASSEMBLY AND INSTALLATION 1. Raise the harp caps on harp (04) and insert the bottom ends of harp (04) into saddle (05). 2. Lower the harp caps on harp (04) until they cover the two-pronged saddle (05). 3. Unscrew the finial (01) from the top of harp (04). 4. Place shade (03) over the harp (04) making sure the harp top extends through the top ring of shade (03), and secure shade (03) with top cap (02) and finial (01). 5. Install bulb (not included). DO NOT EXCEED WATTAGE RECOMMENDED ON SOCKETS INSTALLATION IS NOW COMPLETE 01. FINIAL 02. TOP CAP 03. SHADE 04. HARP 05. SADDLEMicrosoft PowerPoint 2010 Microsoft PowerPoint 2010