Bosch FDP 0001 A Dummy Cover Plate

Product Overview

The Bosch FDP 0001 A is a dummy cover plate designed for use with various Bosch security system enclosures. It serves to cover unused openings or modules within the enclosure, providing a finished and professional appearance.

Compatible Enclosures and Systems

This dummy cover plate is compatible with or shown in conjunction with the following Bosch enclosure models:

• CPH 0006 A
• MPH 0010 A
• EPH 0012 A
• HCP 0006 A
• HBC 0010 A
• HBE 0012 A

Installation Instructions

The following steps detail the installation process for the FDP 0001 A dummy cover plate:

1. Preparation: A large panel with multiple rectangular openings is shown. The FDP 0001 A dummy cover plate is presented as a separate component to be fitted into one of these openings.
2. Insertion: Align the dummy cover plate with an available opening on the panel.
3. Securing: Insert the plate into the opening. A hand is shown pushing the plate, and a curved arrow indicates a locking or snapping action, suggesting the plate engages with the panel's mounting points.
4. Final Fastening: Once the plate is seated, a screwdriver is used. An arrow shows the screwdriver being inserted into a slot on the front of the dummy cover plate, indicating a turning motion to fully secure the plate in place.

Note: Diagrams illustrate the physical insertion and securing mechanism. Ensure the plate is firmly attached after installation.

Manufacturer Information

Bosch Sicherheitssysteme GmbH
Robert-Koch-Strasse 100
D-85521 Ottobrunn
Germany
Telefon: +49 (0)89 6290-0
Telefax: +49 (0)89 6290-1020
Website: www.boschsecurity.com

© Bosch Sicherheitssysteme GmbH, 2009