SATECHI Vegan-Leather FindAll™ Keychain

Functions

The FindAll™ Keychain has several key functions:

1. LED Indicator

Provides visual feedback on the device's status.

2. On/Off Button

Used to power the device on, off, or perform a factory reset.

3. Wireless Charging

Supports charging via MagSafe, Qi, or Qi2 wireless chargers.

Power On / Off / Reset

[Finger pressing button]

Power On

Press the power button once to turn on the FindAll™ Keychain. You will hear a confirmation sound.

Power Off

Quick-press the power button twice, then long-press the third time for at least 5 seconds. You will hear two beeps, indicating the device is powered off. (When powered off, location cannot be found or viewed).

If the FindAll™ Keychain is not paired within 10 minutes, it will emit a beep and power off automatically. Power it on again to continue pairing.

Factory Reset

Quick-press the power button 4 times, then long-press the fifth time for at least 3 seconds. You will hear a confirmation sound indicating the factory reset is complete.

Pairing

1. Ensure your iPhone is set up and your FindAll™ Keychain is powered on.
2. Open the Apple Find My app.
3. In the Items tab, tap Add New Item.
4. Tap Other Supported Item (your iPhone will search for your FindAll™ Keychain).
5. Once "Satechi FindAll™ Keychain" is detected, tap Connect.
6. Follow the onscreen steps to name it and register it to your Apple ID.
7. Ensure your FindAll™ Keychain appears in Items. If not, remove the item and perform a factory reset on the FindAll™ Keychain (see "Factory Reset" above), then reconnect.

* Do not leave the Apple Find My app while pairing the FindAll™ Keychain.

Charging

[Wireless charging symbol]

Charge your FindAll™ Keychain with a MagSafe, Qi, or Qi2 wireless charger. Note: Wireless charger not included.

LED Indicators

Orange - Charging

Green - Fully charged

Battery

Battery life up to 12 months* on a single charge. It is recommended to fully charge your FindAll™ Keychain once every 8 months. *May depend on device usage.

Safety Warnings

1. Do not expose the device to temperatures below -10°C (14°F) or above 35°C (95°F).
2. Do not expose the device to an open flame or submerge it in water, as this may damage the device.
3. Always check the device, cables, or other accessories for damage before use. If damaged, do not use the device.
4. Do not attempt to disassemble, modify, or damage the device with sharp objects, as this may cause serious damage and void the warranty.
5. Do not expose the device to corrosive liquids or high humidity, as this may seriously damage the device and void the warranty.

Important Information

1. Only compatible with iOS, iPadOS, and macOS.
2. Compatible with Qi, Qi2, and MagSafe wireless chargers.
3. The FindAll™ Keychain does not contain magnets – it will not attach to wireless chargers.
4. Connection Range: 10-20 m indoors, 20-50 m outdoors.

Support

To access the Quick Guide, technical support, and frequently asked questions, scan the QR code or visit www.satechi.net/support.