TROTEC TTK S SERIES
PROFESSIONAL CONDENSATION DEHUMIDIFIERS
Humidity Control for Water Damage Restoration, Continuous Drying Applications and Construction Sites
Introduction
The TROTEC TTK S series offers professional condensation dehumidifiers designed for humidity control in water damage restoration, continuous drying applications, and construction sites. These mobile dehumidifiers are durable and budget-friendly, ideal for demanding environments. They ensure effective moisture control even at low temperatures, built with high-quality materials for long service life. Integrated handles and rubber wheels facilitate easy transport. The series utilizes eco-conscious refrigerants and advanced heat pump technology for optimized performance, reduced energy consumption, and a minimized carbon footprint.
Applications
- Construction sites: Dry new buildings or renovation and restoration projects.
- Water damage restoration: Remove moisture after floods, pipe bursts, and other water-related incidents.
- Continuous drying projects: Prevent mould and moisture damage in damp spaces continually.
Model Comparison
Select the right model for your needs:
| Specifications | Units | TTK 140 S | TTK 170 S | TTK 350 S | TTK 650 S |
|---|---|---|---|---|---|
| Dehumidification capacity | l/24h | 28.5 | 35.5 | 63.5 | 88 |
| Air flow | m³/h | 580 | 580 | 490 | 925 |
| Water tank | Litres | 6 | 6 | 6 | No tank |
| Operating range | °C / % RH | 5-32 / 35-95 | 5-32 / 35-95 | 5-32 / 35-95 | 5-32 / 35-95 |
| Max. power consumption | kW | 0.6 | 0.6 | 1.4 | 2.1 |
| Sound level | dB(A) | 52 | 52 | 54 | 56 |
| Weight | kg | 27.5 | 32 | 39 | 52 |
| Refrigerant type/amount | - | R290 / 150g | R290 / 150g | R454C / 650g | R454C / 1,050g |
TTK 140 S
The TTK 140 S is a compact and budget-friendly dehumidifier that combines robust construction with high performance. It is ideal for maintaining dry conditions in both heated and unheated spaces, such as living areas, storage rooms, and workshops.
Key Features
- Hot gas defrosting for efficient operation at low temperatures.
- Environmentally friendly refrigerant (R290).
- Ideal for maintaining dry conditions in storage rooms, workshops, and living areas.
- Made from high-quality materials, ensuring long service life and reliability.
- Integrated recessed handles and rubber wheels for easy transport and handling.
- Advanced heat pump technology for optimised performance.
- Condensate drain for continuous drying.
- Automatic switch-off for convenience and safety.
- Suitable for a wide range of applications, from building drying to water damage restoration.
- Other options on request.
Specifications
| Dehumidification capacity* | 1/24h | 28.5 |
| Specific energy consumption (SEC)* | kWh/l | 0.45 |
| Air flow | m³/h | 580 |
| Operating temperature range | °C | 5-32 |
| Operating humidity range | % RH | 35-95 |
| Max. power consumption | kW | 0.6 |
| Power supply | V/Hz | 230/50 |
| Sound level | dB(A) | 52 |
| Condensate tank | l | 6 |
| Power cord | m | 1.6 |
| Refrigerant type/amount | g | R290/150 |
| Product size (h x w x d) | mm | 605 x 400 x 400 |
| Weight | kg | 27.5 |
* 30°C/80% RH
Optional Accessories
External condensate pump - 6.100.003.020
Air filter (filter fleece) - 7.710.000.332
TTK 170 S
The TTK 170 S is a versatile dehumidifier suitable for a wide range of applications, including water damage restoration, new building drying, and maintaining dry conditions in large spaces. Its robust design and high dehumidification capacity make it a reliable choice for demanding environments.
Key Features
- Robust construction for durability in demanding environments.
- Carriage design with bar handle and large wheels for easy transport.
- Hot gas defrosting for efficient operation at low temperatures.
- Environmentally friendly refrigerant (R290).
- Suitable for water damage restoration and new building drying.
- Built using high-quality materials for long-term reliability.
- Advanced heat pump technology for optimised performance.
- Condensate drain for continuous drying.
- Automatic switch-off for convenience and safety.
- Ideal for a wide range of applications, including large spaces and demanding environments.
- Other options on request.
Specifications
| Dehumidification capacity* | 1/24h | 35.5 |
| Specific energy consumption (SEC)* | kWh/l | 0.4 |
| Air flow | m³/h | 580 |
| Operating temperature range | °C | 5-32 |
| Operating humidity range | % RH | 35-95 |
| Max. power consumption | kW | 0.6 |
| Power supply | V/Hz | 230/50 |
| Sound level | dB(A) | 52 |
| Condensate tank | l | 6 |
| Power cord | m | 3 |
| Refrigerant type/amount | g | R290/150 |
| Product size (h x w x d) | mm | 963 x 490 x 500 |
| Weight | kg | 32 |
* 30°C/80% RH
Optional Accessories
External condensate pump - 6.100.003.020
Air filter (filter fleece) - 7.710.000.332
TTK 350 S
The TTK 350 S is a high-performance dehumidifier designed for large-scale drying applications. Its robust construction and advanced features make it ideal for use in construction sites, water damage restoration, and other demanding environments. While the sturdy and compact unit weighs out at just 39kg, it has been fitted with leading heat pump technology to reduce energy consumption.
Key Features
- Robust construction for durability in demanding environments.
- Carriage design with bar handle and large wheels for easy transport.
- Hot gas defrosting for efficient operation at low temperatures.
- Environmentally friendly refrigerant (R454C).
- Ideal for large-scale drying applications, such as construction sites and water damage restoration.
- Built using high-quality materials for long-lasting performance.
- Advanced heat pump technology for optimised performance.
- Condensate drain for continuous drying.
- Automatic switch-off for convenience and safety.
- Suitable for a wide range of demanding environments.
- Other options on request.
Specifications
| Dehumidification capacity* | 1/24h | 63.5 |
| Specific energy consumption (SEC)* | kWh/l | 0.45 |
| Air flow | m³/h | 490 |
| Operating temperature range | °C | 5-32 |
| Operating humidity range | % RH | 35-95 |
| Max. power consumption | kW | 1.4 |
| Power supply | V/Hz | 230/50 |
| Sound level | dB(A) | 54 |
| Condensate tank | l | 6 |
| Power cord | m | 3 |
| Refrigerant type/amount | g | R454C/650 |
| Product size (h x w x d) | mm | 965 x 500 x 530 |
| Weight | kg | 39 |
* 30°C/80% RH
Optional Accessories
External condensate pump - 6.100.003.020
Air filter (filter fleece) - 7.710.000.334
TTK 650 S
The TTK 650 S is a powerful dehumidifier designed for the most demanding drying tasks. Its high dehumidification capacity and robust construction make it suitable for large-scale applications, such as construction sites and water damage restoration. The durable TTK 650 S weighs 52 kg and is capable of removing 88 litres of moisture per day. It has been fitted with leading heat pump technology to reduce energy consumption.
Key Features
- Robust construction for durability in demanding environments.
- Carriage design with bar handle and large wheels for easy transport.
- Hot gas defrosting for efficient operation at low temperatures.
- Environmentally friendly refrigerant (R454C).
- Suitable for large-scale drying tasks, such as construction sites and water damage restoration.
- Built using high-quality materials for long-term reliability.
- Advanced heat pump technology for optimised performance.
- Condensate drain for continuous drying.
- Automatic switch-off for convenience and safety.
- Ideal for a wide range of demanding applications.
- Other options on request.
Specifications
| Dehumidification capacity* | 1/24h | 88 |
| Specific energy consumption (SEC)* | kWh/l | 0.5 |
| Air flow | m³/h | 925 |
| Operating temperature range | °C | 5-32 |
| Operating humidity range | % RH | 35-95 |
| Max. power consumption | kW | 2.1 |
| Power supply | V/Hz | 230/50 |
| Sound level | dB(A) | 56 |
| Condensate tank | l | TTK 650 S has no tank |
| Power cord | m | 3 |
| Refrigerant type/amount | g | R454C/1,050 |
| Product size (h x w x d) | mm | 1,022 x 511 x 616 |
| Weight | kg | 52 |
* 30°C/80% RH
Optional Accessories
External condensate pump - 6.100.003.020
Air filter (filter fleece) - 7.710.000.335
Contact and Global Presence
TROTEC is part of the DANTHERMGROUP. Find your local contact:
| Country | Company | Address | Phone | |
|---|---|---|---|---|
| Denmark | Dantherm Denmark A/S | DK-7800 Skive | +45 96 14 37 00 | sales.dk@danthermgroup.com |
| Germany | Trotec GmbH | 52525 Heinsberg | +49 2452 962-0 | vertrieb.de@danthermgroup.com |
| Germany | 22844 Norderstedt | +49 40 526 8790 | sales.de@danthermgroup.com | |
| France | Dantherm Group SAS | 69694 Vénissieux Cedex | +33 4 78 47 11 11 | sales.fr@danthermgroup.com |
| France | 67850 Herrlisheim | +33 3 90 29 48 18 | sales.fr@danthermgroup.com | |
| Spain | Dantherm Group SP SAU | 28108 Alcobendas, Madrid | +34 91 661 45 00 | sales.es@danthermgroup.com |
| Spain | 46980 Paterna, Valencia | +34 961 524 866 | sales.es@danthermgroup.com | |
| United Kingdom | Dantherm Group Ltd | Maldon CM9 4XD | +44 (0)1621 856611 | sales.uk@danthermgroup.com |
| Italy | Dantherm Group S.p.A. | 37010 Pastrengo (VR) | +39 045 6770533 | sales.it@danthermgroup.com |
| Poland | Dantherm Group Sp. z o.o. | 62-023 Gądki | +48 61 65 44 000 | sales.pl@danthermgroup.com |
| Norway | Dantherm Group AS | 3138 Skallestad | +47 33 35 16 00 | sales.no@danthermgroup.com |
| Sweden | Dantherm Group AB | 602 13 Norrköping | +46 (0)11 19 30 40 | sales.se@danthermgroup.com |
| Switzerland | Dantherm Group AG | CH-5405 Baden Dättwil | +41 43 500 00 50 | sales.ch@danthermgroup.com |
Keep Updated
Follow TROTEC and DANTHERMGROUP on:
- YouTube
Visit our website: danthermgroup.com
Dantherm Group - Commercial Climate Solutions and Systems
