Nitho Nexus Wireless Controller

Quick Start Guide

Specifications

Thank you for purchasing the Nitho Nexus. Here are its specifications:

Full compatibility with Switch®, PC, iOS®, and Android®.
Equipped with the latest motion sensor technology.
Built-in six-axis gyroscope and six-axis accelerator detect omnidirectional dynamic information including Roll, Pitch, and Yaw.
Multiple selectable RGB light effects in eight different colors.
High performance Hall effect triggers.
Three turbo speed adjustments.
Four motor vibration intensity adjustments with memory function.
Central LEDs display charging status and battery level.
Automatic controller wake-up and device reconnection.

Features

Buttons List

T (Turbo), HOME, A, B, X, Y, L, ZL, R, ZR, L3, R3, ^ (Up), v (Down), < (Left), > (Right), Screenshot, Select.

Compatibility

Supports Switch® console, Android®, iOS® (above 13.0), and PC (Windows® 10 and above) D-Input protocol wirelessly, and D-Input + X-Input protocols when wired.

Connection

The NEXUS maintains a connection up to 6 meters away from the main device.

Controller Layout

A diagram of the Nitho Nexus controller shows the layout of buttons, joysticks, and triggers. Labels point to: Screenshot button, Select button, Start button, HOME button, T (Turbo) button, A, B, X, Y buttons, D-pad (+), Left Stick (L3), Right Stick (R3), and Turbo button.

Connection Setup

Wired Connection Setup

For Nintendo Switch®

While the controller is off, connect the USB data cable directly to the Switch console's USB port.
The controller will automatically reconnect to the console via Bluetooth wireless mode after unplugging the USB cable.

Note: Ensure the wired controller connection option is enabled in the Console Settings.

For PC

Connect the USB data cable to the NEXUS controller and the PC.

Enter X-Input mode (default); LED1+LED4 will be lit.

Press and hold the "-" and "+" buttons for 3 seconds to enter D-Input mode; LED2+LED3 will be lit.

Wireless Connection Setup

For Console (Nintendo Switch®)

Turn on Bluetooth function:
1. Enable Bluetooth on the Switch® Console.
2. Turn on the Switch® console and navigate to the "System Settings" Menu, then click the "Airplane Mode" option.
3. Select "Controller Connection (Bluetooth)" to turn on Bluetooth function.
Pairing Controller:
1. Click the controller menu button on the console to match the controller: "Controllers" > "Change Grip/Order".
2. Press the "Y" and "HOME" buttons or hold the "Pairing button" for 3 seconds to enter Bluetooth pairing mode.
3. Once paired successfully, LED1-LED4 will flash rapidly.

Note: Synchronizing states or pairing with the Console: LED1-LED4 light flashes quickly.

Switch Pairing Interface

Screenshots of the Nintendo Switch console interface for controller pairing. One shows the 'Controllers' menu with options like 'Change Grip/Order' and 'Pairing New Controllers'. Another shows a screen indicating two players are supported, with controller slots numbered 1 to 4.

For PC, iOS®, & Android®

On Standard Android® Mode

Press the "A" + "HOME" button for pairing mode; LED2+LED3 will flash quickly.

Click "GamePad" device name on your Android device to pair. LED2+LED3 light will stop blinking after successful pairing.

On Bluetooth iOS®/PC and Android® Mode

Press the "X" + "HOME" button; LED1+LED4 will flash quickly.

Click the "Xbox Wireless Controller" device name on your Android devices; LED1+LED4 light will be steady on after successful pairing.

(In Bluetooth iOS®/PC X-Input mode, the setup process is the same.)

NOTE: The iOS® device system must be 13.0 or above.

How to Adjust Turbo Speed

Hold down the TURBO key and press one of the corresponding A, B, X, Y, L, ZL, R, ZR keys for TURBO mode settings.

Repeated operations can switch or cancel automatic TURBO mode.

Three Turbo speed settings: 5-10-15 HZ (default middle speed).

Press and hold the "Turbo + R3" button to adjust the controller shooting speed.

"Turbo + R3 up" increases the shooting speed by 1 level.

"Turbo + R3 down" decreases the shooting speed by 1 level.

Calibration Setup

Nintendo Switch® Six-Axis Calibration Setup

If the axis sensor is not calibrated, use the following instructions to recalibrate it.

Connection State:

Access sensor calibration on the console: "System Setting" > "Controllers and Sensors" > "Calibrate Motion Controls".
Keep the controller flat and press "+" or "-".
Calibration is complete when "calibration completed" is displayed.

Shutdown State:

Press and hold the "A" + "-" + "HOME" button for 3 seconds to turn on.
Two groups of front and rear lights will flash.
Press "+" until the LED turns off; calibration is then completed.

Switch Calibration Interface

Screenshots of the Nintendo Switch 'Calibrate Motion Controls' screen. The first shows instructions to hold the controller flat and press '+' or '-'. The second shows a confirmation message 'calibration completed'.

3D Joystick Calibration Setup

If L3 or R3 are not centered, calibrate them through the console:

Press on "System Setting">"Controllers and Sensor"> "Calibrate Control Sticks".
Follow the console instructions for calibration.

Joystick Calibration Interface

Screenshots of the Nintendo Switch 'System Settings' menu, highlighting 'Controllers and Sensors' and 'Calibrate Control Sticks'. Another shows the 'Calibrate Control Sticks' screen with instructions and a visual representation of stick calibration.

RGB Light Effect Setup

Long press the "LIGHT" button at the back of the controller to switch or turn off the RGB light effect.

Press the "LIGHT" + "R3" button to switch between four light effect modes.

Dazzling Light Mode

Press "LIGHT" + "L3" briefly to pause and save the current effect mode.

Single Color Light Mode

Press "LIGHT" + "L3" briefly to switch the light color.

Single Color Breathing Light Mode

Press "LIGHT" + "L3" briefly to switch the light color.

Single-Color Breathing Cycle Light Mode

Press "LIGHT" + "L3" briefly to pause and save the current mode; press again to resume the Breathing mode.

In any mode, press the "LIGHT + UP/DOWN" buttons to adjust RGB light brightness:

"LIGHT+UP" increases brightness.

"LIGHT+DOWN" decreases brightness.

Vibration Intensity Adjustment

Four adjustable vibration intensities: 100%-75%-50%-0%.
Press and hold the Turbo + L3.
"Turbo + L3 up" increases motor vibration strength.
"Turbo + L3 down" decreases motor vibration.

Controller Functions

Button Test

If controller buttons fail or do not respond, use the console's button test option to check button functionality:

Navigate to "System Setting">"Controllers and Sensors">"Test Input Devices">"Test Controller Button".

The symbol for the pressed button will appear on the screen.

Reset Function

To reset the controller, press the Reset button located at the bottom of the controller.

Wake Up/Re-connection Function

Press HOME for 1 second to wake up and reconnect the Controller to the Switch® console.
The controller sleeps automatically if the connection fails after 15 seconds.
Press the HOME button to wake up and reconnect to the last used mode.

Precautions

Do not use the NEXUS controller for purposes other than those outlined in this Quick Start Guide.
Store and use the controller in a dry area, protected from moisture and direct sunlight.
Elevated temperatures can damage the controller.
Do not disassemble the controller.
Stop playing with the controller if you feel uncomfortable or tired. Consult a doctor if symptoms persist.
Take regular breaks during play.
This controller is not intended for children younger than 3 years.
To protect the environment, the NEXUS controller cannot be disposed of with household waste. Please return this controller to a designated collection point for recycling.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

If you have any questions or require support, contact the NITHO Team at support@nitho.com or visit the website www.nitho.com.

NITHO GmbH - Victoriastrasse 3b - 86150 Augsburg - Germany

Contact: SUPPORT@NITHO.COM | WWW.NITHO.COM | NITHOGAMES | NITHOGAMES

	Nitho Nexus Wireless Controller Quick Start Guide Discover the Nitho Nexus Wireless Controller with this comprehensive quick start guide. Learn about its features, specifications, setup for Nintendo Switch, PC, iOS, and Android, calibration, lighting, and vibration adjustments.
	NITHO COSMOS Wireless Controller Quick Start Guide - Setup & Features Get started with the NITHO COSMOS Wireless Controller. This quick start guide covers setup for Nintendo Switch, PC, and iOS, features like Turbo and RGB lighting, and important precautions.
	NITHO FURY Wireless Controller Quick Start Guide A comprehensive guide to setting up and using the NITHO FURY Wireless Controller, covering specifications, connectivity, features, and basic operation for gaming on Switch, PC, and iOS devices.
	NiTHO SMART PS Controller Quick Start Guide Comprehensive guide for the NiTHO SMART PS controller, covering product overview, specifications, button layout, connection instructions for PS, PC, Android, iOS, and Switch, vibration adjustment, axis calibration, turbo setup, macro programming, reset function, and precautions.
	Nitho Adonis Wireless Controller Quick Start Guide A quick start guide for the Nitho Adonis Wireless Controller, detailing its specifications, main features, connection setup for consoles and PCs, sleep mode, precautions, test mode, button correspondence, and FCC warnings.
	Nitho Drive Pro V16 MLT-DP16-K Quick Start Guide Quick start guide for the Nitho Drive Pro V16 gaming steering wheel (Model MLT-DP16-K), covering specifications, setup, platform compatibility, and troubleshooting for PC, PS3, PS4, Xbox One, and Switch.
	NITHO DRIVE PRO ONE Quick Start Guide Get started quickly with the NITHO DRIVE PRO ONE racing wheel. This guide covers setup for PC, PlayStation, Xbox, and Nintendo Switch, detailing features like zero deadzone technology, metallic paddles, and analog pedals for an immersive racing experience.
	Nitho XB1-CST1-K Charging Station Quick Start Guide Concise guide for setting up and using the Nitho XB1-CST1-K Charging Station for Xbox One controllers. Learn how to charge your controllers and benefit from warranty extensions.