Amkette EvoFox GO Wireless Gamepad

Product Overview

• TURBO Button: Button for activating turbo functionality.
• SELECT Button: Standard selection button.
• L Analog: Left analog stick for movement and aiming.
• D Pad: Directional pad for precise directional input.
• EZ Click Setup Button: Button used for configuring macro functions.
• Vibration Increase Button: Button to increase the intensity of gamepad vibration.
• SR Button: Shoulder button, often used for actions.
• EZ Click Button: Secondary button for EZ Click setup.
• Right: Refers to the right side of the gamepad.
• EvoFox Home Button: Powers the gamepad on/off and returns to the home screen.
• Charging LED: Indicates the charging status of the gamepad.
• LB - Bumper: Left bumper button.
• Mobile Clamp: An adjustable clamp to securely hold a smartphone.
• Button: General button.
• START Button: Standard start button for pausing or menu access.
• RT - Trigger: Right trigger button, often used for shooting or acceleration.
• RB - Bumper: Right bumper button.
• ABXY Action Buttons: Primary action buttons (A, B, X, Y) for game commands.
• R Analog: Right analog stick for movement and aiming.
• Vibration Decrease Button: Button to decrease the intensity of gamepad vibration.
• SL Button: Shoulder button, often used for actions.
• EZ Click Button: Secondary button for EZ Click setup.
• Left: Refers to the left side of the gamepad.
• TYPE-C Charging Port: Port for charging the gamepad using a USB Type-C cable.

LED Indication

The gamepad enters sleep mode after 10 seconds of disconnection. It automatically turns off after 5 minutes of inactivity. To manually power off, press and hold the EvoFox Home Button for 5 seconds.

Turbo Settings

Enable/Disable Turbo

To enable turbo on a specific button (ABXY, LT, RT, LB, RB), press the Turbo Button in combination with the desired button. Repeat the same combination to disable the turbo function.

Adjust Turbo Speed

Press the Turbo Button along with the DPAD UP or DPAD DOWN to increase or decrease the turbo speed. The gamepad will vibrate to confirm the speed change.

Clear All Turbo Settings

To clear all active turbo settings, press and hold the Turbo Button. All four LEDs will blink, and the gamepad will vibrate to indicate that all turbo functions have been cleared.

Changing Vibration Levels

There are four adjustable vibration levels:

• Press the SR Button to increase vibration intensity.
• Press the SL Button to decrease vibration intensity.

LED Status for Vibration

• High Vibration: [LED 1 blinking]
• Medium Vibration: [LED 2 blinking]
• Low Vibration: [LED 3 blinking]
• No Vibration: [LED 4 blinking]

Enhance Joystick Precision

Enable Joystick Precision

Press the EZ Click Button in combination with the LEFT JOYSTICK to enable enhanced joystick precision.

Disable Joystick Precision

Press the EZ Click Button in combination with the LEFT JOYSTICK again to disable this feature.

Troubleshooting

Gamepad Not Detected

Ensure the gamepad is charged, in the correct pairing mode, and not connected to another device. You may need to unpair and re-pair it.

Gamepad Disconnecting

The gamepad may need to be charged.

Game Compatibility Issues

Verify that the game supports gamepad input on Android or iOS devices.

Connection Problems

If facing connection issues, try unpairing and resetting the gamepad.

Specifications

Warranty Statement

The Amkette EvoFox GO Smartphone Wireless Gamepad is covered by a 1-year performance warranty against manufacturing defects. The warranty applies to the original purchaser with proof of purchase. It does not cover damage from misuse, abuse, or improper storage. Amkette is not responsible for any consequential damages.

For warranty service, contact the Technical Support Line or send the defective product, postage pre-paid, with proof of purchase to the Customer Care Service Center. Return postage will be covered by Amkette.

Customer Care Service Center

Address: Amkette House, C-64/4, Okhla, Phase-II, New Delhi-110020

Toll Free: 1800-11-9090 (9:30 AM - 6:00 PM)

Phone: +91 9312691448 (9:30 AM - 6:00 PM)

Email: techsupport@amkette.in

Register your product for hassle-free service at: WWW.AMKETTE.COM/REGISTER

Quick Start Guide

Connecting to Devices

iPhone, iPad, and Apple TV Mode

1. Press the EvoFox Home Button + SELECT Button.
2. Open Bluetooth Settings on your device.
3. Connect to "DUALSHOCK 4 Wireless Controller". The LED 4 will indicate connection.

Android Mode

1. Press the EvoFox Home Button + START Button.
2. Open Bluetooth Settings on your device.
3. Connect to "Wireless Controller". The LED 4 will indicate connection.

Android HID Mode

1. Press the EvoFox Home Button + X Button.
2. Open Bluetooth Settings on your device.
3. Scan for devices and pair with "EvoFox Go". The LED 3 will indicate connection.

Reconnecting

To reconnect, simply press the EvoFox Home Button to power on the gamepad.

Easy Click Setup (Macros)

Enable Macro

1. Press the EZ Click Button + MR Button or EZ Click Button + ML Button simultaneously to set a macro. The connection LED will blink.
2. You can use up to 14 button impressions to set up a macro. Buttons must be pressed in the intended sequence.

Disable Macro

Repeat the enabling step (Step 1 above) to disable the macro.

Clear Macros

To clear all configured macros, press and hold the EZ Click Button. All four LEDs will blink, and the gamepad will vibrate to confirm that your macros have been cleared.

Charging the Gamepad

Ensure the gamepad is fully charged before first use.

• Charging: The LED will be blinking green.
• Fully Charged: The LED will be a stable green.