Fingers RGB-BRUNO-C5 Fashion PC Case Installation Guide
Welcome to the installation guide for your new Fingers RGB-BRUNO-C5 Fashion PC Case.
For more information, visit: fingers.co.in
Hard Disk Installation Steps
Step 1: Remove the Left Panel
Carefully remove the left side panel of the PC cabinet.
Visual: The interior of an empty PC case, showing motherboard mounting points, cable management channels, and drive bays.
Step 2: Install HDD/SSD
Place your Hard Disk Drive (HDD) or Solid State Drive (SSD) into the designated HDD/SSD slot provision. Secure it firmly using screws.
Visual: The interior of the PC case with drive bays clearly labeled: 'HDD 1', 'SSD 1', 'HDD 2', 'HDD 3'. This shows the specific locations for drive installation.
Step 3: Reattach Panel
Once the drive is secured, cover the cabinet with the left panel and fasten it using the provided thumb screws.
Visual: The exterior of the PC case, showing the side panel with ventilation perforations.
Product Information
Model: RGB-BRUNO-C5
Type: Fashion PC Case
Version: 1.0.0
Notes:
- Images shown may vary from the actual product.
- Specifications, features, and appearance are subject to change without notice.
- All logos, brands, trademarks, and product names are properties of their respective owners.
- Product warranty is governed by warranty terms mentioned on www.fingers.co.in.
- This product falls under e-waste (Management & Handling) Rules, 2011. For proper disposal methods, visit our website www.fingers.co.in.
