User Guide for StarTech Com models including: ST121HD20FXA2, ST121HD20FXA2 4K 60Hz HDMI over Fiber Extender, 4K 60Hz HDMI over Fiber Extender, 60Hz HDMI over Fiber Extender, HDMI over Fiber Extender, Fiber Extender, Extender

StarTech.com 4K HDMI over Fiber Extender Kit, 4K 60Hz up to 3300ft/1km (Single Mode) or 1000ft/300m (Multimode) LC Fiber Optic, HDR, HDCP, 3.5mm Audio/RS232/IR Extender, Transmitter and Receiver Kit User manual (0.3 MB)

ST121HD20FXA2

4K 60Hz HDMI over Fiber Extender Kit - HDMI Extenders | StarTech.com

View PDF

StarTech.com 4K HDMI over Fiber Extender Kit, 4K 60Hz up to 3300ft/1km (Single Mode) or 1000ft/300m (Multimode) LC Fiber Optic, HDR, HDCP, 3.5mm Audio/RS232/IR Extender, Transmitter and Receiver Kit View PDF


File Info : application/pdf, 2 Pages, 264.04KB

PDF preview unavailable. Download the PDF instead.

mmo 109727352 1680102251 1163 23215
Quick-Start Guide

HDMI over Fiber Extender - 4K 60Hz
Product ID
ST121HD20FXA2 Transmitter

12

3

4

5

6

7

8

9

10

11

12

13

14

Receiver

123

4

5

8

9

10

Component 1 Power LED Indicator

11

15

14

Function
· Transmitter and Receiver: Solid Red when the Universal Power Adapter is connected

2

Optical Signal LED Indicator

3 HDMI Signal LED Indicator

4 IR Input Port 5 IR Output Port 6 Audio Input Selector

7 EDID Selector

8 Service Port 9 DC 5V Input
10 Optical Connection Port
11 HDMI Output Port 12 HDMI Input Port 13 Line In Port 14 Serial Terminal Block 15 Audio Output

· Transmitter and Receiver: Solid Green when the Transmitter and Receiver establish an optical link
· Transmitter: Solid Green when an HDMI Source Device is connected to the HDMI Input Port
· Receiver: Solid Green when an HDMI Display Device is connected to the HDMI Output Port
· Transmitter and Receiver: Connect an IR Receiver
· Transmitter and Receiver: Connect an IR Blaster
· Change between HDMI Audio Pass-through, or Line In
· Set the EDID mode for the HDMI Extender · 11: Copy Receiver's HDMI Output EDID · 10: Copy Transmitter's HDMI Output EDID · 01: Force 4K 60Hz EDID · 00: Force 1080P EDID
· Transmitter and Receiver: For manufacturer use only
· Transmitter and Receiver: Connect the Universal Power Adapter
· Connect the Transmitter and Receiver with a Single Mode or Multi Mode Fiber Optic Cable
· The LC Simplex SFP Module is pre-installed · Third Party SFP Module's cannot be used
· Connect an HDMI Display Device
· Connect an HDMI Source Device
· Connect a 3.5mm Audio Device
· Transmitter and Receiver: Connect a RS232 Serial Device to the Terminal Block for bidirectional communication
· Connect to an Audio Output Device

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: January 17, 2023 8:29 AM

Product Information
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/ST121HD20FXA2
Package Contents
· Local HDMI Extender Unit x 1 · Remote HDMI Receiver Unit x 1 · IR Receiver x 2 · IR Blaster x 2 · Power Adapter x 2 · Quick-Start Guide x 1
Requirements
· HDMI Source Device x 1 · HDMI Display Device x 1 · HDMI M/M Cables (sold separately) x 2 · Single Mode LC Fiber Optic Cable up to 3300 Feet (sold separately) x 1
· Multi Mode LC Fiber Optic Cable up to 1000 Feet (sold separately) x 1
Installation
Transmitter and Receiver
Note: Ensure the HDMI Display Device and the HDMI Source Device are powered off before you begin the installation.
1. Position the Transmitter near the HDMI Source Device, and the Receiver near the HDMI Display.
2. Set the EDID Selector switches to the desired EDID function for the setup.
3. Connect an HDMI Cable (not included) from the HDMI Input Port on the Transmitter to the HDMI Source Device.

4. (Optional) Connect an HDMI Cable from the HDMI Output Port on the Transmitter to the Local HDMI Display.
5. (Optional) Connect an Audio Source Device to the Line In port on the Transmitter.
6. Connect a Single or Multi Mode Fiber Optic Cable to the Optical Output Port on the Transmitter and to the Optical Input Port on the Receiver.
Note: The cabling cannot go through any networking equipment (e.g. router, switch, etc.).
7. Connect an HDMI Cable to the HDMI Output Port on the Receiver and to the HDMI Display Device.
8. (Optional) Connect an Audio Device to the Audio Output port on the Receiver.
9. Connect the Universal Power Adapter to the DC 5V Port on the Transmitter to an AC Electrical Outlet.
10. Connect the Universal Power Adapter to the DC 5V Port on the Receiver to an AC Electrical Outlet.

Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user's authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. Safety Measures · If product has an exposed circuit board, do not touch the product under power. Mesures de sécurité · Si l'un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu'il est sous tension.  ·  Misure di sicurezza · Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso. Säkerhetsåtgärder · Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

StarTech.com Ltd.
45 Artisans Cres London, Ontario N5V 5E9 Canada

StarTech.com LLP
4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.

StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom

StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp



References

Adobe PDF Library 17.0 Adobe InDesign 18.1 (Windows)