Tunai Wand Bluetooth Transmitter

IMPORTANT NOTICE

DO NOT expose the product under direct sunlight for long hours
DO NOT disassemble the product; unauthorized disassembly will result in warranty expiration
USE ONLY power adapters with 5V output

WARRANTY

Tunai provides a one-year product warranty. Please keep your purchase proof and package.

The warranty does not cover the following:

Consumable parts (example: exterior coating damage)
Appearance damage
Damage caused by improper use with other products
Damage caused by failure to comply with instructions
Purchased from an unauthorized seller
Unauthorized disassembly of the product
Damage caused by accident, abuse, improper use, fire, earthquake, or other external causes.

TUNAI WAND OVERVIEW

The Tunai Wand is a Bluetooth transmitter with the following components:

Button: Used for mode change/wake up and entering pairing mode.
LED Indicator: Shows the status of the device.
USB Port (Power/Audio): Connects to power and for USB audio input.
AUX Port (Audio): 3.5mm audio input.
SPDIF (Audio): Optical audio input.

INPUT PORTS

USB: Power supply and USB audio input.
AUX: 3.5mm audio input.
SPDIF: Optical audio input.

BUTTON

Short press: Mode change / Wake up.
Long press: Force WAND to enter pairing mode.

LED Indicator

LED Color	LED Status	Pairing Mode
White	AUX	Rapid Flash	Pairing Mode
Blue	SPDIF	Slow Flash	Available for previous paired device to connect
Orange	Micro USB	LED On	Connected
		LED Off	LED goes off automatically after 5 minutes

INSTALLATION

Connect WAND and USB power adapter with the included micro USB cable. The LED will flash once powered.
Connect WAND and the audio source to the input port using the corresponding cable (micro USB and 3.5mm to RCA are included).

PAIRING

ENTER PAIRING MODE

WAND will enter pairing mode when powered for the first time.
LED will flash rapidly when entering pairing mode.
To force re-enter pairing mode, long press the button for 5 seconds.

PAIRING WITH BLUETOOTH HEADPHONES

Force both WAND and Bluetooth headphone to enter pairing mode. WAND will enter pairing mode automatically when powered for the first time.
WAND will be connected with the Bluetooth headphone automatically once both enter pairing mode.
LED indicator stops flashing once paired.

AUDIO CODECS

WAND supports aptX for high-quality audio, aptX for low latency, and standard SBC. To connect with aptX or aptX low latency, the Bluetooth headphone will need to also support these audio CODECs. Otherwise, standard SBC will be used for the connection.

Connection priority: aptX low latency > aptX > SBC.