larm.com
P65Warnings.ca.gov
SECO-LARM USA Inc
Instruction Manual for ENFORCER models including: SD-7113-GSP, SD-7113-RSP, SD-7183-GSP, SD-7213-GSP, SD-7213-RSP, SD-7283-RSP, SD-7113-GSP Request Exit Plate with Pneumatic Timer, SD-7113-GSP, Request Exit Plate with Pneumatic Timer, Plate with Pneumatic Timer, Pneumatic Timer, Timer
Seco-Larm RTE Plate with Pneumatic Timer – Red – National Security Tech
File Info : application/pdf, 4 Pages, 312.15KB
DocumentDocumentRequest-to-Exit Plate with Pneumatic Timer Installation Manual * 5024193 Conforms to UL Std. 294 SD-7213-GSP shown Pneumatic Timer No Power Required Model SD-7113-GSP* SD-7113-RSP* SD-7183-GSP* SD-7213-GSP* SD-7213-RSP SD-7283-RSP* Faceplate Slimline plate Slimline plate Slimline plate Single-gang plate Single-gang plate Single-gang plate Message Exit / Salida Exit / Salida Push to Exit Exit / Salida Exit / Salida Push to Exit Pushbutton Green mushroom Red mushroom Green mushroom Green mushroom Red mushroom Large red mushroom The ENFORCER SD-7xx3-xSP series Request-to-Exit Plates with Pneumatic Timer are ideal when providing power to a timer is inconvenient, hazardous, or not conforming with local ordinances and codes. Adjusting the time is easy via a timing screw and can be performed on the spot without tools. Conforms to NFPA 101 Fire Codes for non-electrical breaking of contact Functions entirely without electricity Excellent for installations where supplying additional timer power is inconvenient Reliable US-made pneumatic components Stainless steel single-gang faceplate English and Spanish printed on the faceplate (except SD-7183-GSP, SD-7283-RSP) Timer adjustable for 1~60 seconds Request-to-Exit Plate with Pneumatic Timer Parts List 1x Request-to-exit plate 2x Faceplate screws 1x Manual Specifications Model SD-7113-GSP SD-7113-RSP SD-7183-GSP SD-7213-GSP SD-7213-RSP SD-7283-RSP Faceplate Slimline, brushed stainless steel Single-gang, brushed stainless steel Mushroom Size cap button Color Green Standard Red Green Large Red Timer Pneumatic: 1~60 seconds* Switching capacity 5A@125VAC Wiring Red White 2x N.C. #18 AWG 9" (230mm) for fail-safe 2x N.O. #18 AWG 9" (230mm) for fail-secure Destructive attack level Level I Line security Level I Endurance level Level I Standby power Level I Operating temperature 32°~131° F (0°~55° C) Dimensions 11/2"x41/2"x31/2" (38x115x88 mm) 23/4"x41/2"x31/2" (70x115x88 mm) * Note: Time is precise to within ±10% for constant temperature and may vary according to environmental factors. Overview SD-7113-xSP SD-7183-GSP 41/2" 115 mm) PUSH TO EXIT 31/2" (88mm) 11/2" (38mm) SD-7213-xSP 11/2" (38mm) SD-7283-RSP PUSH TO EXIT 23/4" (70mm) 23/4" (70mm) 2 SECO-LARM U.S.A., Inc. Request-to-Exit Plate with Pneumatic Timer Installation 1. Find a suitable location for the pneumatic request-to-exit plate. 2. The pneumatic request-to-exit plate can be either surface mounted or flush mounted. 3. Wire the request-to-exit plate as described below in Wiring. 4. Adjust the timer as described below in Adjusting the Timer. 5. Test the function of the exit plate and timer, as well as the timer delay. Wiring 1. For N.C. operation (fail-safe), connect the red wires to the electronic lock or other device. 2. For N.O. operation (fail-secure), connect the white wires to the electronic lock or other device. NOTE: Use only low-voltage, power-limited/Class 2 power supply and low-voltage field wiring not to exceed 98.5ft (30m). Adjusting the Timer 1. Locate the timing screw as shown in the figure to the right. 2. Gently rotate the timing screw to: a. To increase the delay, turn the screw clockwise. b. To decrease the delay, turn the screw counterclockwise. NOTE: Do not overtighten or over-loosen the timing screw. If the screw becomes very loose, retighten it until it feels secure. 3. The minimum delay time is approximately 1 second, and the maximum delay time is approximately 60 seconds. Use a stopwatch to adjust the time to suit the application. Timing Screw Timer Assembly Sample Applications Installation with a Maglock and Access Control System (SD-7213-xSP Shown) Use ENFORCER Request-to-Exit Plates with Pneumatic Timer anywhere zero-spark switching is required. For N.C. (fail-safe) operation, connect the red wires. SECO-LARM U.S.A., Inc. () (+) SECO-LARM Series Electromagnetic Lock Access Control Power Supply 3 Request-to-Exit Plate with Pneumatic Timer Sample Applications (Continued) Installation with a Maglock and an Access Control Keypad Access Control Power Supply Digital Keypad (outside the protected area) Request-To-Exit Plate (inside the protected area) EXIT Tamper O/P (N.C.) () (+) 12VDC Battery (optional) SALIDA ENFORCER Electromagnetic Lock (+) () IMPORTANT WARNING: Incorrect mounting which leads to exposure to rain or moisture inside the enclosure could cause a dangerous electric shock, damage the device, and void the warranty. Users and installers are responsible for ensuring that this product is properly installed and sealed IMPORTANT: Users and installers of this product are responsible for ensuring that the installation and configuration of this product complies with all national, state, and local laws and codes. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or codes. California Proposition 65 Warning: These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the date of sale to the original customer. SECO-LARM's obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM and the purchaser's exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM's option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damage of any kind to the purchaser or anyone else. NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2023 SECO-LARM U.S.A., Inc. All rights reserved. SECO-LARM ® U.S.A., Inc. 16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com PITSW1 Phone: (949) 261-2999 | (800) 662-0800 Email: sales@seco-larm.com MI_SD-7xx3-xSP_WEB_220909.docx