2CONNET LED Monitor User Manual

Brand: 2CONNET

Product Type: LED Monitor

Safety Precautions and Maintenance

Unplug the monitor before cleaning it with a slightly damp cloth.
It is recommended to wipe the screen with a clean, dry cloth when the monitor is switched off.
Do not use alcohol or ammonia-based liquids.
This monitor is designed with ventilation holes; please do not cover or block them.
Avoid placing the monitor near an electric heater or in an enclosed room without ventilation.
Please do not insert objects or spray any liquid on the monitor.
Please do not position the monitor on an uneven surface. Doing so may cause the monitor to fall and become damaged or cause injury to the user.
Unplug the monitor if it will not be in use for an extended period of time.
Please do not place heavy items on the monitor or electric cord.
Do not open the monitor's back panel, as the monitor contains high voltage currents.

Caution: RISK OF ELECTRONIC SHOCK. DO NOT OPEN. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

Note: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature.

What's in the Box?

Monitor
Stand
AC adapter
Signal lines
Quick start guide

Features

16.7M High Quality Image Colors
Smart Image Screen – OSD with simple layout and easy selection
Smart Controls
Auto Function – when personal settings aren't set, the monitor will auto-adjust to optimum settings

Indicator Light

Blue light indicates the power is on.
Blue light indicates the signal is operating normally.
Blue flash indicates there is no input signal.

Figure 1: Power Indicator Light (Diagram description: A simple diagram showing buttons labeled MENU, Down, Up, AUTO, POWER. Below these, "Power Indicator Light" is indicated.)

Figure 2: Power Indicator Light (Diagram description: A simple diagram showing buttons labeled MENU, Up, Down, AUTO, POWER. Below these, "Power Indicator Light" is indicated. Note: the key function key is shown in Figure 1 or figure 2.)

Adjustment Settings

MAIN MENU ITEM	MAIN MENU ICON	SUB MENU ITEM	SUB-SUB MENU ITEM	DESCRIPTION
BRIGHTNESS	? (Brightness)	BRIGHTNESS	Adjusting screen brightness(0~100)	None
	? (Contrast)	CONTRAST	Adjusting screen contrast(0~100)	Brightest to Darkest Ratio
	? (ECO)	ECO	STANDARD/NETWORK/ GAME/FPS/RTS/MOVIE	scene mode
	⬇️ (DCR)	DCR	OFF/ON	Dynamic Contrast Control
	☀️ (HDR)	HDR	OFF/ON	High Dynamic Range
IMAGE	? (Saturation)	SATURATION	Adjust saturation (0~100)	None
	? (Hue)	HUE	Tone adjustment (0~100)	Hue Control
	? (Gamma)	GAMMA	GAMMA2.2/GAMMA 2.4/GAMMA1.8	gamma correction
	? (Sharpness)	SHARPNESS	OFF/ON	None
	? (Ratio)	RATIO	16:9/4:3	Adjust picture scale
COLOR TEMP	?️ (Color Temp)	COLOR TEMP	6500K/9300K/USER	Color temperature model
	? (Red)	RED	R value (0~100)	Adjust the RGB value, only USER is optional
	? (Green)	GREEN	G value (0~100)
	? (Blue)	BLUE	B value (0~100)
OSD SETTING	?️ (OSD)	LANGUAGE	简体中文/ ENGLISH/ Русский/ Deutsch/ Español/العربية/ 한국어/ Français/ Português	Support for adding other languages
		OSD H.POS.	Adjust the horizontal position of the OSD (0~100)	None
		OSD.V.POS.	Adjust the vertical position of the OSD (0~100)	None
		OSD TIMER	OSD display time (0~120/s)	None
		TRANSPARENCY	OSD transparency (0~100)	None
RESET	? (Reset)	RESET	None	The OSD menu will be reset to the default
MISC	⚙️ (Misc)	SIGNAL	HDMI/DP	input source
		FREESYNC	OFF/ON	Prevent picture tearing
		MUTE	OFF/ON	None
		VOLUME	Adjust the volume (0~100)	None

Compatible Resolutions

RESOLUTION	H-FREQUENCY (KHZ)	V-FREQUENCY (HZ)
1440x900	55.47	60.00
1680x1050	55.94	60.00
1920x1080	64.67	60.00
	65.29	60.00
	67.50	60.00

Screen Image Setups

The control panel at the rear has five keys to adjust the monitor settings with the aid of the on-screen display.

Control Panel Buttons:

Menu: Displays main menus; alternate function: Enter
Down/Up: Adjust Brightness and Contrast; Navigate up/down when in MENU
AUTO: Acts as Auto-config; acts as EXIT when in MENU
Power: ON/OFF button

Troubleshooting

No image on screen
- a) Check if the monitor is powered ON.
- b) Verify that the monitor's brightness and contrast are within the normal settings.
- c) Check if the power indicator is flashing. If so, this indicates that the monitor is not receiving the input signal.
- d) If connected to a notebook or laptop, make sure that the TV signal has been switched to the correct screen mode.
Image is out of focus or blurry
- a) Check if the image signal cable is inserted properly (upright position).
Screen is flashing
- a) The power is insufficient or too weak to connect the monitor.
- b) To avoid magnetic field around the monitor, do not place the following devices too close to it: speakers, fluorescent lighting, AC transformer, table fan, etc.
- c) Press the Exit key at the rear of the monitor, and the Auto Adjust Image function will automatically apply, optimizing settings to the display.
Monitor is displaying wrong or unusual colors
- a) If red, green, blue, or any unusual color disappears, check to see if the signal cord is connected properly. If the plug is loosely connected, it may cause a poor connection.
- b) Try connecting to another PC for comparison.
Cleaning the monitor
- a) Make sure that the monitor's power has been switched OFF.
- b) Do not spray any liquid directly on the screen or plastic panel.
- c) Use a clean, soft cloth to clean the monitor screen.
- d) If it is still dirty, you may add a small amount of ammonia-free liquid and alcohol-free glass cleaner to remove excess residue on the monitor screen.