3D Printers | Desktop, Professional and Industrial | Uniz
Instruction Manual for LINIZ models including: zDental Model X Stone Fastest Dental Printing, zDental Model X, Stone Fastest Dental Printing, Fastest Dental Printing, Dental Printing, Printing
UNIZTECHNOLOGYLLC 9400ActivityRdSteLSanDiego,CA92126,US www.uniz.com Version:1.0 7. The goodusing temperatureforthisresinis21–25℃. Keep theresin awayfromdirect
UBEE 丨World's Fastest Dental Powerhouse
File Info : application/pdf, 3 Pages, 163.42KB
DocumentDocumentzDental Model X Stone Instruction for Use Product Discription: zDental Model X Stone is a light-curing resin for the production of dental models using 3D LCD printers utilizing wavelengths between 385nm405nm. zDental Model X Stone is an effective and fast-printing resin. This low viscosity model material is ideal for diagnostic models and orthodontic appliance models requiring excellent precision, long-term dimensional stability, high reliability, superior fit and easy-cleaning. zDental Model X Stone has excellent anti-sedimentation activity which makes handling easily. Intended Use: Diagnostic models, die models, implant models, orthodontic models Color and Package: Stone or light gray, 500ml/bottle, or 5L/drum Contra-indications: zDental Model X Stone contains (meth)acrylate and phosphine oxide which can cause allergic reactions at skin contact. In case of an allergic reaction, please contact a medical physician. Use and Safety Information: 1. Wear nitrile rubber gloves and a face mask when using this resin. 2. Keep the room ventilated. 3. Swallowing such as eating and drinking is forbidden in the printing place. 4. Avoid liquid or incompletely cured resin directly contact with skin. If contact with skin occurs, wipe resin away and wash thoroughly with cold water, use hand sanitizer or soap to assist in washing. If the users still feel uncomfortable, please see a doctor immediately. 5. If the user accidentally splashes the resin in the eyes, flush with plenty of water and seek medical attention immediately. 6. More safety details please refer MSDS of this resin. UNIZ TECHNOLOGY LLC 9400 Activity Rd Ste L San Diego, CA 92126, US www.uniz.com Version: 1.0 7. The good using temperature for this resin is 21 25 . Keep the resin away from direct sunlight or any kind of UV light. Processing printed parts: Mixing resin before using: In Bottle: Shake bottle vigorously prior to pouring into resin tank. In resin tank: Stir resin with a soft spatula. Take care not to damage the film of the resin tank. This step is necessary to avoid getting bad printing job caused by the (possible) pigment sediment from the bottom of the vessel. After model is printed, it is recommended to restore the remaining resin into bottle and avoided leave the resin in the resin tank for a long time. Preparation: Prepare a print job using a slicing software, such as Uniz Dental, Uniz Desktop or Uniz Maker, in depending with the UNIZ printer type. zDental Model X Stone can be printed in layer thickness of 50m or 100m. For more information, please refer to the Uniz Dental Software Guide (www.uniz.com). Printing: Turn on the printer and ensure it well. Check and clean build platform, resin tank, LCD printing screen. Put the resin tank filled with mixed resin onto the LCD printing screen, and fix the tank well onto the screen. Upload the slicing file into printer through USB or WIFI, then start printing. For more information, refer to the printer instructions (www.uniz.com). Post-processing: Detaching printed parts: Once the printing process has ended, a dripping time of resin approximately 10 min is recommended, using a soft spatula to remove the resin residue on the build platform into resin tank. Then, carefully detach the printed objects from the build platform. Washing: Wash parts in IPA bath with at least 98% purity. Best results are achieved when using a pre and post wash. UWash ultrasonic cleaner is recommended for washing parts. - Pre-wash bath: 1 minute. After using, if the IPA density increases 5%, alternate clean IPA for this www.uniz.com UNIZ TECHNOLOGY LLC 9400 Activity Rd Ste L San Diego, CA 92126, US Version: 1.0 pre-washing step. - Post-wash bath: 1 minute, always use clean IPA for each post-washing step. If necessary, a dedicated soft brush can be used to help for removing residual resin. Drying: Use compressed air to parts. If residual resin remains, repeat the "washing-drying" steps. Ensure parts to dry thoroughly before post-curing. Post-Curing: Post-curing is an UV-LED light treatment to ensure that printed parts obtain optimal polymer conversion, decreasing the residual monomer of printed parts to a minimum and obtaining the required mechanical properties and surface properties. UCure, a post-cured devise from UNIZ, is recommended to cure parts. Both the occlusal side and the other side are needed to be post-cured. - One side: 1 minute, level 2, UCure - The Other side: 1 minute, level 2, UCure If printed part has supports, cure the non-supported side of printed part at first, then remove supports by same tools, finally cure the supported side. Before using, the support stub needs to be grinded and polished smoothly and be cleaned thoroughly. Storage: Stored in dark place where avoid direct sunlight or any kind of UV light, environment temperature is recommended around 15 to 28and environment humidity is less than 45%RH. Do not use resin which exceeds the expiry date. Disposal: Disposal of liquid resin waste in accordance with local regulations. UNIZ TECHNOLOGY LLC 9400 Activity Rd Ste L San Diego, CA 92126, US www.uniz.com Version: 1.0