Dyness Wi-Fi Loger Stick for DL5.0C Battery

Safety Precautions

Warning

• [Warning] Please do not put the system into water or fire, in case of explosion or any other situation that might endanger your life.
• [Warning] Please connect wires properly while installation.
• [Warning] Please do not stab, hit, trample or strike the system in any other way.
• [Warning] Please use dry powder extinguisher to put out the flame when encountering a fire hazard, liquid extinguisher could result in the risk of secondary disaster.
• [Warning] For your safety, please do not arbitrarily dismantle any component in any circumstances unless a specialist or an authorized one from our company, device breakdown due to improper operation will not be covered under warranty.

Caution

• [Caution] We have strict inspection to ensure the quality when products are shipped out, however, please contact us in case of bulging or another abnormal phenomenon.
• [Caution] For your safety, device shall be ground connected properly before normal use.
• [Caution] To assure the proper use please make sure parameters among the relevant device are compatible.
• [Caution] Please do not mixed-use batteries from different manufacturers, different types and models, as well as old and new together.
• [Caution] Ambient and storage method could impact the life span and product reliability, please consider the operation environment abundantly to make sure device works in proper condition.

Preface

Manual Description

The Wi-Fi module, also known as the serial Wi-Fi module, belongs to the Transmission layer of the Internet of Things. Its function is to convert the serial port or TTL level into an embedded module that complies with Wi-Fi wireless network communication standards. It is equipped with IEEE802.11B/G/N protocol stack and TCP/IP protocol stack. Traditional hardware devices embedded with Wi-Fi modules can directly use Wi-Fi to connect to the Internet, which is an important part of the implementation of wireless smart home, M2M, and other Internet of Things applications, and is an important component of intelligent hardware.

This platform is the third-generation photovoltaic monitoring operation and maintenance platform, through which you can manage the power station more conveniently. This operation guide will guide you to log in your account, create a power station, add equipment, and authorize users, so that you can get started as soon as possible.

This document describes in detail the basic structure, parameters, installation, and operation of the device.

1. Introduction

1.1. Brief Introduction

Dyness Wi-Fi module System is a very convenient product. The addition of Wi-Fi System makes the battery more intelligent. Users can monitor the battery data through the Dyness Smart Pro APP anytime and anywhere, which is very convenient.

1.2. Product Properties

• Built-in low power KM4 MCU, can also be used as application processor
• Frequency 100 MHz, Operating voltage: 4.5V-5.5V
• Wi-Fi / Bluetooth connectivity
• 802.11B/G/N20, channel 1-14@2.4GHz (CH1-11 for US/CA, CH1-13 for EU/CN)
• Support Bluetooth 4.2 Low Energy
• +20dBm output power in 802.11b mode
• SmartConfig (for Android and iOS devices)
• External IPEX FPC antenna
• CE, FCC certification

1.3. Product Identity Definition

[Read User Manual] Read the user manual before using.

[Warning] Be careful with your actions and be aware of the dangers.

[Professional Recycling] The WIFI Systems cannot be put into the garbage can and must be professionally recycled. After the WIFI-M01 System life is terminated, the WIFI-M01 System can continue to be used after it is recycled by the professional recycling organization and do not discard it at will.

[CE Mark] This WIFI Systems product meets European directive requirements.

[FCC Mark] This WIFI Systems product meets USA directive requirements.

2. Product Specification

2.1. Size

Table 2-1: WIFI-Module performance parameter (This table was empty in the source document).

2.2. Performance Parameter

2.3. Interface Definition

2.3.1. WIFI-Module Front Panel

WIFI-Module product panel interface configuration and function. This section details the interface functions of the front panel of the device.

After connecting the acquisition rod to the equipment, check the status of the COM light, NET light, and STAT light, and whether there is data on the platform.

When the router is connected to the network normally, the normal operation status of the collection rod after power on is:

• 1. COM light is always on: the acquisition rod is connected to the device successfully.
• 2. NET light is always on after the collection rod is powered on: the server connection is successful.
• 3. STAT light flashes: acquisition rod works normally.

2.3.2. Communication Port Pin Definition

3. Installation and Configuration

3.1. Ready for Installation

3.1.1. Environmental Requirements

• Working temperature: -20°C to +85°C
• Storage temperature: -10°C to +40°C
• Relative humidity: 5% to 85% RH
• Elevation: no more than 4000m
• Operating environment: Indoor installation, sites avoid the sun and no wind, no conductive dust and corrosive gas.
• And the following conditions are met: Installation location should be away from the sea to avoid brine and high humidity environment; The ground is flat and level; There is no flammable explosive near the installation places; The optimal ambient temperature is 15~30°C.
• Keep away from dust and messy zones.

3.1.2. Equipment Preparation

3.2. Equipment Connection

3.2.1. Connection Preparation

Download the Dyness Smart Pro App from the App Store (iOS) or [QR Code for App Download] (Android).

Register after the APP is installed: click "Sign Up", enter the registration page.

After registration, use your account and password to Log In.

3.2.2. Steps of Connection (APP)

1. Create Plants: Please log in your account and click 'Plants', and click the '...' at the top right to select 'Create Plants' to enter the power station creation page.
2. Supplement New Power Station Information: Please complete the power station information according to the prompts. The more complete the information is, the better it will be for you to manage the power station.
   • a. Improve Basic Information: Please follow the prompts to improve the basic information of the power station: the name, location, and time zone of the power station. When completing the basic information on the power station creation page, if you do not create it near the power station, you can click the "Location" column to find the power station location, and the system will automatically match the rest of the information for you. When creating a power station, the APP client will automatically locate your current location. If you create a power station nearby, you do not need to change the relevant information.
   • b. System Information: Please improve the system information of the power station according to the actual situation of the power station to be created by the user: power station type, grid connection type, installed capacity, azimuth angle, inclination angle, and production date. TIP: The APP user terminal will display the layout of the power station according to the grid connection type, and analyze the data of the power station according to the installed capacity, so please fill in after confirmation.
   • c. Other Information: Please improve the remaining information according to the actual situation of the user. The more complete the information you input, the better you can manage the power station. The currency unit in the income information will affect the income calculation of the system. Please confirm. In order to better handle after-sales problems, please fill in the organization code: EC03B0.
3. User Authorization: Please click the "Plant Visitor" column to enter the email number of the user to be authorized and add it as shown in the figure below to authorize the user.
4. Creation Completed: After all the above steps are completed, click "Finish" in the upper right corner to complete the creation of the power station.
5. Add Device: Click the "Add" button below the power station and select the collector model. You can continue to select the barcode or QR code on the direct scanning equipment to add, or enter the serial number to add. After inputting the serial number correctly, the equipment can be loaded. Click the "Finish" button in the upper right corner as shown in the figure below to complete the addition.

3.2.2. Steps of Connection (WEB)

1. Create Plants: Login URL: https://server.dyness-tech.com/, Login account, and click 'Plants' -> 'New Plant' to create a new plant. (Select the creation page of the plant according to the actual business needs)
2. Improve the Information of New Plant: Please complete the information of the power station according to the prompts. The ones with asterisks are required, and the more complete the other information is, the better it will be for you to manage the power station.
   • a. Basic Information: Please improve the power station system information according to the actual situation of the power station that the user wants to create: power station type, power station name, grid connection type, installed capacity, and station construction date. TIP: The web client will display the power station layout according to the grid connection type, and analyze the power station data according to the installed capacity, so please fill in after confirmation.
   • b. Other Information: Please improve the remaining information according to the actual situation of the user. The more complete the information you input, the better you can manage the power station. The currency unit in the income information will affect the income calculation of the system. Please confirm.
   • c. Position Setting: After completing the power station information, directly click Next in the lower right corner. To set the location, you can enter the location to search directly.
3. Add Visitors: Enter the guest mailbox to add a guest. In order to better handle after-sales problems, please fill in the organization code: EC03B0.
4. Submit: All information is completed, click Submit, and the power station is created successfully.
5. Add Device: As shown in the figure below, please click "New Collector" on the detail page of the power station. Select the equipment model in the pop-up dialog box and correctly fill in the equipment serial number you want to add. After confirmation, submit it.

3.2.3. Steps of Connection (Module Insertion)

1. Insert the module into the battery USB port as shown in the figure. Press and hold the white reset button for 2-3 seconds, then release it, and the NET light flashes in the distribution network mode.
2. Open the APP and switch to the "Me" page after login. Click "Config Network", select the wireless network, enter the password, and scan the SN number of the collector to be distributed.
3. Click the "Start Config" button to configure the network, and wait for the configuration to succeed.

4. Serial Number

The SN code of the Wi-Fi module is shown in the figure below. (The figure is not included in the text, but the location is indicated).

5. Troubleshooting