EKVIP Shower Cubicle
Safety Instructions
For safety reasons, the product is made of toughened glass. This glass is very tough, but if subjected to knocks or blows, it can later crack unexpectedly.
Make sure not to subject the product to knocks or distortion during installation or use.
Install the product so that there is no risk of subjecting it to knocks.
Do not allow children to play with the product.
Do not put stickers or adhesive film on the glass. If the glass cracks, it can crack into large pieces, which can result in a risk of personal injury.
Read these instructions carefully before installation and use. Failure to follow all instructions and safety instructions can result in a risk of personal injury and/or material damage. Save these instructions for future reference.
Do not hang or climb on the walls, as they are not made to withstand stress.
WARNING! Glass is very fragile. Wear safety gloves when handling it.
Symbols
- CE Approved in accordance with the relevant directives.
- [Read instructions symbol] Read the instructions.
Technical Data
- Connection: R15 (1/2")
- Hand shower: Ø10 cm
- Ceiling shower: Ø22 cm
- Size: W 90 x H 225 x D 90 cm
- Weight: 73 kg
Description
The shower cubicle is equipped with a massage function, built-in thermostat mixer, ceiling shower, adjustable hand shower, and a spacious shelf. The massage function consists of four nozzles with adjustable jets in two positions, activated by water pressure. The shower cubicle profiles are made of black matt and white enamelled aluminium, and the glass sections are of hardened safety glass. The water connection is R15 (1/2").
NOTE: Connecting hoses for cold and hot water are sold separately.
Assembly
Refer to Figures 1-12 for assembly instructions.
Maintenance
Cleaning
- Clean regularly with a mixture of equal parts water and vinegar. Allow to act for 5 minutes, then rinse with water.
- Use bactericidal detergent on a regular basis.
Tip!
- Leave the doors open after using the shower to reduce the risk of mildew.
- Rinse off residual soap etc. from the walls after use.
Note!
- Do not use strong or abrasive detergents or solvents, as this can damage the product.
- Follow the manufacturer's instructions when using detergents. Do not use steel wool/Scotchbrite, abrasive detergents, or sharp implements.
Maintenance
- Lubricate the doors if they make a noise or do not open and close smoothly.
- Check that all parts are correctly fitted and sealed before using water.
- Check before use that the walls are vertical and correctly aligned to each other.
Troubleshooting
| Problem | Action |
|---|---|
| Leakage | Check the watertightness between the base and the glass walls. Check the watertightness between the base and the rails. Check the watertighteness between the rails and the glass walls. |
| Walls do not fit properly to the base | Check with a spirit level that the base is horizontal. Check with a spirit level that the walls are vertical. Check with a spirit level that the shower cabinet is fastened vertically to the wall. |
| Doors make a noise and/or do not open and close smoothly | Check door wheels and their lubrication. |
Jula â products for home and garden
