Bosch TCA5309/01 Full Automatic Coffee Maker - Parts Overview
Component Breakdown
This document provides a detailed breakdown of the components for the Bosch TCA5309/01 full automatic coffee maker. The information is presented in a series of exploded view diagrams, each accompanied by a parts list that includes item numbers, part numbers (MAT szám), short descriptions (MAT rövid szövege), informational text (Információs szöveg), and replacement part numbers (Helyettesít# MAT).
The following sections detail various assemblies and individual parts of the coffee maker:
Page 1: Main Housing and Internal Components
This page illustrates the main housing and several internal components. Key parts include:
- 0102: Outlet coffee cpl
- 0103: Metallic stripe Inox
- 0107: 5 self-tapping screws 3mm - 12mm, round head, Torx
- 0120: Cover Bosch black
- 0121: Front faceplate black
- 0122: Front panel black
- 0132: Permanent magnets
- 0135: Spring anti kink protect Inox
- 0136: Hose silic 03.0x1.50x160 60
- 0151: Cover front faceplate black
- 0155: Guide outlet black
- 0156: Clip outlet barred black
- 0157: Side wall, black, left
- 0199: Maintenance Pack for Coffee Machines
Page 2: Water and Brewing System Components
This page focuses on components related to the water and brewing systems:
- 0201: Holder main switch
- 0202: Spring
- 0203: Push-button 569 main switch
- 0204: Rocker switch
- 0205: Steam tube inox
- 0206: Micro switch
- 0207: 5 self-tapping screws 3mm - 12mm, round head, Torx
- 0211: Button, Rotary knob black
- 0217: Handle foam device AE modif V2
- 0218: Tube foam device D9/10 56.5mm
- 0224: Control panel 569 cpl
- 0234: Jet
- 0235: Sealing
- 0236: Jet
- 0237: Hüvely (Sleeve)
- 0238: Spacer steam tube black
- 0240: Sealing
- 0241: Sealing, O-ring 3,40x1,90 Silikon/2-K red
- 0242: FEP D4,0/2,50x145mm
- 0243: Spring, Spring f. fluid connector, D=4mm, L=14mm
- 0244: Spring steam valve
- 0245: Mounting plate black
- 0246: Steam valve cpl
- 0247: Hose PFA D4,0/2,50x220mm
- 0250: Support steam tube black
Page 3: Outer Casing and Water Tank Assembly
This page displays parts of the outer casing and the water tank assembly:
- 0301: self-tapping screw 3,0x12, round head, Torx
- 0303: Foot
- 0304: Foot
- 0310: Door side wall black V2
- 0315: Side wall left
- 0136: Spare support water tank
- 0318: Side wall right black
- 0325: Water tank, Water tank holder black
- 0330: Holder black
- 0401: self-tapping screw 3,0x12, round head, Torx
- 0404: Cover, Spare powder funnel cover, black
- 0412: Cover, Upper housing cover, black
- 0414: Salver, Drip tray black V3
- 0419: Container, Coffee dregs container, black
- 0420: Cover, Water tank lid, black
- 0423: Sheet, Drip plate Inox
- 0424: Panel, Faceplate drip tray black
Page 4: Drip Tray and Internal Filter Assembly
This page shows the drip tray assembly and internal filter components:
- 0427: Container, Bean contain
- 0428: Lid, Bean container cover lid, round, black
- 0429: Support, Support floater black
- 0430: Float, Floater body red V2
- 0431: Insert for powder funnel black (cleaning tablet slot)
- 0435: Protection cover 80mm + screw 3,0x20 Inox, complete
Page 5: Electrical and Control System Components
This page details electrical and control system parts:
- 0501: 5 self-tapping screws 3mm - 12mm, round head, Torx
- 0502: Sealing, O-ring 3,40x1,90 Silikon/2-K red
- 0503: Holder micro switch black
- 0504: Micro switch D41R-QGAC
- 0505: Spring, Spring f. fluid connector, D=4mm, L=14mm
- 0507: Drive coupling
- 0508: Outlet
- 0509: Cover outlet
- 0512: Hose FEP D4,0/2,50x160mm
- 0513: Valve, Spare drainage valve cpl, Fortron
- 0515: Gear box- A-046 Basis V15, standard drive cpl., w/o adaptation cable
Page 6: Power Supply and Wiring
This page illustrates power supply and wiring components:
- 0601: 5 self-tapping screws 3mm - 12mm, round head, Torx
- 0602: El.Transformer
- 0604: Holder micro switch black
- 0606: Line cord blk H05VV-F3G075 V2
- 0607: Control PCB 220-240V
- 0608: Húzásmentesítés (Strain relief)
- 0610: Micro switch D44N-Q1UA 10A/250V/2X4,8X0.8
Page 7: Flow Meter and Pump System
This page shows components of the flow meter and pump system:
- 0701: Flow meter FHKSC 12 (0°), double insulated
- 0702: Pump SAP.HP4.V03
- 0704: Pump holder 674 D=13.5mm
- 0705: Fluid connect elbow 90°
- 0721: TCO strd wire 569 EU 184C (1xE5) brown 110/270
- 0722: TCO strd wire 569 EU 184C (1xE5) blue 110/280/400
- 0723: Clip TCO TB2010 V2 Inox
- 0724: Screw GF/Tapt.M4,0x 8 bl, galvan rd head/spring ring, Torx-20
- 0731: Spring, Spring f. fluid connector, D=4mm, L=14mm
- 0734: Sealing, O-ring 3,40x1,90 Silikon/2-K red
- 0735: Sealing, O-ring 5,28x1,78 EPDM, V2 from 08/2018 on
- 0736: Outlet valve Y shape cpl
- 0740: Insul.leeve Elbow black
- 0741: Thermobl 2010/L 230V/1400W
- 0743: Holder 674 TB2010 black
- 0744: Cover 674 TB2010 black
- 0757: Hose PFA D4,0/2,50x220mm
- 0758: Hose silic 08,0x1,75x140
- 0760: Hose FEP D4,0/2,50x160mm
- 0762: Coupling
- 0770: Temperature gauge 569 cpl
Page 8: Grinding Unit and Temperature Sensors
This page shows the grinding unit and temperature sensor components:
- 0773: Thermost TB02-B-B8D-105
- 0774: 240mm/nipple/hose clamp/hose nipple
- 0775: Tube silicon 05,0x2,00x100
- 0780: Spring ring M 5 bl galvan
- 0781: Hose PFA D4,0/2,50x 45mm
- 0782: Rugó (Spring)
- 0783: Hose silic 05,0x2,00x165, transp.
- 0801: 5 self-tapping screws 3mm - 12mm, round head, Torx
- 0802: Screw KST/PT 3,0x20 Torx-10
- 0807: Sóbetöltő tölcsér (Funnel for salt filling)
- 0808: Manzsetta (Manifold)
- 0809: Grinder unit 668 230V cpl
- 0810: Kábelköteg (Cable harness)
- 0811: Szigetelőelem (Insulation element)
- 0813: Spare kit temperature
- 0815: Rubber feet black
- 0816: Tubul.rivet 4,0x0,40x10,5
- 0817: Support motor black
- 0820: Ring grinding select
Page 9: Brewing Unit and Sealing Components
This page details the brewing unit and sealing components:
- 0901: 5 self-tapping screws 3mm - 12mm, round head, Torx
- 0902: Brewing unit, Brewing unit cpl., V10
- 0903: Sealing, O-ring (use lubricant Paraliq GTE 703 Mat.-Nr.00310574), 5,00x1,50 NBR
- 0904: Sealing
- 0905: Lubricant, for fully automatic coffee espresso machines,, food-grade silicone grease, Paraliq GTE 703, 30 g tube
- 0935: Support extract unit
- 0936: Stop black
- 0937: Kapocs apró dolgokhoz (Small parts clip)
- 0938: Hose silic 03,0x1,50x160 60
- 0939: Fluid connect black I
- 0940: Protect wall black
- 8401: User manual (de,en,fr,es,nl,ru,pt,it,pl)
- 8402: User manual (ar,bg,da,el,fi,hu,no,sv,tr)
- 8403: User manual (de,en,fr,es,nl,ru,pt,it,pl)