Franke FMY 907 FM Cooker Hood

Important Safety Information

Warning! Before proceeding with installation, read the safety information provided in the User Manual.

This manual contains essential information for the safe and correct installation of your Franke FMY 907 FM cooker hood. Please read all instructions carefully before beginning.

Included Parts

• A: Screws, 4x (2.9x9.5mm)
• B: Screws, 4x (2.9x9.5mm)
• C: Mounting Plates, 3x
• I: Screws, 5x
• L: Screws, 5x (4.2x44.4mm)
• M: Ducting Component, 2x
• N1: Chimney Section 1
• N2: Chimney Section 2
• O: Ducting Adapter
• P: Filter Component
• P4: Screws, 2x
• Q: Fasteners, 2x
• W: Filter Component, 2x
• P3: Fasteners, 2x (2.9x7.5mm)
• O3: Bracket Component
• T1, T2, T3: Electrical Components
• Z: Chimney Flap/Cover

Dimensions and Specifications

Model: FMY 907 FM

Main Hood Dimensions: Width 898 mm, Height 510 mm, Depth 440 mm.

Chimney Height Adjustment Range: Minimum 530 mm to Maximum 970 mm (from hob surface).

Ducting Options: Compatible with Ø 120 mm and Ø 150 mm ducting.

Minimum Installation Clearances: Ensure a minimum clearance of 450 mm above the hob and 450 mm to the sides of the appliance.

Installation Steps

1. Step 1: Mark the mounting positions for bracket N1 on the wall. Drill holes using an 8mm drill bit (4x) and insert appropriate wall plugs if necessary. Attach bracket N1 to the wall using screws (I, 4x).

   Visual Description: Shows marking points on a wall, drilling holes, and attaching a metal bracket (N1) with screws.

2. Step 2: Measure and mark the positions for attaching the hood to the wall, ensuring correct height (e.g., 345mm from bracket N1). Drill holes using a 12mm drill bit (2x) and secure the hood mounting points using fasteners (Q, 2x).

   Visual Description: Shows measuring and marking points on the wall relative to bracket N1, drilling larger holes, and attaching the hood's mounting points with fasteners.

3. Step 3: Attach the main hood body to the wall, aligning it with the previously installed bracket and mounting points.

   Visual Description: Shows the main body of the cooker hood being positioned and attached to the wall.

4. Step 4: Attach the first section of the chimney (Z) to the top of the hood body.

   Visual Description: Shows a metal chimney piece (Z) being slid or attached to the upper part of the hood.

5. Step 5: Attach the second chimney section (N1) over the first section, securing it with fasteners (Q, 2x).

   Visual Description: Shows a larger chimney section (N1) being placed over the first section and secured with fasteners.

6. Step 6: Attach the second chimney section (N1) again, securing it with fasteners (Q, 2x).

   Visual Description: Similar to step 5, showing the chimney section being secured.

7. Step 7: Secure the chimney section using screws (L, 1x) and a drill with an 8mm bit (1x).

   Visual Description: Shows a screw being inserted into the chimney section to secure it, using a drill.

8. Step 8: Attach mounting plates (C, 3x) to the underside of the hood or ceiling structure using screws (A, 6x (2.9x6.5mm)). These plates are used to support the chimney or ducting.

   Visual Description: Shows three mounting plates (C) being attached to a surface using screws (A). Dimensions 300mm and 200mm are indicated for placement.

9. Step 9: Connect the flexible ducting (M, 2x) to the hood's exhaust outlet and secure it using screws (L, 4x).

   Visual Description: Shows flexible ducting (M) being attached to the hood's exhaust port and fastened with screws (L).

10. Step 10: Connect the flexible ducting to the appropriate chimney outlet adapter (Ø 150 mm or Ø 120 mm) and the adapter (O).

    Visual Description: Shows flexible ducting being connected to two different sized outlets (Ø 150 mm and Ø 120 mm) and an adapter (O).

11. Step 11: Attach the first chimney section (N1) over the connected ducting and secure it.

    Visual Description: Shows the chimney section (N1) being placed over the ducting and hood assembly.

12. Step 12: Secure the chimney section (N1) using screws (B, 4x (2.9x9.5mm)).

    Visual Description: Shows screws (B) being used to fasten the chimney section (N1).

13. Step 13: Attach the second chimney section (N2) over the first section.

    Visual Description: Shows the second chimney section (N2) being placed over the first.

14. Step 14: Secure the hood assembly to the wall using screws (A, 2x (2.9x6.5mm)).

    Visual Description: Shows screws (A) being used to fix the entire hood structure to the wall.

15. Step 15: Connect the Ø 150 mm flexible ducting to the chimney outlet.

    Visual Description: Shows flexible ducting being connected to a Ø 150 mm outlet on the chimney.

16. Step 16: Assemble electrical components (T1, T2, T3) with bracket (O3) and secure using fasteners (P3, 2x (2.9x7.5mm)). This step appears to relate to optional accessories or internal wiring.

    Visual Description: Shows three electrical components (T1, T2, T3) being connected to a bracket (O3) and secured with screws. A shopping cart icon ? is present, possibly indicating an accessory purchase.

17. Step 17: Connect flexible ducting (L, 2x) to the assembly.

    Visual Description: Shows flexible ducting (L) being attached to a component.

18. Step 18: Attach the chimney section (N1) to the assembly.

    Visual Description: Shows chimney section (N1) being attached to the main unit.

19. Step 19: Secure the chimney section (N1) using screws (B, 4x (2.9x9.5mm)).

    Visual Description: Shows screws (B) being used to fasten the chimney section (N1).

20. Step 20: Attach the second chimney section (N2) over the first section.

    Visual Description: Shows the second chimney section (N2) being placed over the first.

21. Step 21: Secure the hood assembly to the wall using screws (A, 2x (2.9x6.5mm)).

    Visual Description: Shows screws (A) being used to fix the entire hood structure to the wall. A magnifying glass ? highlights the screw detail.

22. Step 22: Attach the filter component (W, 2x).

    Visual Description: Shows two filter components (W) being attached to the underside of the hood. A magnifying glass ? highlights the attachment mechanism.

23. Step 23: Attach mounting plates (C, 3x) to the underside of the hood or ceiling structure using screws (A, 6x (2.9x6.5mm)).

    Visual Description: Shows three mounting plates (C) being attached to a surface using screws (A).

24. Step 24: Attach the filter component (P) using fasteners (P4, 2x).

    Visual Description: Shows a filter component (P) being attached using fasteners (P4).

25. Step 25: Attach the filter component (W, 2x).

    Visual Description: Shows two filter components (W) being attached to the underside of the hood. A magnifying glass ? highlights the attachment mechanism. A shopping cart icon ? is present.

Final Checks: Ensure all components are securely attached and the hood is stable. The final steps involve attaching filter components (W) and ensuring the chimney cover (Z) is correctly positioned.

Visual Description: Shows final assembly steps, including attaching filters (W) and positioning the chimney cover (Z).