GRUNDFOS INSTRUCTIONS
UP, UPS, UPN, UPSN, UP(S) CIL2
Important Safety Information
ⓘ This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
? Indicates potential hot surfaces or fluids.
⚡ Indicates electrical hazards.
✋ Indicates user maintenance or cleaning procedures.
Note: This document contains safety warnings in multiple languages. The primary language version (English) is provided here.
Technical Specifications
| Parameter | Specification |
|---|---|
| Max. Pressure | 1.0 MPa (10 bar) |
| Noise Level | < 43 dB(A) |
| Operating Temperature | Min. / Max. 0 °C / +40 °C |
| Humidity | Max. 95% RH |
| IP Rating | UP(S), UP(S)N, UP(S) CIL2: IPX2/IPX4 UP(S)K: IPX2D |
| Max. Head | Hmax 0.7 - 7 (m) |
| Operating Temperature (Specific Models) | UP(S), UP(S)N, UP(S) CIL2: Min./Max. +2 °C / +95/110 °C UP(S) K, UP(S) KU: Min. / Max. -25 °C / +95 °C |
Installation Guidance
Installation Orientation: The pump can be installed vertically or horizontally. Diagrams show correct orientations with checkmarks (✔️) and incorrect orientations with crosses (❌).
Pipe Connection: Connect the pump to the pipework. Ensure correct union materials are used based on the pump model (Cast Iron or Brass unions available). A maximum torque of 30 Nm is specified for the UP(S) CIL2 model during connection.
Mounting: The pump housing is secured using screws. Follow the visual steps to attach components and ensure a secure fit.
Electrical Connection: Connect the power supply according to local regulations. Ensure the correct wire gauge is used (Ø5 mm to Ø10 mm, max 1.5 mm²). Terminal connections are shown, requiring a minimum wire stripping length of 3 mm for L, N, L1, L2, L3 connections.
Disposal Information
The symbol of a crossed-out wheelie bin (?️) indicates that the product must be disposed of separately from household waste. Take the product to a designated collection point for electronic waste to protect the environment and human health.
Declarations of Conformity
Grundfos declares that the UP, UPS, UPN, UPSN, and UP(S) CIL2 series pumps comply with relevant EU and UK regulations and directives, including Low Voltage Directive (2014/35/EU), RoHS Directives (2011/65/EU and 2015/863/EU), and applicable standards such as EN 60335 series and IEC 63000.
Hazardous Substance Information
A table indicates the presence of hazardous substances (Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6+), Polybrominated Biphenyls (PBB), Polybrominated Diphenyl Ethers (PBDE)) in various pump components. 'O' indicates the substance is below the regulatory limit, while 'X' indicates it exceeds the limit in at least one homogeneous material of the component.
Manufacturer Information
Brand: Grundfos
Manufacturer: GRUNDFOS Holding A/S
Address: Poul Due Jensens Vej 7, DK-8850 Bjerringbro, Denmark
Contact: Tel: +45 87 50 14 00
Website: www.grundfos.com
