Home - Clear Design
Installation Guide for CLEAR DESIGN models including: Boost L-Shape Height Adjustable Workstation, Boost, L-Shape Height Adjustable Workstation, Height Adjustable Workstation, Adjustable Workstation
File Info : application/pdf, 22 Pages, 1.34MB
DocumentDocumentBHALGSA BOOST L-SHAPE HEIGHT-ADJUSTABLE WORKSTATION Includes Add-Ons: A1 | A2 | A3 General Installation Guide TABLE OF CONTENTS EDITION CODE BHALGSA :: Workstation ......................................................1 ADD-ONS A1 :: Modesty Panel ................................................................ 7 A2 :: Slim Pedestal ................................................................. 11 A3 :: Cable Tray ..................................................................... 15 WORKSTATION OVERVIEW BOOST L-Shape Height-Adjustable Workstation All parts listed are for a single workstation; additional parts will be needed for additional workstations. PARTS LIST CODE QTY ###### 2 DESCRIPTION Surface BASB72 BFB1 2 Support Bar 2 Flat Bracket 1 WORKSTATION CODE QTY 1 DESCRIPTION Right & Left-Adjustable Beam 1 Inner-Adjustable Beam 1 Feet (Set of 2) 2 23" Arm Bracket 1 Center Post Brackets (L, REAR, & R) 1 Center Post Base 3 Leg with Motor 1 BHALGSA 5 3 1 14 8 2 8 4 39 2 1 Handset Glides Extension Cords (SHRT, MED, & LG) Power Cable Screw (A) Screw (B) Screw (C) Screw (D) Screw (E) Screw (F) Screw (G) Flat Plate 2 WORKSTATION 1 | ASSEMBLE LEG POST SEPARATELY Attach center leg with motor to the center post brackets using screws (A). Then, attach side legs with motor and arm brackets to left and right adjustable beams. Note: Replace the default arm brackets if workstation requires BHA19 or T-brackets. Right Center Post Bracket Left Center Post Bracket Rear Center Post Bracket Right Adjustable Beam Left Adjustable Beam 3 WORKSTATION 2 | ATTACH WORKSTATION FRAME Join all three legs by attaching the inner adjustable beams to the left and right adjustable beams and center post brackets. Keep locking screws (B) loose on the inner adjustable beams to accommodate surface size in step 3. Inner Adjustable Beam 4 WORKSTATION 3 | PLACE FRAME ON SURFACE Secure flat plate, flat bracket(s), and support bars to the surfaces using screws (F). Extend beam to fit table size accordingly. Secure locking screws on the adjustable beam and attach to surface using screws (F). Note: If using surface-mounted dividers, keep the frame 1.5 inches inset from the surface edge. If not using surface-mounted dividers, bring frame flushed to edge of surface. Use additional flat brackets as needed. Support Bar Flat Bracket Flat Plate 5 END OF WORKSTATION SECTION 4 | INSTALL FEET, GLIDERS, AND CONTROL BOX , THEN SECURE POWER. Install feet using screws (D) for outside legs. Install center post base to center leg using screws (E). Mount control box to the adjustable beam using screw (G). Then, secure power cord to the control box. Mount handset using wood screws (C) and attach to control box. If workstation is complete, flip over. Reference handset guide for initialization and operation functions. Center Post Base Control Box 6 A2: MODESTY PANEL OVERVIEW BOOST L-Shape Height-Adjustable Workstation All parts listed are for a single modesty panel; additional parts will be needed for additional modesty panels. 7 MODESTY PANEL PARTS LIST CODE QTY DESCRIPTION 1 Laminate Modesty Panel* GLMP## 4 Machine Screws 2 L-Brackets BMPBFB 4 Wood Screws* *NOTE: For Steel Modesty Panel: components may vary, but process is similar. 8 MODESTY PANEL 1 | SECURE BRACKETS TO MODESTY PANEL Connect the BMPBFB bracket to the modesty panel using screws. Secure tightly. NOTE: If modesty panel does not have pre-drilled holes, use wood screws instead of machine screws. 9 END OF MODESTY PANEL SECTION 2 | ATTACH MODESTY PANEL TO SURFACE Attach modesty panel to surface using wood screws provided with brackets. Panel will be center aligned and flushed with back of surface. 10 A3: SLIM PEDESTAL OVERVIEW BOOST L-Shape Height-Adjustable Workstation All parts listed are for a single slim pedestal; additional parts will be needed for additional slim pedestals. 11 SLIM PEDESTAL PARTS LIST CODE QTY DESCRIPTION 1 BFSLM.SM 1 Large Mounting Bracket Small Mounting Bracket BFSLM 1 Slim Pedestal 8 BFSLM.HW 10 Machine Screw Wood Screw 12 SLIM PEDESTAL 1 | SECURE BRACKETS TO SLIM PEDESTAL Align large mounting bracket to front of pedestal and align small mounting bracket to back. Secure both brackets using provided screws. 13 END OF SLIM PEDESTAL SECTION 2 | ATTACH SLIM PEDESTAL TO SURFACE Secure pedestal to surface using wood screws. The pedestal brackets will connect on either side of the center beam. 14 A4: CABLE TRAY OVERVIEW BOOST L-Shape Height-Adjustable Workstation All parts listed are for a single cable tray; additional parts will be needed for additional cable trays. 15 CABLE TRAY PARTS LIST CODE QTY DESCRIPTION BHCT 1 Surface-Mount Cable Management Tray 10 Wood Screws 16 CABLE TRAY 1 | EXTEND CABLE TRAY TO DESIRED LENGTH Extension range: 25"45". 17 END OF CABLE TRAY SECTION 2 | ATTACH CABLE TRAY TO SURFACE Attach cable tray using wood screws. 18 1-866-304-7197 | inspire@mycleardesign.com | mycleardesign.com © 2022 Clear Design | Version 22.1.3