Shenzhen Qiqin Technology A6 Handheld Selfie Stick Head User Manual

Product Overview

This manual provides instructions for the Shenzhen Qiqin Technology A6 Handheld Selfie Stick Head. It covers operation, features, specifications, and troubleshooting.

Key Features and Components

The A6 Handheld Selfie Stick Head includes:

• Gimbal Stabilizer
• Detachable Remote Control
• Tripod
• Fill Light
• Type-C Charging Port

Operation Instructions

Remote Control

Power: Long press for 2 seconds to switch the device on/off.

Photo/Video: Click to take a photo or start/stop video recording.

Gimbal Modes:

• Click: Switches between horizontal and vertical screen orientation.
• Double-click: Activates Clockwise Dreamspace Mode.
• Three strikes: Activates Counterclockwise Dreamspace Mode.
• Click: Activates POV half-following mode.
• Double-click: Cancels POV mode.

Gimbal Clamp Usage

Pull the ring of the clamp outwards to lock the gimbal as a selfie stick. Slide up to secure. Swipe down to unlock the gimbal as a stabilizer.

Dreamspace Mode

This mode allows for specific rotational movements of the phone for creative shots. Details on rotation angles for landscape and portrait modes are provided.

Gimbal Charging

Use the Type-C charging port. When the gimbal power is low, three white lights flash. The white lights flash gradually while charging and remain solid when fully charged.

Fill Light Function

On/Off: Long press the button.

Mode/Brightness: Single click to set lighting mode and brightness.

Flash Mode: Double-click to activate flash mode.

Lighting Modes: White light (soft, medium, strong), Warm light (soft, medium, strong), Mixed light (soft, medium, strong).

Charging: The fill light uses a Type-C interface. A red light indicates charging, and it turns off when fully charged.

Removable Fill Light Installation

Remove the fill light from the selfie stick, rotate it 180° horizontally and vertically. Align it with the grooves on the selfie stick and slide down to fix it.

Tripod Usage

Open the tripod outwards at the bottom of the handle.

Wireless Pairing

1. Turn on the device by long-pressing the camera button for 2 seconds.

2. Enter pairing mode by long-pressing the photo button. The indicator light flashes. Search for "Gimbal" on your phone to connect. A solid green light indicates a successful connection.

3. The camera button functions: long press to switch on/off, click to take photos or videos.

4. The device automatically shuts down after 10 minutes of inactivity without pairing.

5. When connected to a phone, the device enters sleep mode after 10 minutes of inactivity.

6. To power off, press and hold the camera button for 2 seconds.

7. Low battery indicator: The button battery flashes every 0.5 seconds when below 2.6V.

Specifications

• Main Material: ABS + Aluminum Alloy
• Mount Holder: 108.7-150.4mm
• Folded Length: 180mm
• Extended Length: 790mm
• Product Size: 180x40.9x70.5mm
• Product Weight: 240g
• Remote Control Battery: CR1632 (replaceable)
• Gimbal Battery: 400mAh
• Working Voltage: 3.7V
• Charging Voltage: DC5V
• Charging Current: 500mA

Compatibility and Reminders

• Compatible with Android 4.4 and above & iOS 5.1 and above.
• Ensure the phone's camera is on the same side as the power button.
• If the system's "volume button function" is changed in the phone's camera settings, reset it to default or "take a picture" for the selfie stick to work.
• Ensure the phone is held tightly by the clip.
• Gimbal Stabilizer Mode is best used with 3 rods extended.
• Selfie Stick Mode is recommended with 5 rods extended.

Regulatory Information

FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Certifications

FC CE ROHS