User Guide for Sonicgrace models including: SG-S3 Pro Comfo Head Strap for Quest 3, SG-S3 Pro, Comfo Head Strap for Quest 3, Strap for Quest 3, Quest 3

S3 Pro说明书-20240523

sungale

Product Manual

Sonicgrace S3 Pro Magnetic-Battery Head Strap

S3 Pro说明书

26 nov 2024 — 2. It is impo ant that you carefully read the Health and Safety Guide enclosed with your. VR headset in addition to these warning before using your VR system ...


File Info : application/pdf, 1 Pages, 1.89MB

PDF preview unavailable. Download the PDF instead.

5e05129b6ecd788f9b4364f57712445ad741dec3 manual 1 SGES3PRO
100.00 mm

 

80.00 mm
VR Comfo Head Strap for Quest 3

USER GUIDE

Model:SG-S3 Pro

909-465-0887

cs@sonicgracehome.com sonicgracedesign.com

Copyrighted code and contained herein Copyright 2023 Sonicgrace. Specifications shown are subject to change without notice. Reproduction in whole or in part without pormission is prohibited.

What's in the Box? 

1. Strap Body 

2. Rear Brace 
VR Cfoomr fQoueHste3ad Strap USER GUIDE

3. Top Strap 

4. VR Power Bank VR 

5. User Guide 

VR Power Bank VR 

Indicator Light
Charging: LED Flashe
Fully Charged:Four LED lights up  LED LED4

Ambient Light 
Button: Click to check batte level.   
USB Tpye-C Charging Po (Only used to charge VR Power Bank) USB Type-C VR




Batte Status Display 

Run Out of Batter Over temperature
Over current Over voltage

LED1-4 Flashes



1%

LED1 Flashes



1%~25%

LED1 Lights up



25%~50%

LED1-2 Lights up



50%~75%

LED1-3 Lights up



75%~100%

LED1-4 Lights up

Safety Guidelines 
1. DO NOT allow the product to come into contact with any kind of liquid. 
2. DO NOT leave the product out in the rain or near a source of moisture. 
3. DO NOT drop the product into water. 
4. If the inside of the batte comes into contact with water, chemical decomposition may occur, potentially resulting in the batte catching on re, and may even lead to an explosion.  
5. Put out any product re using water, sand, re blanket, or a d powder re extinguisher. 
6. The product should be used in temperatures from 0°C to 45°C(32°Fto 113°F). 0°C45°C32°F113°F
7. Use of the product in environments above 45°C(113°F)can lead to a re or explosion. 45°C113°F
8. Use of the product below 0 °C(32°F can lead to permanent damage. 0°C32°F
9. Never disassemble or pierce the product in any way or the batte may leak, catch re, or explode.  
10. DO NOT drop or strike the product DO NOT place heavy objects on the product. 
11. DO NOT heat the product. 
12. DO NOT put the product in a microwave oven or in a pressurized container. 
13. DO NOT leave the product near heat sources such as a furnace or heater. 
14. DO NOT leave the product inside of a vehicle on hot days. 
15. The ideal storage temperature is 22 to 28°C(72°Fto82°F). 22°C28°C72°F82°F

DO NOT charge mobile phones/tablets

DO NOT immerse in water

DO NOT throw into re

Speci cations
Model: SG-S3 Pro Material: Rear Brace(TPU), Cushioned Top Strap(PU), Shell(PC+ABS) Batte Type: Lithium lon Polymer Nominal Capacity: 8000mAh/29.6Wh Input: 5V/3A,9V/2.22A,12V/1.67A (Max.) Power Bank Output: 5V/3A,9V/2.22A,12V/1.67A (Max.) Operating Temperature: 0~45° Storage Temperature: -10~45° Humidity Range: <75% RH

Distributed by: Sonicgrace, Inc. Address: 13909 Magnolia Ave, Chino, CA 91710

EC

REP

SINO-SEAR GmbH Feuerbachstrasse 11,14471 Potsdam,Germany Tel: +49 331 9513 0908 E-Mail: info@sino-sear.com

FR

Éléments

BAC

d'emballage

DE TRI

Designed in USA Made in China

Scatola PAP 21 Raccolta ca a

Etichetta PET 1
Raccolta plastica

Charge the VR Power Bank VR
Use the ORIGINAL Meta Quest 3 power adapter to charge the VR power bank for a better charging experience. During charging, you will see the power indicators ashing. When fully charged, all four indicators will stay lit. Meta Quest 3 VR   4
Installation Steps 
2

L

R

1. Fasten the rear brace into the strap body according to the corresponding letters R and L. When the rear brace is installed in place, you will hear a crisp "click" sound.
RL    

2. Pull the face cushion pad from the Quest 3.
Quest3 

4
1 3
3. Install the , ,  and  pa s in turn.     

4. Reinse the face cushion pad back to Quest3.
 Quest3

Align the charging metal contacts
5. Inse the VR power bank into the strap body. Plug the USB-C cable into the Quest3. If you hear a drop, Indicates that the VR power bank is connected to the strap body. NOTE: The power bank will generate heat during fast charging, which is a normal phenomenon.
VRUSB-C Quest3   

Health Warnings 
1. To reduce the risk of personal inju , discomfo or prope y damage, please ensure that all users of theses accessories carefully read the warnings below.  
2. It is impo ant that you carefully read the Health and Safety Guide enclosed with your VR headset in addition to these warning before using your VR system. VR 
3. Read and follow all setup and operating instructions provided with the headset. 
4. Follow instructions for installing the Head strap on your headset. 
5. These accessories are not toys and should not be used by children under the age of 13. 13 
6. To avoid transferring contagious conditions(like pink eye), do not share the headset or either of these accessories with persons with contagious conditions, infections or diseases, pa icularly of the eyes, skin, or scalp.   
7. The headset and accessories should be cleaned between each use with skin-friendly non-alcohol, non-abrasive antibacterial wipes.  
8. Replace the Head strap if it becomes worn or cannot be cleaned. 
9. Stop using the headset if you notice swelling, itchiness, skin irritation, loss of hair or other skin reactions. If symptoms persist, contact a doctor.   



References

Corel PDF Engine Version 25.0.0.230 CorelDRAW 2024