Ancel AD410 OBD2 Scan Tool User Manual
Your guide to diagnosing vehicle issues with the Ancel AD410.
Introduction
The Ancel AD410 is a professional OBD2 scan tool and code reader designed for DIY enthusiasts and professional mechanics. It provides comprehensive diagnostic capabilities for a wide range of vehicles, helping you identify engine issues, read and clear trouble codes, and monitor vehicle performance.
Package Contents
- Ancel AD410 Scan Tool
- OBDII Cable
- USB Cable
- User Manual
- Carrying Pouch
Product Overview
The AD410 features a 2.4-inch TFT color display for clear readability. Its intuitive interface allows for easy navigation through diagnostic functions. The device connects to the vehicle's Data Link Connector (DLC) using the included OBDII cable.
Key Components:
- Display: 2.4" TFT 262K true color screen.
- OBD II Connector: Connects the scan tool to the vehicle's DLC.
- USB Port: For software updates and data transfer.
- Navigation Buttons: Up, Down, Left, Right, OK, and Exit buttons for operating the tool.
Getting Started
- Ensure the vehicle's ignition is OFF.
- Locate the vehicle's OBDII Data Link Connector (DLC), typically found under the dashboard on the driver's side.
- Connect the OBDII cable from the AD410 scan tool to the vehicle's DLC.
- Turn the vehicle's ignition ON. The scan tool will power up and display the main menu.
Diagnostic Functions
The AD410 supports various OBDII functions:
Reading Diagnostic Trouble Codes (DTCs)
Navigate to the "Read Codes" function. The tool will scan the vehicle's systems and display any stored, pending, or permanent DTCs. Each code will be accompanied by a description.
Clearing Codes
After addressing the issues indicated by the DTCs, you can use the "Clear Codes" function to erase them from the vehicle's computer. This will also clear the Malfunction Indicator Lamp (MIL).
Viewing Live Data
Access real-time sensor data from the vehicle's engine control module (ECM). This includes parameters like engine RPM, coolant temperature, speed, and more.
I/M Readiness Status
Check if the vehicle's emission-related systems have completed their diagnostic self-tests. This is crucial for emissions testing.
Freeze Frame Data
View a snapshot of the vehicle's operating conditions at the moment a DTC was detected. This data can help pinpoint the cause of the fault.
Supported Protocols
The Ancel AD410 supports all major OBDII protocols, including:
- SAE J1850 PWM
- SAE J1850 VPW
- ISO 9141-2
- KWP2000 (ISO 14230)
- CAN (ISO 15765)
Specifications
- Display: 2.4" TFT, 262K color
- Resolution: 320x240
- Power Supply: 8-18V vehicle power
- Operating Temperature: 0°C to 50°C (32°F to 122°F)
- Supported Languages: English, Chinese (Simplified and Traditional)
Troubleshooting & Support
For issues such as the tool not powering on, refer to the "Getting Started" section. If the tool cannot communicate with the vehicle, ensure the OBDII cable is securely connected and the vehicle's ignition is ON. For further assistance, visit the Ancel official website.
Website: https://www.anceltech.com
