InfinitiPRO by Conair CS1000 Tourmaline Ceramic Flat Iron

Important Safety Instructions

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS BEFORE USING

KEEP AWAY FROM WATER

DANGER – Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

• Always unplug appliance immediately after using.
• Do not use while bathing or in the shower.
• Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not place in, or drop into water or other liquids.
• If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

• This appliance should never be left unattended when plugged in.
• Do not pull, twist, or wrap line cord around appliance.
• This appliance should not be used by, on or near children or individuals with certain disabilities.
• Use this product only for its intended use, as described in this manual. Only use attachments/accessories recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to an Authorized Service Center for examination and repair.
• Keep the cord away from heated surfaces.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Unit is hot when in use. Do not let heated surface touch eyes or skin.
• Do not place the heated unit directly on any surface while it is hot or plugged in.
• Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of hair, lint and other debris.
• Do not use an extension cord with this appliance.
• Do not touch hot surfaces of the appliance. Use handles or knobs.
• Do not attempt to touch the housing of your appliance near the plates, as it is hot when in use.
• This appliance is not a toy. Keep away from children.
• Do not use with a voltage converter.

SAVE THESE INSTRUCTIONS

WARNING: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG SMALL APPLIANCES

Operating Instructions

This appliance is intended for household use. Use on Alternating Current (60 hertz) only. This unit is designed to be operated at 120V AC.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

NOTE: Do not use this styling appliance on hair extensions.

Getting Started & Switch Activation Control

IMPORTANT! This appliance features delayed activation control. Immediately after turning the appliance on, you are able to adjust the temperature. After 5 seconds of the appliance being turned on, the control buttons will automatically lock. To adjust the controls, hold down the heat control buttons "HIGH" or "LOW" button for 1-2 seconds. This will deactivate the lock mode and allow the settings to be changed. To turn off the appliance while in lock mode, hold down the ON/OFF button until the appliance switches off.

1. Plug the iron cord into any household outlet (120V).
2. Press and hold the ON/OFF button for approximately 1 second to turn the appliance on. The unit will heat up very quickly.
3. Press HIGH or LOW button to select your desired temperature.
4. Once the temperature has stopped blinking on the LED, the unit is ready to use.
5. To turn unit off, press and hold the power ON/OFF button again until light goes off.

WARNING: The iron's plates will get very hot within a few seconds and should not be placed in contact with the skin after the iron has been turned on.

Styling with Tourmaline Ceramic, Easy-Glide Floating Plates

Both plates of your new flat iron are designed with a little give to "float" in the iron. This provides better contact with hair and eliminates gaps to achieve straighter results faster. The plates of your new flat iron have a tourmaline ceramic, easy-glide surface, the newest technology. This means it's not only simpler to clean off styling product residue, etc., after each use, but you'll find that hair glides easily over the surface of the plates as you straighten. The tourmaline ceramic surface also helps smooth down flyaways and frizzies. It evenly distributes heat so that the style you create has a salon-perfect, silky smooth, shiny finish. Hair also slips right off the plates after it's straightened. The new tourmaline ceramic technology is a pleasure to work with and makes styling your hair easier and the results more professional.

How to Straighten Hair

1. Hair should be clean and completely dry before using the flat iron. For best results, use a light styling product before blow-drying hair.
2. Start with a hair section that is 1½ inches wide and no more than ½ inch thick.
3. Open the iron and place the hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together.
4. While maintaining the tension, slowly pull the unit down along the hair section toward the ends. At the ends, release the pressure on the handle and allow the hair to slide out.
5. Repeat the process on additional sections of hair until you achieve the hairstyle you desire. It may be necessary to repeat the process on certain areas, depending on the texture of your hair.

Some experience is necessary when learning to use this flat iron. After using the iron several times, you will learn the ideal way to straighten and style your hair.

Add Volume and Shape

To add flips and waves, secure ends between plates and wrap hair around the outer housing. It's an easy way to add shape to straight styles. Turn your wrist up or under to create flips and add curl or more body.

NOTE: Never leave your flat iron on and unattended. However, should you fail to turn the iron off, it will shut itself off automatically within 60 minutes.

Ionic Technology

The styler also includes a powerful, high-voltage ion generator. The advanced ion generator generates up to 50% more ions to:

• Reduce flyaways and frizzy hair
• Eliminate static electricity
• Enhance shine

NOTE: The unit may produce a clicking sound at times, which is normal for a high-output ion generator.

The iron's unique 5 ultra-high heat temperature settings and instant heat technology provide styling versatility for all hair types. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy or hard-to-curl hair, keep the heat setting on high. You can vary the iron's temperature according to your particular need!

Temperature Setting Guide

Get to Know Your Flat Iron

Key Components:

• Tourmaline Ceramic-Coated Plates: Provide smooth gliding and even heat distribution.
• Temperature Select Buttons: For adjusting heat settings.
• Power ON/OFF Button: To turn the unit on and off.
• Swivel Line Cord: For tangle-free use.
• Auto Off: Safety feature that shuts down the unit after 60 minutes of inactivity.
• Single Voltage: Designed for 120V AC household outlets.
• 5 Temperature Settings: Allows for versatile styling based on hair type.

User Maintenance

Your appliance is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool, and wipe exterior with a cloth.

If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an Authorized Service Center only. No repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

Storage

When not in use, your appliance is easy to store. Allow appliance to cool, then simply store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance.

Limited Five-Year Warranty (U.S. and Canada Only)

Conair will repair or replace (at our option) your unit free of charge for 60 months from the date of purchase if the appliance is defective in workmanship or materials.

To obtain service under this warranty, return the defective product to the service center listed on back, together with your purchase receipt. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 60 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 60-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Compliance Information

Federal Communications Commission (FCC) Notice

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Supplier's Declaration of Conformity

Brand: InfinitiPRO by Conair®

Model No.: CS1000

Description: Flat Iron

Responsible Party: Conair LLC, 1 Cummings Point Road, Stamford, CT 06902 (203) 351-9000

Standards: FCC Part 15 Subpart B, ANSI C63.4-2014

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

DATE OF ISSUE: MM/DD/YYYY (model CS1000 – all versions)

Resources & Tips

Beauty Tips

To achieve the looks you love and for more great InfinitiPRO by Conair® products, visit infiniti.conair.com

Product Registration & Information

Please register this product at www.conair.com/registration

For info on any Conair or InfinitiPRO by Conair product, call 1-800-3-CONAIR or visit us on the web at www.conair.com/infiniti

Service Center

Conair LLC
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307

©2021 Conair LLC

IB-17464

21PA081100