BEGA B84155 In-grade Luminaire Wall Washer

Application

An in-grade luminaire designed for installation in concrete or soil, providing a uniform wall wash effect. It is engineered to withstand pressure loads up to 4,400 lbs. from vehicles with pneumatic tires. This luminaire is not intended for use in traffic lanes where it may be subjected to horizontal pressure from braking, accelerating, or changing vehicle directions.

Materials

Clear safety glass
316 grade stainless steel
High temperature silicone gasket
Mechanically captive stainless steel fasteners
Fully potted waterstopper cable
Pure anodized aluminum reflector surface

Standards & Protection

NRTL listed to North American Standards, suitable for wet locations.

Protection class: IP 68

Specifications

Weight

14.1 lbs.

Electrical

Operating voltage: 120-277VAC
Minimum start temperature: -20°C
LED module wattage: 27.4W
System wattage: 32.0W
Controllability: 0-10V dimming down to 0.1%
Color rendering index: Ra > 80
Luminaire lumens: 2941 lm
LED service life (L70): 60000 hrs

LED Color Temperature Options

[ ] 4000K (K4)
[ ] 3500K (K35)
[ ] 3000K (K3)
[ ] 2700K (K27)

Finish

#4 brushed stainless steel. Custom colors are not available.

Included (available for pre-shipment)

B688 Installation housing

Visual Description

A high-resolution image shows a BEGA B84155 in-grade luminaire. It is a cylindrical fixture made of brushed stainless steel, with a circular, recessed glass lens on top. The lens has a textured or patterned interior, likely for light diffusion. The fixture tapers slightly towards the base, designed to be installed flush with the ground.

A cross-section diagram illustrates the installation of the in-grade luminaire. It shows the luminaire embedded within concrete or soil. Dimensions are indicated: 'A' represents the luminaire's diameter/width, 'B' its depth, and 'C' its height. The diagram shows a mounting collar or housing.

Model Dimensions & Specifications

Model	LED	Beam Angle	A	B	C
B84155	27.4W	55°×41°	12⁷⁄₈	15¹⁄₂	10

Product Availability & Support

BEGA can supply suitable LED replacement modules for up to 20 years after the purchase of LED luminaires. For details, please visit the BEGA website.

	BEGA B84287 In-Grade Luminaire - Location Luminaire Technical Specifications Detailed technical specifications for the BEGA B84287 in-grade location luminaire, designed for architectural and signage illumination. Features include robust construction, high-quality materials, IP67 protection, and 0-10V dimmability.
	BEGA B55942 Downlight - Symmetric Technical Specifications Detailed technical specifications for the BEGA B55942 Symmetric Downlight, a semi-recessed ceiling luminaire featuring a partially frosted crystal glass diffuser, marine-grade aluminum construction, and 0-10V dimming capabilities. Suitable for wet locations and rated IP65.
	BEGA In-grade Luminaire B84286 - Location Luminaire Technical Specification Detailed technical specifications for the BEGA B84286 in-grade location luminaire, designed for architectural and wayfinding illumination. Includes application, materials, electrical data, LED specifications, dimensions, and available options.
	BEGA B24593 Wall Luminaire: Narrow Beam Upward and Downward Detailed technical specifications for the BEGA B24593 wall luminaire, featuring a narrow beam upward and downward light distribution, marine-grade materials, and various finish options for architectural lighting.
	BEGA B24090 Asymmetric Wall Washer - Technical Specifications Detailed technical specifications for the BEGA B24090 Asymmetric Wall Washer, featuring its application, materials, electrical data, LED color temperature options, finishes, and dimensions.
	BEGA B84277 In-grade Luminaire - Asymmetric Specifications Discover the BEGA B84277 in-grade luminaire, featuring patented Vortex Optics® for architectural illumination. This spec sheet details its robust construction, IP 67 rating, dimmable LED performance, and material specifications for demanding applications.
	BEGA B22383 Wall Washer - Lateral Throw \| Technical Specifications Detailed technical specifications for the BEGA B22383 Wall Washer with Lateral Throw, featuring LED technology, durable finishes, and suitability for wet locations. Includes application, materials, electrical data, and dimensions.
	BEGA B33158 Recessed Wall Luminaire - Technical Specification Technical specifications for the BEGA B33158 recessed wall luminaire, featuring unshielded light for wayfinding, marine-grade aluminum, BEGA Tricoat® finish, and 0-10V dimmability. Details on materials, electrical specs, LED color temperatures, finishes, and dimensions.

BEGA In-grade Luminaire · Wall Washer