iHome | Premium Audio Products & Innovative Sound Solutions
User Guide for iHOME models including: iCVBT9W Beauty Reflect Split Mirror And Bt Speaker, iCVBT9W, Beauty Reflect Split Mirror And Bt Speaker, Split Mirror And Bt Speaker, Mirror And Bt Speaker, Speaker
SDI Technologies Inc. ICVBT9A iHome Beauty REFLECT SPLIT Mirror and BT speaker EMOICVBT9A EMOICVBT9A icvbt9a
File Info : application/pdf, 1 Pages, 261.97KB
DocumentDocumentsize: 306mm(W) x 150mm(H) Folded Size: 102 x 150 mm Mat'l: 85gsm, WF paper, 1C + 1C Color: Black text on white background Oct 13, 2023 iCVBT9W.EXv24 Quick Start Guide Charging the Mirror and BT speaker · There are 2 USB-C charging ports for battery charging. One is at the back of mirror for charging the mirror only. Another one is at the right side of BT speaker base for charging BT speaker only. · Dock mirror to charging base (connect the included USB charging cable to the USB-C Charging Port on the BT speaker changing base, the another end of charging cable connect to 5V USB AC adaptor, simultaneously charge the BT speaker base and mirror. Finger Loop LED indicator Using the mirror light function · Tap button to turn the mirror ON or OFF. · Once power on the mirror, tap button to adjust mirror light color mode: White (Cool) / Yellow (Warm) / White/Yellow (Bright)/OFF · Once power on the mirror, press and hold button to adjust mirror brightness. Mirror Light button Volume Up/Down buttons USB-C charging cable (included) 5V USB AC adaptor (not included) USB-C charging port Status LED BATTERY STATUS RED OFF Charging fully charged BLUETOOTH STATUS BLUE pairing (flashing) BLUE connected Note: If the battery is very low, it will announce voice prompt "Battery very low". 1 Bluetooth speaker charging base Using the Bluetooth charging speaker - Press and hold button for 2-3 seconds to Bluetooth speaker ON/OFF. - Quick press button to pause or play music. - The first time the unit is powered on it will enter auto-pairing mode. - Select `iHome iCVBT9' on your device to connect BT. - To manually pair with new BT device, press and hold button for 3 seconds. - Press and hold button for 3 seconds to announce battery level voice prompt. - Single press button to volume up. - Single press button to volume down. - Double press button to previous song. - Double press button to next song. - To reset Bluetooth pairing table press and hold and button simultaneously for 3 seconds. Maintenance Suggest to use a cleaning cloth to keep the mirror smudge free. (If more cleaning is needed, unplug the unit and wipe down with a slightly damp cloth.) 2 WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below: · Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances. · Always dispose of used batteries/electronics in accordance with the prevailing community regulations. · Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com GENERAL BATTERY PRECAUTIONS · Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. · Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. · Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit). · Never expose a battery to any liquid. · Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. · Always keep batteries out of the reach of infants and small children. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 2. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 3. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 4. Only use attachments/accessories specified by the manufacturer. 5. Unplug this product during lightning storms or when unused for long periods of time. 6. Damage Requiring Service This product should be serviced by qualified service personnel when: - Plug has been damaged. - Objects have fallen into or liquid has been spilled into the enclosure. - The unit has been exposed to rain. The unit has been dropped or the enclosure damaged. - The unit exhibits a marked change in performance or does not operate normally. 7. No naked flame sources, such as lighted candles, should be placed on this product. 8. Attention should be drawn to the environmental aspects of battery disposal. 9. This product is suitable for use in tropical and/or moderate climates. WARNING: - To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. - Do not dispose of batteries in the household trash or fire. - The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable. - If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage. - Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable. - Sunlight: Never place the mirror in or expose the mirror to direct sunlight. The sun's rays can reflect to become focused and cause excessive heat and/or fire. Do not use mirror in direct sunlight as reflected sunlight could injure eyes. 3 9/29/23 FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC ID: EMOICVBT9A IC: 986B-ICVBT9A Hvin: iCVBT9a This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. · Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. · NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformité. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à utiliser l'équipement. CAN ICES-3(B) / NMB-3(B) 4 Limited One Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please call contact Customer Service at ihome.com/support/contact to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. If proof of purchase cannot be produced, the product will be deemed out-of-warranty. The date of purchase, vendor, product model number, and purchase price must be legible and verifiable. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD's or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. © 2023 SDI Technologies, Inc. All rights reserved. Questions? Visit www.ihome.com iCVBT9-QSG-101323-A Printed in China